From: Ram Amrani <ram.amr...@qlogic.com>
Driver learns the inner bar sized from a register configured by management
firmware, but older versions are not setting this register.
But since we know which values were configured back then, use them instead.
Signed-off-by: Ram Amrani <ram.amr...@qlogic.com>
Signed-off-by: Yuval Mintz <yuval.mi...@qlogic.com>
---
drivers/net/ethernet/qlogic/qed/qed_dev.c | 42 +++++++++++++++++++++----------
1 file changed, 29 insertions(+), 13 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c
b/drivers/net/ethernet/qlogic/qed/qed_dev.c
index d9a5175..706c614 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_dev.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c
@@ -32,6 +32,33 @@
#include "qed_sp.h"
/* API common to all protocols */
+enum BAR_ID {
+ BAR_ID_0, /* used for GRC */
+ BAR_ID_1 /* Used for doorbells */
+};
+
+static u32 qed_hw_bar_size(struct qed_hwfn *p_hwfn,
+ enum BAR_ID bar_id)
+{
+ u32 bar_reg = (bar_id == BAR_ID_0 ?
+ PGLUE_B_REG_PF_BAR0_SIZE : PGLUE_B_REG_PF_BAR1_SIZE);
+ u32 val = qed_rd(p_hwfn, p_hwfn->p_main_ptt, bar_reg);
+
+ if (val)
+ return 1 << (val + 15);
+
+ /* Old MFW initialized above registered only conditionally */
+ if (p_hwfn->cdev->num_hwfns > 1) {
+ DP_INFO(p_hwfn,
+ "BAR size not configured. Assuming BAR size of 256kB
for GRC and 512kB for DB\n");
+ return BAR_ID_0 ? 256 * 1024 : 512 * 1024;
+ } else {
+ DP_INFO(p_hwfn,
+ "BAR size not configured. Assuming BAR size of 512kB
for GRC and 512kB for DB\n");
+ return 512 * 1024;
+ }
+}
+
void qed_init_dp(struct qed_dev *cdev,
u32 dp_module, u8 dp_level)
{
@@ -1385,17 +1412,6 @@ err0:
return rc;
}
-static u32 qed_hw_bar_size(struct qed_hwfn *p_hwfn,
- u8 bar_id)
-{
- u32 bar_reg = (bar_id == 0 ? PGLUE_B_REG_PF_BAR0_SIZE
- : PGLUE_B_REG_PF_BAR1_SIZE);
- u32 val = qed_rd(p_hwfn, p_hwfn->p_main_ptt, bar_reg);
-
- /* Get the BAR size(in KB) from hardware given val */
- return 1 << (val + 15);
-}
-
int qed_hw_prepare(struct qed_dev *cdev,
int personality)
{
@@ -1420,11 +1436,11 @@ int qed_hw_prepare(struct qed_dev *cdev,
u8 __iomem *addr;
/* adjust bar offset for second engine */
- addr = cdev->regview + qed_hw_bar_size(p_hwfn, 0) / 2;
+ addr = cdev->regview + qed_hw_bar_size(p_hwfn, BAR_ID_0) / 2;
p_regview = addr;
/* adjust doorbell bar offset for second engine */
- addr = cdev->doorbells + qed_hw_bar_size(p_hwfn, 1) / 2;
+ addr = cdev->doorbells + qed_hw_bar_size(p_hwfn, BAR_ID_1) / 2;
p_doorbell = addr;
/* prepare second hw function */
--
1.9.3
