Geert Uytterhoeven <[EMAIL PROTECTED]> :
> On Tue, 7 Mar 2006, Ralf Baechle wrote:
[...]
> > I'm just not convinced of having such a workaround as a build option.
> > The average person building a a kernel will probably not know if the
> > option needs to be enabled or not.
>
> Indeed, if it's mentioned in the errata of the chip, the driver should take
> care of it.
Something like the patch below (+Mr Horton Signed-off-by: and description):
diff --git a/drivers/net/tulip/tulip.h b/drivers/net/tulip/tulip.h
index 05d2d96..d109540 100644
--- a/drivers/net/tulip/tulip.h
+++ b/drivers/net/tulip/tulip.h
@@ -262,7 +262,14 @@ enum t21143_csr6_bits {
#define RX_RING_SIZE 128
#define MEDIA_MASK 31
+/* MWI can fail on 21143 rev 65 if the receive buffer ends
+ on a cache line boundary. Ensure it doesn't ... */
+
+#ifdef CONFIG_MIPS_COBALT
+#define PKT_BUF_SZ (1536 + 4)
+#else
#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer. */
+#endif
#define TULIP_MIN_CACHE_LINE 8 /* in units of 32-bit words */
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index c67c912..ca6eeda 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -294,6 +294,8 @@ static void tulip_up(struct net_device *
if (tp->mii_cnt || (tp->mtable && tp->mtable->has_mii))
iowrite32(0x00040000, ioaddr + CSR6);
+ printk(KERN_DEBUG "%s: CSR0 %08x\n", dev->name, tp->csr0);
+
/* Reset the chip, holding bit 0 set at least 50 PCI cycles. */
iowrite32(0x00000001, ioaddr + CSR0);
udelay(100);
@@ -1155,8 +1157,10 @@ static void __devinit tulip_mwi_config (
/* if we have any cache line size at all, we can do MRM */
csr0 |= MRM;
+#ifndef CONFIG_MIPS_COBALT
/* ...and barring hardware bugs, MWI */
if (!(tp->chip_id == DC21143 && tp->revision == 65))
+#endif
csr0 |= MWI;
/* set or disable MWI in the standard PCI command bit.
@@ -1182,7 +1186,7 @@ static void __devinit tulip_mwi_config (
*/
switch (cache) {
case 8:
- csr0 |= MRL | (1 << CALShift) | (16 << BurstLenShift);
+ csr0 |= MRL | (1 << CALShift) | (8 << BurstLenShift);
break;
case 16:
csr0 |= MRL | (2 << CALShift) | (16 << BurstLenShift);
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
