Hi all,
I'm having a hard time getting vpnc (0.5.3) from packages to work on 4.8.
I have it running on Mac OS X (and Linux also), but it just doesn't work(tm)
on OpenBSD.
Everything get's set up properly (in my eyes). The tun device is created, the
IP Address is assigned, the routes are set. But it looks like vpnc just
doesn't forward anything.
net.inet.esp.enable and net.inet.ah.enable are set to 0, as mentioned by the
vpnc installation script.
# ping sipgate.de
PING sipgate.de (217.10.79.9): 56 data bytes
ping: sendto: No buffer space available
ping: wrote sipgate.de 64 chars, ret=-1
Has anyone got this working on a recent OpenBSD?
IPSec gateway secureconnect.sipgate.net
IPSec ID secureconnect.sipgate.net
IPSec secret sipgate-key
#IPSec target network 217.10.64.0/255.255.240.0
IKE Authmode psk
Xauth username user
Xauth password pass
#NAT Traversal Mode force-natt
Script /etc/vpnc/vpnc-sipgate-script
(Custom script is the default one, minus the resolv.conf handling and sets
217.10.64.0/255.255.240.0 instead of default route)
tun0: flags=51<UP,POINTOPOINT,RUNNING> mtu 1412
priority: 0
groups: tun
status: active
inet 212.9.32.144 --> 212.9.32.144 netmask 0xffffffff
# netstat -nrf inet
Routing tables
Internet:
Destination Gateway Flags Refs Use Mtu Prio Iface
default 10.1.16.1 UGS 4 32 - 8 em0
10.1.16/24 link#1 UC 2 0 - 4 em0
10.1.16.1 00:50:8b:95:a4:d2 UHLc 1 5 - 4 em0
10.1.16.128 00:23:df:a7:8d:9e UHLc 1 154 - 4 em0
10.1.16.222 127.0.0.1 UGHS 0 0 33160 8 lo0
127/8 127.0.0.1 UGRS 0 0 33160 8 lo0
127.0.0.1 127.0.0.1 UH 2 0 33160 4 lo0
212.9.32.151 212.9.32.151 UH 1 0 - 4 tun0
217.10.64/20 212.9.32.151 UGS 0 0 - 8 tun0
224/4 127.0.0.1 URS 0 0 33160 8 lo0
