Hi Rob,
> On Thu, Apr 28, 2016 at 01:23:07PM +0100, Ramesh Shanmugasundaram wrote:
> > This patch adds support for the CAN FD controller found in Renesas
> > R-Car SoCs. The controller operates in CAN FD only mode by default.
> >
> > CAN FD mode supports both Classical CAN & CAN FD frame formats. The
> > controller supports ISO 11898-1:2015 CAN FD format only.
> >
> > This controller supports two channels and the driver can enable either
> > or both of the channels.
> >
> > Driver uses Rx FIFOs (one per channel) for reception & Common FIFOs
> > (one per channel) for transmission. Rx filter rules are configured to
> > the minimum (one per channel) and it accepts Standard, Extended, Data
> > & Remote Frame combinations.
> >
> > Note: There are few documentation errors in R-Car Gen3 Hardware User
> > Manual v0.5E with respect to CAN FD controller. They are listed below:
> >
> > 1. CAN FD interrupt numbers 29 & 30 are listed as per channel
> > interrupts. However, they are common to both channels (i.e.) they are
> > global and channel interrupts respectively.
> >
> > 2. CANFD clock is derived from PLL1. This is not documented.
> >
> > 3. CANFD clock is further divided by (1/2) within the CAN FD controller.
> > This is not documented.
> >
> > 4. The minimum value of NTSEG1 in RSCFDnCFDCmNCFG register is 2 Tq. It
> > is specified 4 Tq in the manual.
> >
> > 5. The maximum number of message RAM area the controller can use is
> > 3584 bytes. It is specified 10752 bytes in the manual.
> >
> > Signed-off-by: Ramesh Shanmugasundaram
> > <ramesh.shanmugasunda...@bp.renesas.com>
> > ---
> > .../devicetree/bindings/net/can/rcar_canfd.txt | 89 ++
>
> What happened to my ack?
Sorry, I missed it when I updated the patch. I mentioned it in cover letter
though. I will request the CAN maintainer to add it if this is accepted or
otherwise I will add it to the next patch series.
---
Changes since v3:
* Split v3 patch into two (Marc K)
(1) Introduce rcar_canfd.c driver in drivers/net/can/rcar dir
(2) Move rcar_can.c driver to new drivers/net/can/rcar dir
* Added Acked-by Rob H for the bindings
---
Thanks,
Ramesh
