On Fri, Mar 17, 2006 at 05:13:24PM +0100, Seewer Philippe wrote: > > OK. applied it to 2.6.16-rc6. applies and works flawless. The new > check_media function is subjectively slower than the older code without > it but thats all I found. > > Tested with AT 2700FTX and 2701FTX. Both work and can be reconfigured > with ethtool. Supplying default options like 100full work as well. > > I fiddled with the code a bit and got AUTONEG running. With this > extension our AT FTX cards will work fine. All cards will be configured > by default to use fibre at 100full and the module will use autoneg.
Is this selection of 100Full done with the AT diag routine? > Since the fibre phy ignores settings for autoneg, 100full is not > overridden and works. But copper the phy will do autoneg. Tested and > works (un-/plugging and switching too of course). If I understand correctly, your suggestion is to always have Autoneg selected (options = 0) but the hardware is set by default to use 100Full Fiber. Is that a correct understanding? -- Don Fry [EMAIL PROTECTED] - To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
