Hi,
I have a board pulled from a sun box which uses the cassini driver (its
the one with 2 cassini chips and a symbios 896 scsi chip behind an intel
pci bridge, with copper connections, I think its sun part X4422A). I am
using the driver from kernel.org 2.6.14.2.
Kernel messages on startup:
cassini.c:v1.4 (1 July 2004)
eth1: Sun Cassini+ (64bit/33MHz PCI/Cu) Ethernet[9] 00:03:ba:7a:94:b1
eth2: Sun Cassini+ (64bit/33MHz PCI/Cu) Ethernet[5] 00:03:ba:7a:94:b2
attempting to use the card with ipv6 traffic works, but spits out messages:
ICMPv6 hw checksum failed
ICMPv6 hw checksum failed
hw tcp v6 csum failed
hw tcp v6 csum failed
hw tcp v6 csum failed
....
I don't know if it just needs to be told not to calulate the checksums
for v6 packets, or what.
Cheers,
David
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
