Leaves 'src-ip' and 'dst-ip' documented as taking x.x.x.x, because there's
more low-level nroff here than I can parse, let alone emit.
Signed-off-by: Edward Cree <ec...@solarflare.com>
---
ethtool.8.in | 29 ++++++++++++++++++++---------
ethtool.c | 4 +++-
2 files changed, 23 insertions(+), 10 deletions(-)
diff --git a/ethtool.8.in b/ethtool.8.in
index 009711d..36da10e 100644
--- a/ethtool.8.in
+++ b/ethtool.8.in
@@ -74,7 +74,7 @@
.\"
.\" \(*NC - Network Classifier type values
.\"
-.ds NC
\fBether\fP|\fBip4\fP|\fBtcp4\fP|\fBudp4\fP|\fBsctp4\fP|\fBah4\fP|\fBesp4\fP
+.ds NC
\fBether\fP|\fBip4\fP|\fBtcp4\fP|\fBudp4\fP|\fBsctp4\fP|\fBah4\fP|\fBesp4\fP|\fBip6\fP|\fBtcp6\fP|\fBudp6\fP|\fBah6\fP|\fBesp6\fP|\fBsctp6\fP
..
.\"
.\" Start URL.
@@ -263,6 +263,7 @@ ethtool \- query or control network driver and hardware
settings
.RB [ src\-ip \ \*(PA\ [ m \ \*(PA]]
.RB [ dst\-ip \ \*(PA\ [ m \ \*(PA]]
.BM tos
+.BM tclass
.BM l4proto
.BM src\-port
.BM dst\-port
@@ -710,6 +711,12 @@ udp4 UDP over IPv4
sctp4 SCTP over IPv4
ah4 IPSEC AH over IPv4
esp4 IPSEC ESP over IPv4
+ip6 Raw IPv6
+tcp6 TCP over IPv6
+udp6 UDP over IPv6
+sctp6 SCTP over IPv6
+ah6 IPSEC AH over IPv6
+esp6 IPSEC ESP over IPv6
.TE
.PP
For all fields that allow both a value and a mask to be specified, the
@@ -734,38 +741,42 @@ Valid only for flow-type ether.
.TP
.BR src\-ip \ \*(PA\ [ m \ \*(PA]
Specify the source IP address of the incoming packet to match along with
-an optional mask. Valid for all IPv4 based flow-types.
+an optional mask. Valid for all IP based flow-types.
.TP
.BR dst\-ip \ \*(PA\ [ m \ \*(PA]
Specify the destination IP address of the incoming packet to match along
-with an optional mask. Valid for all IPv4 based flow-types.
+with an optional mask. Valid for all IP based flow-types.
.TP
.BI tos \ N \\fR\ [\\fPm \ N \\fR]\\fP
Specify the value of the Type of Service field in the incoming packet to
match along with an optional mask. Applies to all IPv4 based flow-types.
.TP
+.BI tclass \ N \\fR\ [\\fPm \ N \\fR]\\fP
+Specify the value of the Traffic Class field in the incoming packet to
+match along with an optional mask. Applies to all IPv6 based flow-types.
+.TP
.BI l4proto \ N \\fR\ [\\fPm \ N \\fR]\\fP
Includes the layer 4 protocol number and optional mask. Valid only for
-flow-type ip4.
+flow-types ip4 and ip6.
.TP
.BI src\-port \ N \\fR\ [\\fPm \ N \\fR]\\fP
Specify the value of the source port field (applicable to TCP/UDP packets)
in the incoming packet to match along with an optional mask. Valid for
-flow-types ip4, tcp4, udp4, and sctp4.
+flow-types ip4, tcp4, udp4, and sctp4 and their IPv6 equivalents.
.TP
.BI dst\-port \ N \\fR\ [\\fPm \ N \\fR]\\fP
Specify the value of the destination port field (applicable to TCP/UDP
packets)in the incoming packet to match along with an optional mask.
-Valid for flow-types ip4, tcp4, udp4, and sctp4.
+Valid for flow-types ip4, tcp4, udp4, and sctp4 and their IPv6 equivalents.
.TP
.BI spi \ N \\fR\ [\\fPm \ N \\fR]\\fP
Specify the value of the security parameter index field (applicable to
AH/ESP packets)in the incoming packet to match along with an optional
-mask. Valid for flow-types ip4, ah4, and esp4.
+mask. Valid for flow-types ip4, ah4, and esp4 and their IPv6 equivalents.
.TP
.BI l4data \ N \\fR\ [\\fPm \ N \\fR]\\fP
Specify the value of the first 4 Bytes of Layer 4 in the incoming packet to
-match along with an optional mask. Valid for ip4 flow-type.
+match along with an optional mask. Valid for ip4 and ip6 flow-types.
.TP
.BI vlan\-etype \ N \\fR\ [\\fPm \ N \\fR]\\fP
Includes the VLAN tag Ethertype and an optional mask.
@@ -779,7 +790,7 @@ Includes 64-bits of user-specific data and an optional mask.
.BR dst-mac \ \*(MA\ [ m \ \*(MA]
Includes the destination MAC address, specified as 6 bytes in hexadecimal
separated by colons, along with an optional mask.
-Valid for all IPv4 based flow-types.
+Valid for all IP based flow-types.
.TP
.BI action \ N
Specifies the Rx queue to send packets to, or some other action.
diff --git a/ethtool.c b/ethtool.c
index b476dcc..a92137f 100644
--- a/ethtool.c
+++ b/ethtool.c
@@ -4158,13 +4158,15 @@ static const struct option {
"Configure Rx network flow classification options or rules",
" rx-flow-hash tcp4|udp4|ah4|esp4|sctp4|"
"tcp6|udp6|ah6|esp6|sctp6 m|v|t|s|d|f|n|r... |\n"
- " flow-type ether|ip4|tcp4|udp4|sctp4|ah4|esp4\n"
+ " flow-type ether|ip4|tcp4|udp4|sctp4|ah4|esp4|"
+ "ip6|tcp6|udp6|ah6|esp6|sctp6\n"
" [ src %x:%x:%x:%x:%x:%x [m %x:%x:%x:%x:%x:%x]
]\n"
" [ dst %x:%x:%x:%x:%x:%x [m %x:%x:%x:%x:%x:%x]
]\n"
" [ proto %d [m %x] ]\n"
" [ src-ip %d.%d.%d.%d [m %d.%d.%d.%d] ]\n"
" [ dst-ip %d.%d.%d.%d [m %d.%d.%d.%d] ]\n"
" [ tos %d [m %x] ]\n"
+ " [ tclass %d [m %x] ]\n"
" [ l4proto %d [m %x] ]\n"
" [ src-port %d [m %x] ]\n"
" [ dst-port %d [m %x] ]\n"
