Hello. 2016-03-27 22:02 GMT+09:00 Sergei Shtylyov <[email protected]>: > Hello. > > > On 03/22/2016 06:22 PM, Yoshihiro Kaneko wrote: > >> From: Kazuya Mizuguchi <[email protected]> >> >> This patch supports the following interrupts. >> >> - One interrupt for multiple (timestamp, error, gPTP) >> - One interrupt for emac >> - Four interrupts for dma queue (best effort rx/tx, network control rx/tx) >> >> This patch improve efficiency of the interrupt handler by adding the >> interrupt handler corresponding to each interrupt source described >> above. Additionally, it reduces the number of times of the access to >> EthernetAVB IF. >> Also this patch prevent this driver depends on the whim of a boot loader. >> >> [[email protected]: define bit names of registers] >> [[email protected]: add comment for gen3 only registers] >> [[email protected]: fix coding style] >> [[email protected]: update changelog] >> [[email protected]: gen3: fix initialization of interrupts] >> [[email protected]: gen3: fix clearing interrupts] >> [[email protected]: gen3: add helper function for request_irq()] >> [[email protected]: gen3: remove IRQF_SHARED flag for request_irq()] >> [[email protected]: revert ravb_close() and ravb_ptp_stop()] >> [[email protected]: avoid calling free_irq() to non-hooked interrupts] >> [[email protected]: make NC/BE interrupt handler a function] >> [[email protected]: make timestamp interrupt handler a function] >> [[email protected]: timestamp interrupt is handled in multiple >> interrupt handler instead of dma queue interrupt handler] >> Signed-off-by: Kazuya Mizuguchi <[email protected]> >> Signed-off-by: Yoshihiro Kaneko <[email protected]> > > [...] > > Acked-by: Sergei Shtylyov <[email protected]>
Many thanks for your review and much help! > > MBR, Sergei > Thanks, kaneko
