I've bought four new e1000 cards (PCI id 8086:107c, chip label 82541PI),
three of them are working without problems (i386, kernel 2.4.x).

One of them is installed in an AMD64 SMP system (Athlon dual core 4GB).
It gets detected, link is reported to be up, but no data goes through
(in fact _sometimes_ it succeeds to get an IP adress via DHCP after
10-20 retries). If I set an IP manually, I am not able to ping any other
host (ping sizes 30bytes ... 1000bytes).

Tested on kernel 2.6.15, 2.6.16-rc2 and 2.6.16-rc2-git2.

(Un-)setting NAPI does not change anything.

Initially I assumed an IRQ-related issue, but the 3ware RAID controller
works without any problems.

Hajo


+++

0000:00:00.0 RAM memory: nVidia Corporation: Unknown device 02f1 (rev a2)
        Subsystem: Asustek Computer, Inc.: Unknown device 81bf
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Capabilities: [44] #08 [01e0]
        Capabilities: [e0] #08 [a800]

0000:00:00.1 RAM memory: nVidia Corporation: Unknown device 02fa (rev a2)
        Subsystem: Asustek Computer, Inc.: Unknown device 81bf
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

0000:00:00.2 RAM memory: nVidia Corporation: Unknown device 02fe (rev a2)
        Subsystem: Asustek Computer, Inc.: Unknown device 81bf
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

0000:00:00.3 RAM memory: nVidia Corporation: Unknown device 02f8 (rev a2)
        Subsystem: Asustek Computer, Inc.: Unknown device 81bf
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

0000:00:00.4 RAM memory: nVidia Corporation: Unknown device 02f9 (rev a2)
        Subsystem: Asustek Computer, Inc.: Unknown device 81bf
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0

0000:00:00.5 RAM memory: nVidia Corporation: Unknown device 02ff (rev a2)
        Subsystem: Asustek Computer, Inc.: Unknown device 81bf
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Capabilities: [44] #00 [00fe]
        Capabilities: [fc] #00 [0000]

0000:00:00.6 RAM memory: nVidia Corporation: Unknown device 027f (rev a2)
        Subsystem: Asustek Computer, Inc.: Unknown device 81bf
        Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

0000:00:00.7 RAM memory: nVidia Corporation: Unknown device 027e (rev a2)
        Subsystem: Asustek Computer, Inc.: Unknown device 81bf
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

0000:00:02.0 PCI bridge: nVidia Corporation: Unknown device 02fc (rev
a1) (prog-if 00 [Normal decode])
        Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 0x10 (64 bytes)
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 0000f000-00000fff
        Memory behind bridge: fff00000-000fffff
        Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
        Capabilities: [40] #0d [0000]
        Capabilities: [48] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [50] Message Signalled Interrupts: 64bit+
Queue=0/1 Enable-
                Address: 0000000000000000  Data: 0000
        Capabilities: [60] #08 [a800]
        Capabilities: [80] #10 [0141]

0000:00:03.0 PCI bridge: nVidia Corporation: Unknown device 02fd (rev
a1) (prog-if 00 [Normal decode])
        Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 0x10 (64 bytes)
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 0000f000-00000fff
        Memory behind bridge: fff00000-000fffff
        Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
        Capabilities: [40] #0d [0000]
        Capabilities: [48] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [50] Message Signalled Interrupts: 64bit+
Queue=0/1 Enable-
                Address: 0000000000000000  Data: 0000
        Capabilities: [60] #08 [a800]
        Capabilities: [80] #10 [0141]

0000:00:04.0 PCI bridge: nVidia Corporation: Unknown device 02fb (rev
a1) (prog-if 00 [Normal decode])
        Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 0x10 (64 bytes)
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        I/O behind bridge: 0000f000-00000fff
        Memory behind bridge: fff00000-000fffff
        Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
        Capabilities: [40] #0d [0000]
        Capabilities: [48] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [50] Message Signalled Interrupts: 64bit+
Queue=0/1 Enable-
                Address: 0000000000000000  Data: 0000
        Capabilities: [60] #08 [a800]
        Capabilities: [80] #10 [0141]

0000:00:05.0 VGA compatible controller: nVidia Corporation: Unknown
device 0242 (rev a2) (prog-if 00 [VGA])
        Subsystem: Asustek Computer, Inc.: Unknown device 81bf
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
        Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
        Region 3: Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
        Expansion ROM at febe0000 [disabled] [size=128K]
        Capabilities: [48] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [50] Message Signalled Interrupts: 64bit+
Queue=0/0 Enable-
                Address: 0000000000000000  Data: 0000

0000:00:09.0 RAM memory: nVidia Corporation: Unknown device 0270 (rev a2)
        Subsystem: Asustek Computer, Inc.: Unknown device 81c0
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Capabilities: [44] #08 [01e9]
        Capabilities: [e0] #08 [a801]

0000:00:0a.0 ISA bridge: nVidia Corporation: Unknown device 0261 (rev a2)
        Subsystem: Asustek Computer, Inc.: Unknown device 81c0
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0

0000:00:0a.1 SMBus: nVidia Corporation: Unknown device 0264 (rev a2)
        Subsystem: Asustek Computer, Inc.: Unknown device 81c0
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin A routed to IRQ 5
        Region 4: I/O ports at 0600 [size=64]
        Region 5: I/O ports at 0700 [size=64]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:0d.0 IDE interface: nVidia Corporation: Unknown device 0265 (rev
a1) (prog-if 8a [Master SecP PriP])
        Subsystem: Asustek Computer, Inc.: Unknown device 81c0
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0 (750ns min, 250ns max)
        Region 4: I/O ports at ffa0 [size=16]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:10.0 PCI bridge: nVidia Corporation: Unknown device 026f (rev
a2) (prog-if 01 [Subtractive decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=64
        I/O behind bridge: 0000c000-0000cfff
        Memory behind bridge: f9a00000-faafffff
        Prefetchable memory behind bridge: 80000000-800fffff
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
        Capabilities: [b8] #0d [0000]
        Capabilities: [8c] #08 [a800]

0000:00:14.0 Bridge: nVidia Corporation: Unknown device 0269 (rev a1)
        Subsystem: Asustek Computer, Inc.: Unknown device 816a
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0 (250ns min, 5000ns max)
        Interrupt: pin A routed to IRQ 18
        Region 0: Memory at febdc000 (32-bit, non-prefetchable) [size=4K]
        Region 1: I/O ports at dc00 [size=8]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable+ DSel=0 DScale=0 PME-

0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Capabilities: [80] #08 [2101]

0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

0000:04:08.0 Ethernet controller: Intel Corp.: Unknown device 107c (rev 05)
        Subsystem: Intel Corp.: Unknown device 1376
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (63750ns min), Cache Line Size: 0x10 (64 bytes)
        Interrupt: pin A routed to IRQ 17
        Region 0: Memory at faae0000 (32-bit, non-prefetchable) [size=128K]
        Region 1: Memory at faac0000 (32-bit, non-prefetchable) [size=128K]
        Region 2: I/O ports at cc00 [size=64]
        Expansion ROM at 80000000 [disabled] [size=128K]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=1 PME-
        Capabilities: [e4] PCI-X non-bridge device.
                Command: DPERE- ERO+ RBC=0 OST=0
                Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-,
DC=simple, DMMRBC=2, DMOST=0, DMCRS=0, RSCEM-

0000:04:09.0 RAID bus controller: 3ware Inc 3ware 7000-series ATA-RAID
(rev 01)
        Subsystem: 3ware Inc 3ware Inc 3ware 7xxx/8xxx-series PATA/SATA-RAID
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (2250ns min), Cache Line Size: 0x10 (64 bytes)
        Interrupt: pin A routed to IRQ 16
        Region 0: I/O ports at c880 [size=16]
        Region 1: Memory at faa9fc00 (32-bit, non-prefetchable) [size=16]
        Region 2: Memory at fa000000 (32-bit, non-prefetchable) [size=8M]
        Expansion ROM at 80020000 [disabled] [size=64K]
        Capabilities: [40] Power Management version 1
                Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

+++

processor       : 0
vendor_id       : AuthenticAMD
cpu family      : 15
model           : 35
model name      : AMD Athlon(tm)64 X2 Dual Core Processor  3800+
stepping        : 2
cpu MHz         : 2009.205
cache size      : 512 KB
physical id     : 0
siblings        : 2
core id         : 0
cpu cores       : 2
fpu             : yes
fpu_exception   : yes
cpuid level     : 1
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext
fxsr_opt lm 3dnowext 3dnow pni lahf_lm cmp_legacy
bogomips        : 4025.45
TLB size        : 1024 4K pages
clflush size    : 64
cache_alignment : 64
address sizes   : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp

processor       : 1
vendor_id       : AuthenticAMD
cpu family      : 15
model           : 35
model name      : AMD Athlon(tm)64 X2 Dual Core Processor  3800+
stepping        : 2
cpu MHz         : 2009.205
cache size      : 512 KB
physical id     : 0
siblings        : 2
core id         : 1
cpu cores       : 2
fpu             : yes
fpu_exception   : yes
cpuid level     : 1
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext
fxsr_opt lm 3dnowext 3dnow pni lahf_lm cmp_legacy
bogomips        : 4018.56
TLB size        : 1024 4K pages
clflush size    : 64
cache_alignment : 64
address sizes   : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp

+++

           CPU0       CPU1
  0:        117      58601    IO-APIC-edge  timer
  1:          0          8    IO-APIC-edge  i8042
  8:          0          0    IO-APIC-edge  rtc
  9:          0          0   IO-APIC-level  acpi
 16:          3        964   IO-APIC-level  3w-xxxx
 17:          0          1   IO-APIC-level  eth0
 18:         11      22648   IO-APIC-level  eth1
NMI:         57         34
LOC:      58672      58649
ERR:          0
MIS:          0

+++
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to