On Mon, 2006-02-06 at 21:23 +0100, matthieu castet wrote: > Hi, > > Dan Williams wrote: > > I can help out with the mpi350 if you'd like. However, most of the code > > for the MPI350 should be exactly the same as with the PCMCIA version of > > the card. They share just about everything except for the bus type. > > (unless I'm wrong?) > There are some differences for RX and TX code. Search for FLAG_MPI. But > this should'nt be really hard to add them. > I will try to add it this weekend. > > > > > > I think bits of this patch (at least the support for the WPA & RSN > > information elements in scans) should be upstreamed as soon as possible, > I don't know if you know well the code, but the driver can read/write > some data that are indexed with RID. > The main problem is that in order to use WPA, you need to used RID > supported only by newer firmware. > For example for WPA & RSN in scan you need to use a newer RID and a > modified struct for data storage. > But the RID for configuration didn't change with newer firmware but > there are extra elements in the structure.
AFAIK anything less than 5.40.x doesn't work anyway. The latest stuff (5.60.x) has worked fine. I previously had 5.30.17, which tended to hang the card after a while. Anyway, perhaps we require people to update their firmware. Not sure. What's the minimum firmware version for WPA support? Dan - To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
