All switch models configure the GLOBAL_CONTROL register with slightly
differences.

Assume a common setup to enable the PHY Polling Unit if present, discard
packets with excessive collisions, set the maximum frame size to 1632,
and mask all interrupt sources.

Signed-off-by: Vivien Didelot <vivien.dide...@savoirfairelinux.com>
---
 drivers/net/dsa/mv88e6123.c |  8 --------
 drivers/net/dsa/mv88e6131.c | 11 -----------
 drivers/net/dsa/mv88e6171.c |  9 ---------
 drivers/net/dsa/mv88e6352.c |  9 ---------
 drivers/net/dsa/mv88e6xxx.c | 14 ++++++++++++++
 5 files changed, 14 insertions(+), 37 deletions(-)

diff --git a/drivers/net/dsa/mv88e6123.c b/drivers/net/dsa/mv88e6123.c
index 938d5ca..077fe30 100644
--- a/drivers/net/dsa/mv88e6123.c
+++ b/drivers/net/dsa/mv88e6123.c
@@ -61,14 +61,6 @@ static int mv88e6123_setup_global(struct dsa_switch *ds)
        int ret;
        u32 reg;
 
-       /* Disable the PHY polling unit (since there won't be any
-        * external PHYs to poll), don't discard packets with
-        * excessive collisions, and mask all interrupt sources.
-        */
-       ret = mv88e6xxx_reg_write(ps, REG_GLOBAL, GLOBAL_CONTROL, 0x0000);
-       if (ret)
-               return ret;
-
        /* Configure the upstream port, and configure the upstream
         * port as the port to which ingress and egress monitor frames
         * are to be sent.
diff --git a/drivers/net/dsa/mv88e6131.c b/drivers/net/dsa/mv88e6131.c
index 2c43348..013668c 100644
--- a/drivers/net/dsa/mv88e6131.c
+++ b/drivers/net/dsa/mv88e6131.c
@@ -77,17 +77,6 @@ static int mv88e6131_setup_global(struct dsa_switch *ds)
        int ret;
        u32 reg;
 
-       /* Enable the PHY polling unit, don't discard packets with
-        * excessive collisions, use a weighted fair queueing scheme
-        * to arbitrate between packet queues, set the maximum frame
-        * size to 1632, and mask all interrupt sources.
-        */
-       ret = mv88e6xxx_reg_write(ps, REG_GLOBAL, GLOBAL_CONTROL,
-                                 GLOBAL_CONTROL_PPU_ENABLE |
-                                 GLOBAL_CONTROL_MAX_FRAME_1632);
-       if (ret)
-               return ret;
-
        /* Set the VLAN ethertype to 0x8100. */
        ret = mv88e6xxx_reg_write(ps, REG_GLOBAL, GLOBAL_CORE_TAG_TYPE, 0x8100);
        if (ret)
diff --git a/drivers/net/dsa/mv88e6171.c b/drivers/net/dsa/mv88e6171.c
index fcdb5a7..f7dbf78 100644
--- a/drivers/net/dsa/mv88e6171.c
+++ b/drivers/net/dsa/mv88e6171.c
@@ -93,15 +93,6 @@ static int mv88e6171_setup_global(struct dsa_switch *ds)
        int ret;
        u32 reg;
 
-       /* Discard packets with excessive collisions, mask all
-        * interrupt sources, enable PPU.
-        */
-       ret = mv88e6xxx_reg_write(ps, REG_GLOBAL, GLOBAL_CONTROL,
-                                 GLOBAL_CONTROL_PPU_ENABLE |
-                                 GLOBAL_CONTROL_DISCARD_EXCESS);
-       if (ret)
-               return ret;
-
        /* Configure the upstream port, and configure the upstream
         * port as the port to which ingress and egress monitor frames
         * are to be sent.
diff --git a/drivers/net/dsa/mv88e6352.c b/drivers/net/dsa/mv88e6352.c
index 94a2698..54849f5 100644
--- a/drivers/net/dsa/mv88e6352.c
+++ b/drivers/net/dsa/mv88e6352.c
@@ -144,15 +144,6 @@ static int mv88e6352_setup_global(struct dsa_switch *ds)
        int ret;
        u32 reg;
 
-       /* Discard packets with excessive collisions,
-        * mask all interrupt sources, enable PPU (bit 14, undocumented).
-        */
-       ret = mv88e6xxx_reg_write(ps, REG_GLOBAL, GLOBAL_CONTROL,
-                                 GLOBAL_CONTROL_PPU_ENABLE |
-                                 GLOBAL_CONTROL_DISCARD_EXCESS);
-       if (ret)
-               return ret;
-
        /* Configure the upstream port, and configure the upstream
         * port as the port to which ingress and egress monitor frames
         * are to be sent.
diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c
index 7ec532d..1cba078 100644
--- a/drivers/net/dsa/mv88e6xxx.c
+++ b/drivers/net/dsa/mv88e6xxx.c
@@ -2912,9 +2912,23 @@ int mv88e6xxx_setup_ports(struct dsa_switch *ds)
 
 static int _mv88e6xxx_setup_global(struct mv88e6xxx_priv_state *ps)
 {
+       u16 reg;
        int err;
        int i;
 
+       /* Enable the PHY Polling Unit if present, discard packets with
+        * excessive collisions, set the maximum frame size to 1632, and mask
+        * all interrupt sources.
+        */
+       reg = GLOBAL_CONTROL_DISCARD_EXCESS | GLOBAL_CONTROL_MAX_FRAME_1632;
+       if (mv88e6xxx_has(ps, MV88E6XXX_FLAG_PPU) ||
+           mv88e6xxx_has(ps, MV88E6XXX_FLAG_PPU_ACTIVE))
+               reg |= GLOBAL_CONTROL_PPU_ENABLE;
+
+       err = _mv88e6xxx_reg_write(ps, REG_GLOBAL, GLOBAL_CONTROL, reg);
+       if (err)
+               return err;
+
        /* Set the default address aging time to 5 minutes, and
         * enable address learn messages to be sent to all message
         * ports.
-- 
2.8.2

Reply via email to