Just sent this to Andrew and Linus:
Please pull from 'upstream' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git
to receive the following updates:
drivers/net/sk98lin/skproc.c | 265 --
drivers/net/wan/lmc/lmc_prot.h | 15
Documentation/networking/gianfar.txt | 72
drivers/net/8139too.c | 86
drivers/net/Kconfig | 17
drivers/net/Makefile | 7
drivers/net/bonding/Makefile | 2
drivers/net/bonding/bond_3ad.c | 106
drivers/net/bonding/bond_3ad.h | 13
drivers/net/bonding/bond_alb.c | 75
drivers/net/bonding/bond_alb.h | 9
drivers/net/bonding/bond_main.c | 781 +------
drivers/net/bonding/bond_sysfs.c | 1358 ++++++++++++
drivers/net/bonding/bonding.h | 52
drivers/net/chelsio/sge.c | 19
drivers/net/chelsio/sge.h | 2
drivers/net/e1000/e1000.h | 4
drivers/net/e1000/e1000_ethtool.c | 111 -
drivers/net/e1000/e1000_hw.c | 67
drivers/net/e1000/e1000_hw.h | 4
drivers/net/e1000/e1000_main.c | 64
drivers/net/gianfar.c | 233 +-
drivers/net/gianfar.h | 69
drivers/net/gianfar_ethtool.c | 2
drivers/net/gianfar_mii.h | 1
drivers/net/gianfar_sysfs.c | 311 ++
drivers/net/ixp2000/Kconfig | 6
drivers/net/ixp2000/Makefile | 3
drivers/net/ixp2000/caleb.c | 137 +
drivers/net/ixp2000/caleb.h | 22
drivers/net/ixp2000/enp2611.c | 245 ++
drivers/net/ixp2000/ixp2400-msf.c | 213 +
drivers/net/ixp2000/ixp2400-msf.h | 115 +
drivers/net/ixp2000/ixp2400_rx.uc | 408 +++
drivers/net/ixp2000/ixp2400_rx.ucode | 130 +
drivers/net/ixp2000/ixp2400_tx.uc | 272 ++
drivers/net/ixp2000/ixp2400_tx.ucode | 98
drivers/net/ixp2000/ixpdev.c | 421 +++
drivers/net/ixp2000/ixpdev.h | 27
drivers/net/ixp2000/ixpdev_priv.h | 57
drivers/net/ixp2000/pm3386.c | 334 +++
drivers/net/ixp2000/pm3386.h | 28
drivers/net/s2io.c | 200 +
drivers/net/s2io.h | 3
drivers/net/sis900.c | 73
drivers/net/sis900.h | 45
drivers/net/sk98lin/Makefile | 3
drivers/net/sk98lin/h/skdrv2nd.h | 9
drivers/net/sk98lin/h/skvpd.h | 8
drivers/net/sk98lin/skethtool.c | 48
drivers/net/sk98lin/skge.c | 212 -
drivers/net/skge.c | 80
drivers/net/skge.h | 73
drivers/net/sky2.c | 3262 ++++++++++++++++++++++++++++++
drivers/net/sky2.h | 1922 +++++++++++++++++
drivers/net/wireless/Kconfig | 6
drivers/net/wireless/airo.c | 15
drivers/net/wireless/atmel.c | 1490 +++++++------
drivers/net/wireless/hostap/Makefile | 1
drivers/net/wireless/hostap/hostap_main.c | 0
drivers/net/wireless/ipw2100.c | 40
drivers/net/wireless/ipw2100.h | 2
drivers/net/wireless/ipw2200.c | 21
drivers/net/wireless/ipw2200.h | 6
include/linux/netdevice.h | 11
net/core/dev.c | 3
net/core/utils.c | 2
67 files changed, 11405 insertions(+), 2391 deletions(-)
Adrian Bunk:
drivers/net/sk98lin/skge.c: make SkPciWriteCfgDWord() a static inline
hostap: rename hostap.c to hostap_main.c
Ananda Raju:
s2io: UFO support
Andrew Morton:
sky2 needs dma_mapping.h
git-netdev-all: s2io warning fix
Andy Fleming:
Gianfar update and sysfs support
Brice Goglin:
Duplicate IPW_DEBUG option for ipw2100 and 2200
Carlo Perassi:
atmel: CodingStyle cleanup
Christophe Lucas:
atmel: audit return code of create_proc_read_entry
Dan Streetman:
airo.c: add support for IW_ENCODE_TEMP (i.e. xsupplicant)
Daniele Venzano:
Add Wake on LAN support to sis900 (2)
Jeff Garzik:
[netdrvr 8139too] replace hand-crafted kernel thread with workqueue
[netdrvr 8139too] use cancel_rearming_delayed_work() to cancel thread
[netdrvr 8139too] use rtnl_shlock_nowait() rather than
rtnl_lock_interruptible()
[netdrvr 8139too] fast poll for thread, if an unlikely race occurs
[bonding] Remove superfluous changelog.
Jeff Kirsher:
e1000: Fixes for 8357x
Jens Osterkamp:
spidernet: fix Kconfig after BPA->CELL rename
John W. Linville:
skge: fix warning from inlining SkPciWriteCfgDWord()
e1000: avoid leak when e1000_setup_loopback_test fails
e1000: zero-out pointers in e1000_free_desc_rings
Lennert Buytenhek:
intel ixp2000 network driver
ixp2000: register netdevices last
pm3386: zero stats properly
pm3386: remove unnecessary udelays
caleb/pm3386: include proper header files
ixp2000: use netif_rx_schedule_test
enp2611: don't check netif_running() in link status timer
enp2611: use 'dev' in link status timer
enp2611: report link up/down events
ixp2000: report MAC addresses for each port on init
pm3386: add hook for setting MAC address
pm3386: add hook for setting carrier
pm3386: implement reset
enp2611: disable/enable SERDES carrier on interface down/up
ixp2000: add netpoll support
ixp2000: add driver version, bump version to 0.2
Mitch Williams:
net: allow newline terminated IP addresses in in_aton
net: make dev_valid_name public
bonding: add bond name to all error messages
bonding: expand module param descriptions
bonding: Add transmit policy to /proc
bonding: get slave name from actual slave instead of param list
bonding: move kmalloc out of spinlock in ALB init
bonding: explicitly clear RLB flag during ALB init
bonding: expose some structs
bonding: make functions not static
bonding: move bond creation into separate function
bonding: make bond_init not __init
bonding: Allow ARP target table to have empty entries
bonding: add ARP entries to /proc
bonding: add sysfs functionality to bonding (large)
bonding: version update
bonding: spelling and whitespace corrections
bonding: comments and changelog
[EMAIL PROTECTED]:
sky2: changing mtu doesn't have to reset link
sky2: cleanup interrupt processing
sky2: add hardware VLAN acceleration support
sky2: explicit set power state
sky2: version 0.6
sky2: remove unused definitions
sky2: use kzalloc
sky2: spelling fixes
sky2: fix NAPI and receive handling
sky2: version 0.7
sky2: eliminate special case for EC-A1
sky2: add MII support
sky2: fix receive flush/pause issues
sky2: improve receive performance
sky2: add Yukon-EC ultra support
sky2: handle DMA boundary crossing
sky2: change netif_rx_schedule_test to __netif_schedule_prep
sky2: race with MTU change
sky2: dual port tx completion
sky2: byteorder annotation
sky2: remove pci-express hacks
sky2: use pci_register_driver
sky2: update version number
sk98lin: allow ethtool checksum on/off per port
sk98lin: remove redundant fields in device info
sk98lin: remove /proc interface
Stephen Hemminger:
sky2: new experimental Marvell Yukon2 driver
sky2: driver update.
sky2: fix FIFO DMA alignment problems
sky2: allow ethtool debug access to all of PCI space
sky2: version 0.5
sky2: nway reset (BONUS FEATURE)
sky2: add permanent address support.
ixp2000: change netif_schedule_test to __netif_schedule_prep
sky2: interrupt not cleared.
sky2: don't die if we see chip rev 0xb5
sky2: device structure alignment
sky2: copy threshold as module parameter
sky2: ethtool get/set interrupt coalescing
sky2: phy processing in workqueue rather than tasklet
sky2: no irq disable needed during tx
sky2: ring distance optimization
sky2: map length optimization
sky2: tx/rx ring data structure split
sky2: transmit logic fixes
sky2: transmit complete index optimization
sky2: transmit complete routine optimization
sky2: interrupt/poll optimization
sky2: interrupt coalescing tuning
sky2: handle tx timeout
sky2: quiet ring full message in case of race
sky2: prefetch tuning
sky2: turn on tx flow control
sky2: disable rx checksum on Yukon XL
sky2: version 0.10
chelsio: transmit routine return values
skge: avoid up/down on speed changes
skge: avoid up/down on pause param changes
skge: handle out of memory on MTU size changes
skge: get rid of Yukon2 defines
skge: handle out of memory on ring parameter change
skge: version number (1.3)
skge: error handling on resume
sky2: handle out of memory on admin changes
sky2: don't lose multicast addresses
sky2: handle hardware packet overrun
sky2: version 0.11
Takis:
ipw2200: kzalloc conversion and Kconfig dependency fix
Tobias Klauser:
Remove drivers/net/wan/lmc/lmc_prot.h
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
