Folkert van Heusden <[EMAIL PROTECTED]> wrote: > > > > > > > Have you tried enabling the NMI watchdog? Enable > CONFIG_X86_LOCAL_APIC and > > > > > > boot with `nmi_watchdog=1' on the command line, make sure that the > NMI line > > > > > > of /proc/interrupts is incrementing. > > > > > I'll give it a try. I've added it to the append-line in the lilo > config. > > > > > Am now compiling the kernel. > > > > No change. Well, that is: the last message on the console now is > > > > "setting eth1 to promiscues mode". > > > Did you confirm that the NMI counters in /proc/interrupts are > incrementing? > > Yes: > > [EMAIL PROTECTED]:/home/folkert# for i in `seq 1 5` ; do cat > /proc/interrupts | grep NMI ; sleep 1 ; done > > NMI: 6949080 6949067 > > NMI: 6949182 6949169 > > NMI: 6949284 6949271 > > NMI: 6949386 6949373 > > NMI: 6949488 6949475 > > Is there anything else I can try?
argh. I haven't forgotten. Hopefully after -rc1 I'll have more time... Your report didn't mention whether that card work OK under earlier 2.6 kernels. If it does, a bit of bisection searching would really help. - To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
