Begin forwarded message:
Date: Thu, 23 Mar 2006 11:52:03 -0800 From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: [Bugme-new] [Bug 6277] New: System hangs up when using HTB on a Marvell Technology Group Ltd. Yukon Gigabit Ethernet 10/100/1000Base-T Adapter http://bugzilla.kernel.org/show_bug.cgi?id=6277 Summary: System hangs up when using HTB on a Marvell Technology Group Ltd. Yukon Gigabit Ethernet 10/100/1000Base-T Adapter Kernel Version: 2.6.15.1 Status: NEW Severity: high Owner: [EMAIL PROTECTED] Submitter: [EMAIL PROTECTED] Most recent kernel where this bug did not occur: Distribution: Debian Stable (3.1) (sarge) Hardware Environment: /proc/cpuinfo: processor : 0 vendor_id : AuthenticAMD cpu family : 6 model : 10 model name : AMD Athlon(tm) XP 3000+ stepping : 0 cpu MHz : 2105.023 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow bogomips : 4215.10 dmesg: Linux version 2.6.15.1 ([EMAIL PROTECTED]) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #1 Mon Jan 30 20:24:54 EET 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009e800 (usable) BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 511MB LOWMEM available. On node 0 totalpages: 131056 DMA zone: 4096 pages, LIFO batch:0 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 126960 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:0 DMI 2.2 present. Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000) Built 1 zonelists Kernel command line: auto BOOT_IMAGE=Linux ro root=301 Initializing CPU#0 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 2105.023 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 516424k/524224k available (1611k kernel code, 7264k reserved, 429k data, 168k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4215.10 BogoMIPS (lpj=8430218) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 00000000 00000000 00000000 CPU: AMD Athlon(tm) XP 3000+ stepping 00 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfb410, last bus=3 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: nForce2 C1 Halt Disconnect fixup Boot video device is 0000:01:06.0 PCI: Using IRQ router default [10de/01e0] at 0000:00:00.0 PCI: Bridge: 0000:00:08.0 IO window: a000-cfff MEM window: e2000000-e3ffffff PREFETCH window: 30000000-300fffff PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:08.0 to 64 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 eth0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter PrefPort:A RlmtMode:Check Link State forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.48. PCI: Setting latency timer of device 0000:00:04.0 to 64 eth1: forcedeth.c: subsystem: 01043:80a7 bound to 0000:00:04.0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE2: IDE controller at PCI slot 0000:00:09.0 NFORCE2: chipset revision 162 NFORCE2: not 100% native mode: will probe irqs later NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround. NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround. NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: SAMSUNG SP1203N, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: SAMSUNG SP1203N, ATA DISK drive hdd: SAMSUNG SV1204H, ATA DISK drive ide1 at 0x170-0x177,0x376 on irq 15 PDC20268: IDE controller at PCI slot 0000:01:07.0 PDC20268: chipset revision 2 PDC20268: ROM enabled at 0x300b0000 PDC20268: 100% native mode on irq 10 ide2: BM-DMA at 0xb400-0xb407, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0xb408-0xb40f, BIOS settings: hdg:pio, hdh:pio Probing IDE interface ide2... hde: SAMSUNG SV1204H, ATA DISK drive hdf: WDC WD800JB-00CRA1, ATA DISK drive ide2 at 0xa400-0xa407,0xa802 on irq 10 Probing IDE interface ide3... hdg: SAMSUNG SP1203N, ATA DISK drive hdh: MAXTOR 6L080J4, ATA DISK drive ide3 at 0xac00-0xac07,0xb002 on irq 10 SiI3112 Serial ATA: IDE controller at PCI slot 0000:01:0b.0 SiI3112 Serial ATA: chipset revision 2 SiI3112 Serial ATA: 100% native mode on irq 11 ide4: MMIO-DMA , BIOS settings: hdi:pio, hdj:pio ide5: MMIO-DMA , BIOS settings: hdk:pio, hdl:pio Probing IDE interface ide4... hdi: no response (status = 0xfe) Probing IDE interface ide5... hdk: no response (status = 0xfe) hda: max request size: 1024KiB hda: 234493056 sectors (120060 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hdc: max request size: 1024KiB hdc: 234493056 sectors (120060 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(133) hdc: cache flushes supported hdc: hdc1 hdd: max request size: 128KiB hdd: 234493056 sectors (120060 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) hdd: cache flushes supported hdd: hdd1 hde: max request size: 128KiB hde: 234493056 sectors (120060 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) hde: cache flushes supported hde: hde1 hdf: max request size: 128KiB hdf: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100) hdf: cache flushes not supported hdf: hdf1 hdg: max request size: 1024KiB hdg: 234493056 sectors (120060 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100) hdg: cache flushes supported hdg: hdg1 hdh: max request size: 128KiB hdh: 156355584 sectors (80054 MB) w/1819KiB Cache, CHS=65535/16/63, UDMA(100) hdh: cache flushes supported hdh: hdh1 mice: PS/2 mouse device common for all mice device-mapper: 4.4.0-ioctl (2005-01-12) initialised: [EMAIL PROTECTED] u32 classifier NET: Registered protocol family 2 IP route cache hash table entries: 8192 (order: 3, 32768 bytes) TCP established hash table entries: 32768 (order: 5, 131072 bytes) TCP bind hash table entries: 32768 (order: 5, 131072 bytes) TCP: Hash tables configured (established 32768 bind 32768) TCP reno registered ip_conntrack version 2.4 (4095 buckets, 32760 max) - 172 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team nf_hipac: (C) 2002-2003 HIPAC core team (Michael Bellion, Thomas Heinz) nf_hipac: (C) 2004-2005 MARA Systems AB (Michael Bellion) TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 168k freed Adding 289160k swap on /dev/hda2. Priority:-1 extents:1 across:289160k lspci -vvv output: 0000:00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1) Subsystem: Asustek Computer, Inc.: Unknown device 80ac Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=32M] Capabilities: [40] AGP version 2.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=x1 Capabilities: [60] #08 [2001] 0000:00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1) Subsystem: Asustek Computer, Inc.: Unknown device 80ac Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 0000:00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1) Subsystem: Asustek Computer, Inc.: Unknown device 80ac Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 0000:00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1) Subsystem: Asustek Computer, Inc.: Unknown device 80ac Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 0000:00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1) Subsystem: Asustek Computer, Inc.: Unknown device 80ac Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 0000:00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1) Subsystem: Asustek Computer, Inc.: Unknown device 80ac Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 0000:00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4) Subsystem: Asustek Computer, Inc. A7N8X Mainboard Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: [48] #08 [01e1] 0000:00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2) Subsystem: Asustek Computer, Inc.: Unknown device 0c11 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at e800 [size=32] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2- ,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet Controller (rev a1) Subsystem: Asustek Computer, Inc. A7N8X Mainboard onboard nForce2 Ethernet Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (250ns min, 5000ns max) Interrupt: pin A routed to IRQ 12 Region 0: Memory at e5001000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at ec00 [size=8] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME (D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable+ DSel=0 DScale=0 PME- 0000:00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000a000-0000cfff Memory behind bridge: e2000000-e3ffffff Prefetchable memory behind bridge: 30000000-300fffff BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- 0000:00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2) (prog-if 8a [Master SecP PriP]) Subsystem: Asustek Computer, Inc.: Unknown device 0c11 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (750ns min, 250ns max) Region 4: I/O ports at f000 [size=16] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2- ,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Bus: primary=00, secondary=03, subordinate=03, sec-latency=32 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: fff00000-000fffff BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- 0000:01:04.0 Ethernet controller: Marvell Technology Group Ltd. Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (rev 13) Subsystem: Asustek Computer, Inc.: Unknown device 811a Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (5750ns min, 7750ns max), Cache Line Size: 0x08 (32 bytes) Interrupt: pin A routed to IRQ 5 Region 0: Memory at e3800000 (32-bit, non-prefetchable) [size=16K] Region 1: I/O ports at a000 [size=256] Expansion ROM at 30080000 [disabled] [size=128K] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME (D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [50] Vital Product Data 0000:01:06.0 VGA compatible controller: S3 Inc. 86c764/765 [Trio32/64/64V+] (prog-if 00 [VGA]) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 7 Region 0: Memory at e3000000 (32-bit, non-prefetchable) [size=8M] Expansion ROM at 300a0000 [disabled] [size=64K] 0000:01:07.0 Unknown mass storage controller: Promise Technology, Inc. PDC20268 (Ultra100 TX2) (rev 02) (prog-if 85) Subsystem: Promise Technology, Inc. Ultra100TX2 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (1000ns min, 4500ns max), Cache Line Size: 0x08 (32 bytes) Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at a400 [size=8] Region 1: I/O ports at a800 [size=4] Region 2: I/O ports at ac00 [size=8] Region 3: I/O ports at b000 [size=4] Region 4: I/O ports at b400 [size=16] Region 5: Memory at e3804000 (32-bit, non-prefetchable) [size=16K] Expansion ROM at 300b0000 [disabled] [size=16K] Capabilities: [60] Power Management version 1 Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2- ,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:01:0b.0 RAID bus controller: Silicon Image, Inc. (formerly CMD Technology Inc) SiI 3112 [SATALink/SATARaid] Serial ATA Controller (rev 02) Subsystem: Silicon Image, Inc. (formerly CMD Technology Inc) Asus A7N8X Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, Cache Line Size: 0x01 (4 bytes) Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at b800 [size=8] Region 1: I/O ports at bc00 [size=4] Region 2: I/O ports at c000 [size=8] Region 3: I/O ports at c400 [size=4] Region 4: I/O ports at c800 [size=16] Region 5: Memory at e3808000 (32-bit, non-prefetchable) [size=512] Expansion ROM at 30000000 [disabled] [size=512K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2- ,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=2 PME- Software Environment: route --version: net-tools 1.60 route 1.98 (2001-04-15) +NEW_ADDRT +RTF_IRTT +RTF_REJECT +I18N AF: (inet) +UNIX +INET +INET6 +IPX +AX25 +NETROM +X25 +ATALK +ECONET +ROSE HW: +ETHER +ARC +SLIP +PPP +TUNNEL +TR +AX25 +NETROM +X25 +FR +ROSE +ASH +SIT +FDDI +HIPPI +HDLC/LAPB +EUI64 iproute: 20041019-3 Problem Description: Our company owns two identical machines (harware listed above) which work as ftp servers. They have HTB traffic control installed and running. However, when HTB traffic shaping is on and the main device (Yukon gigabit adapter) is in use, the system just hangs up after some days of uptime (varies from 6 to 15 days). The system doesn't react to anything -- there's anly blank screen, ctrl+alt+del doesn't work, just the reset button solves the problem. However, when I turn off the HTB traffic shaper, or set the shaper to work on another device, the problem dissapears, so this is something related to HTB and Yukon gigabit device. The same is on both servers. My traffic shaper script is below: #!/bin/sh stopas() { tc qdisc del dev eth1 root; if [[ -f /tmp/tmp.subnets ]]; then rm -f /tmp/tmp.subnets echo sustabdyta fi } startas() { tc qdisc add dev eth0 root handle 1: htb default 10 r2q 10 tc class add dev eth0 parent 1: classid 1:1 htb rate 99Mbit burst 50k mtu 16400 quantum 1280000 tc class add dev eth0 parent 1:1 classid 1:10 htb rate 99Mbit burst 15k prio 1 mtu 16400 quantum 1280000 tc qdisc add dev eth0 parent 1:10 handle 10: sfq perturb 10 cat /etc/init.d/subnets | sed 's/#.*//g' > /tmp/tmp.subnets for i in `cat /tmp/tmp.subnets | awk '{print $1}'| sort -d | uniq`; do if [[ $i -gt "15000" ]]; then tc class add dev eth1 parent 1:1 classid 1:$i htb rate `echo $i`kbit burst 50k prio 2 quantum 10000 else if [[ "123" -gt "$i" ]]; then tc class add dev eth1 parent 1:1 classid 1:$i htb rate `echo $i`kbit burst 50k prio 2 quantum 1500 else tc class add dev eth1 parent 1:1 classid 1:$i htb rate `echo $i`kbit burst 50k prio 2 fi fi tc qdisc add dev eth1 parent 1:$i handle $i: sfq perturb 10 done while read greitis subnetas do tc filter add dev eth1 parent 1: protocol ip u32 match ip dst $subnetas flowid 1:$greitis; done < /tmp/tmp.subnets echo paleista } if [[ $1 = "stop" ]]; then stopas else if [[ $1 = "restart" ]]; then stopas startas else startas fi fi Steps to reproduce: enable the Yukon device, start the shaping, let the users download and wait 7-15 days and the system will hang up without a notice. ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. - To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
