macb_interrupt() should not use macb_writel(bp, ISR, <value>) but only
queue_writel(queue, ISR, <value>).
There is one IRQ and one set of {ISR, IER, IDR, IMR} [1] registers per
queue on gem hardware, though only queue0 is actually used for now to
receive frames: other queues can already be used to transmit frames.
The queue_readl() and queue_writel() helper macros are designed to access
the relevant IRQ registers.
[1]
ISR: Interrupt Status Register
IER: Interrupt Enable Register
IDR: Interrupt Disable Register
IMR: Interrupt Mask Register
Signed-off-by: Cyrille Pitchen <cyrille.pitc...@atmel.com>
Fixes: bfbb92c44670 ("net: macb: Handle the RXUBR interrupt on all devices")
---
drivers/net/ethernet/cadence/macb.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/cadence/macb.c
b/drivers/net/ethernet/cadence/macb.c
index 39447a337149..c9c6b2762a39 100644
--- a/drivers/net/ethernet/cadence/macb.c
+++ b/drivers/net/ethernet/cadence/macb.c
@@ -1146,7 +1146,7 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id)
macb_writel(bp, NCR, ctrl | MACB_BIT(RE));
if (bp->caps & MACB_CAPS_ISR_CLEAR_ON_WRITE)
- macb_writel(bp, ISR, MACB_BIT(RXUBR));
+ queue_writel(queue, ISR, MACB_BIT(RXUBR));
}
if (status & MACB_BIT(ISR_ROVR)) {
--
1.8.2.2
