Re: [Nant-users] Nunit test on sample build failed with VisualCpp

[Ian MacLean]

Aaron Seet wrote:
Seems like i'm not the only one getting the build failure of 2003 (expected
2004) in 0.84 the first time it's installed :)
After much tracing I found that it checks the copyright notice (as opposed
to the assembly build number + 2000/1/1), so adjusting that to 2004 made it
sweet.
Anyway, that is not my main problem now. The sample build still fails as it
tries to run the "test" target in VisualCpp.build. My build output goes to
D:\development\projects\NAnt/build/net-1.1.win32/nant-0.84-debug
 

You'll be much better off using the 0.85 rc1 release. Both of those 
issues have been fixed and you don't actually need to build nant - you 
can use the binary distribution at:
http://sourceforge.net/project/showfiles.php?group_id=31650

Ian
below is the log saved, showing the prior successful test, plus the first
failed test of eight.
------------------------------------------------------------
                [nant]
D:\development\projects\NAnt\tests\NAnt.Win32\NAnt.Win32.build test
           
                       Buildfile:
file:///D:/development/projects/NAnt/tests/NAnt.Win32/NAnt.Win32.build
                       Target(s) specified: test 
                       
                       build:
                       
                       
                       test:
                       
                          [nunit2] Tests run: 3, Failures: 0, Not run: 0,
Time: 3.1645504 seconds
           
           
           
                       
                       BUILD SUCCEEDED
                       
                       Total time: 3.7 seconds.
           
                [nant]
D:\development\projects\NAnt\tests\NAnt.VisualCpp\NAnt.VisualCpp.build test
           
                       Buildfile:
file:///D:/development/projects/NAnt/tests/NAnt.VisualCpp/NAnt.VisualCpp.bui
ld
                       Target(s) specified: test 
                       
                       build:
                       
                       
                       test:
                       
                          [nunit2] Tests run: 8, Failures: 8, Not run: 0,
Time: 3.00432 seconds
           
           Failures:
           1)
Tests.NAnt.VisualCpp.Tasks.ClTaskTest_HelloWorld.Test_HelloWorldCompile :
Tests.NAnt.Core.TestBuildException : Error Executing Project
             ----> NAnt.Core.BuildException :
C:\DOCUME~1\Aaron\LOCALS~1\Temp\Tests.NAnt.VisualCpp.Tasks.ClTaskTest_HelloW
orld\test.build(3,22):
           [cl] cl failed to start.
             ----> System.ComponentModel.Win32Exception : The system cannot
find the file specified
              at Tests.NAnt.Core.BuildTestBase.ExecuteProject(Project p) in
d:\development\projects\NAnt\tests\NAnt.Core\BuildTestBase.cs:line 149
              at Tests.NAnt.Core.BuildTestBase.RunBuild(String xml, Level
level) in d:\development\projects\NAnt\tests\NAnt.Core\BuildTestBase.cs:line
99
              at Tests.NAnt.Core.BuildTestBase.RunBuild(String xml) in
d:\development\projects\NAnt\tests\NAnt.Core\BuildTestBase.cs:line 72
              at
Tests.NAnt.VisualCpp.Tasks.ClTaskTest_HelloWorld.Test_HelloWorldCompile() in
d:\development\projects\NAnt\tests\NAnt.VisualCpp\Tasks\ClTaskTest.cs:line
64
           --TestBuildException
              at NAnt.Core.Tasks.ExternalProgramBase.StartProcess() in
d:\development\projects\NAnt\src\NAnt.Core\Tasks\ExternalProgramBase.cs:line
354
              at NAnt.Core.Tasks.ExternalProgramBase.ExecuteTask() in
d:\development\projects\NAnt\src\NAnt.Core\Tasks\ExternalProgramBase.cs:line
242
              at NAnt.VisualCpp.Tasks.ClTask.ExecuteTask() in
d:\development\projects\NAnt\src\NAnt.VisualCpp\Tasks\ClTask.cs:line 320
              at NAnt.Core.Task.Execute() in
d:\development\projects\NAnt\src\NAnt.Core\Task.cs:line 151
              at NAnt.Core.Project.InitializeProjectDocument(XmlDocument
doc) in d:\development\projects\NAnt\src\NAnt.Core\Project.cs:line 1192
              at NAnt.Core.Project.Execute() in
d:\development\projects\NAnt\src\NAnt.Core\Project.cs:line 725
              at Tests.NAnt.Core.BuildTestBase.ExecuteProject(Project p) in
d:\development\projects\NAnt\tests\NAnt.Core\BuildTestBase.cs:line 146
           --BuildException
              at
System.Diagnostics.Process.StartWithCreateProcess(ProcessStartInfo
startInfo)
              at System.Diagnostics.Process.Start()
              at NAnt.Core.Tasks.ExternalProgramBase.StartProcess() in
d:\development\projects\NAnt\src\NAnt.Core\Tasks\ExternalProgramBase.cs:line
349
------------------------------------------------------------ 

All eight tests in VisualCpp fails due to the same error. I figure it cannot
find any file because it is somehow accessing my user temp dir
"C:\DOCUME~1\Aaron\LOCALS~1\Temp\"
Up to now i am still trying to determine _how_ it ends up using that
directory structure instead of the one setup in my D:\; the code doesn't
feature any hard coded directories, and the build XML content is normal like
the other tests' build content.
Any idea what else should be configured on my part so the test properly
accesses the correct path?
thanks,
Aaron

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now. 
http://productguide.itmanagersjournal.com/
_______________________________________________
Nant-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/nant-users
 


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now. 
http://productguide.itmanagersjournal.com/
_______________________________________________
Nant-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/nant-users