From: Alexander Duyck <[email protected]> We were adding VLAN 0 twice each time we restored the VLAN configuration. Instead of doing it twice we can just start working through the active VLANs from ID 1 on and skip the double write.
Signed-off-by: Alexander Duyck <[email protected]> Tested-by: Phil Schmitt <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]> --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index a01a7f2..297e7d3 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -4172,11 +4172,11 @@ static void ixgbe_vlan_promisc_disable(struct ixgbe_adapter *adapter) static void ixgbe_restore_vlan(struct ixgbe_adapter *adapter) { - u16 vid; + u16 vid = 1; ixgbe_vlan_rx_add_vid(adapter->netdev, htons(ETH_P_8021Q), 0); - for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID) + for_each_set_bit_from(vid, adapter->active_vlans, VLAN_N_VID) ixgbe_vlan_rx_add_vid(adapter->netdev, htons(ETH_P_8021Q), vid); } -- 2.5.5
