mspdebug uses libusb, which means it uses ugen(4). ls -l /dev/ugen*
On Wed, Dec 08, 2010 at 09:59:58AM +0100, Benjamin Nadland wrote: > I just got my TI MSP430 Launchpad and saw that msp430-gcc and > mspdebug got imported into ports. > >From the commit message: "One will need an upcoming umodem.c commit by > >jakemsr@, > and an upcoming mspdebug port in order to actually program the devices > though." > Is this the mentioned umodem.c commit: > http://marc.info/?l=openbsd-cvs&m=129125391912134&w=2 ? > > Compiling works(?) as expected. But when I try to upload the binary to > the chip, I get the following errors: > > $ mspdebug rf2500 > MSPDebug version 0.13 - debugging tool for MSP430 MCUs > Copyright (C) 2009, 2010 Daniel Beer <[email protected]> > This is free software; see the source for copying conditions. There is NO > warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. > usbutil: unable to find a device matching 0451:f432 > > $ mspdebug rf2500 -U 0451:f432 > MSPDebug version 0.13 - debugging tool for MSP430 MCUs > Copyright (C) 2009, 2010 Daniel Beer <[email protected]> > This is free software; see the source for copying conditions. There is NO > warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. > usbutil: unable to find 451:000 > > (might be unrelated, but why did it search for 451:000 ?) > > $ mspdebug rf2500 --usb-list > Devices on bus 000: > Devices on bus 000: > Devices on bus 000: > Devices on bus 000: > Devices on bus 000: > > So it doesn't find it, but it is plugged in and recognized: > > $ usbdevs -v > Controller /dev/usb0: > addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > port 1 powered > port 2 powered > port 3 powered > port 4 powered > port 5 powered > port 6 powered > port 7 addr 3: high speed, power 100 mA, unconfigured, RTL8187B(0x8198), > Realtek(0x0bda), rev 2.00, iSerialNumber 00e04c000001 > port 8 powered > Controller /dev/usb1: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > port 1 powered > port 2 powered > Controller /dev/usb2: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > port 1 addr 2: full speed, power 100 mA, config 1, Texas Instruments > MSP-FET430UIF(0xf432), Texas Instruments(0x0451), rev 1.00, iSerialNumber > A7FF41CE96103E46 > port 2 powered > Controller /dev/usb3: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > port 1 powered > port 2 powered > Controller /dev/usb4: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > port 1 powered > port 2 powered > > In my dmesg it shows that the launchpad attaches as uhidev(4), does this mean > that the kernel is to old and does not contain the usb_quirks.c commit from > dec 1 to prevent this? (http://marc.info/?l=openbsd-cvs&m=129127220327339&w=2) > (Just finished upgrading to this version a few hours ago, > currently downloading another, newer snapshot. Might take some time though.) > > $ dmesg > OpenBSD 4.8-current (GENERIC) #510: Sat Dec 4 12:03:30 MST 2010 > [email protected]:/usr/src/sys/arch/i386/compile/GENERIC > cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE > real mem = 1060163584 (1011MB) > avail mem = 1032769536 (984MB) > mainbus0 at root > bios0 at mainbus0: AT/286+ BIOS, date 05/09/08, SMBIOS rev. 2.4 @ 0xe8e70 (32 > entries) > bios0: vendor Acer version "v0.3114" date 05/09/2008 > bios0: Acer AOA150 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP SSDT HPET APIC MCFG ASF! SLIC BOOT > acpi0: wakeup devices P32_(S4) UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) ECHI(S3) > EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) AZAL(S0) MODM(S0) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpihpet0 at acpi0: 14318179 Hz > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: apic clock running at 133MHz > cpu at mainbus0: not configured > ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins > ioapic0: misconfigured as apic 0, remapped to apid 4 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 4 (P32_) > acpiprt2 at acpi0: bus 1 (EXP1) > acpiprt3 at acpi0: bus 2 (EXP2) > acpiprt4 at acpi0: bus -1 (EXP3) > acpiprt5 at acpi0: bus 3 (EXP4) > acpiec0 at acpi0 > acpicpu0 at acpi0: C3, C2, C1, PSS > acpibtn0 at acpi0: PWRB > acpibtn1 at acpi0: LID0 > acpibtn2 at acpi0: SLPB > acpibat0 at acpi0: BAT1 not present > acpiac0 at acpi0: AC unit online > acpivideo0 at acpi0: OVGA > acpivout0 at acpivideo0: CRT1 > acpivout1 at acpivideo0: DTV1 > acpivout2 at acpivideo0: DFP1 > acpivout3 at acpivideo0: LCD_ > acpivout4 at acpivideo0: DTV2 > acpivout5 at acpivideo0: DFP2 > bios0: ROM list: 0xc0000/0xec00! 0xcf000/0x1000 > cpu0: Enhanced SpeedStep 1597 MHz: speeds: 1600, 1333, 1066, 800 MHz > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03 > vga1 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > intagp0 at vga1 > agp0 at intagp0: aperture at 0x40000000, size 0x10000000 > inteldrm0 at vga1: apic 4 int 16 (irq 11) > drm0 at inteldrm0 > "Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured > azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: apic 4 > int 16 (irq 11) > azalia0: codecs: Realtek ALC268 > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 4 int 16 > (irq 255) > pci1 at ppb0 bus 1 > ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 4 int 17 > (irq 255) > pci2 at ppb1 bus 2 > re0 at pci2 dev 0 function 0 "Realtek 8101E" rev 0x02: RTL8102EL (0x2480), > apic 4 int 17 (irq 11), address 00:1e:68:ab:b0:0b > rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1 > ppb2 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 4 int 19 > (irq 255) > pci3 at ppb2 bus 3 > "JMicron SD/MMC" rev 0x00 at pci3 dev 0 function 0 not configured > sdhc0 at pci3 dev 0 function 2 "JMicron SD Host Controller" rev 0x00: apic 4 > int 19 (irq 11) > sdmmc0 at sdhc0 > "JMicron Memory Stick" rev 0x00 at pci3 dev 0 function 3 not configured > "JMicron xD" rev 0x00 at pci3 dev 0 function 4 not configured > uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 4 int 16 > (irq 11) > uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 4 int 17 > (irq 11) > uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 4 int 18 > (irq 11) > uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 4 int 19 > (irq 11) > ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 4 int 16 > (irq 11) > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2 > pci4 at ppb3 bus 4 > ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled > pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA, > channel 0 wired to compatibility, channel 1 wired to compatibility > wd0 at pciide0 channel 0 drive 0: <ST9120817AS> > wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6 > ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 4 int > 17 (irq 11) > iic0 at ichiic0 > spdmem0 at iic0 addr 0x51: 512MB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM > usb1 at uhci0: USB revision 1.0 > uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb2 at uhci1: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci2: USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb4 at uhci3: USB revision 1.0 > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at ichpcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > pckbc0: using irq 12 for aux slot > wsmouse0 at pms0 mux 0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > mtrr: Pentium Pro MTRR support > uvideo0 at uhub0 port 5 configuration 1 interface 0 "Sonix Technology Co., > Ltd. USB 2.0 Camera" rev 2.00/1.00 addr 2 > video0 at uvideo0 > urtw0 at uhub0 port 7 "Realtek RTL8187B" rev 2.00/2.00 addr 3 > urtw0: RTL8187B rev E, address 00:24:d2:2f:6d:1d > vscsi0 at root > scsibus0 at vscsi0: 256 targets > softraid0 at root > root on wd0a swap on wd0b dump on wd0b > scsibus1 at softraid0: 1 targets > sd0 at scsibus1 targ 0 lun 0: <OPENBSD, SR CRYPTO, 004> SCSI2 0/direct fixed > sd0: 86811MB, 512 bytes/sec, 177790828 sec total > umodem0 at uhub1 port 1 configuration 1 interface 0 "Texas Instruments Texas > Instruments MSP-FET430UIF" rev 1.10/1.00 addr 2 > umodem0: no pointer to data interface > uhidev0 at uhub1 port 1 configuration 1 interface 1 "Texas Instruments Texas > Instruments MSP-FET430UIF" rev 1.10/1.00 addr 2 > uhidev0: iclass 3/0, 211 report ids > uhid0 at uhidev0 reportid 1: input=1, output=1, feature=0 > uhid1 at uhidev0 reportid 2: input=2, output=2, feature=0 > uhid2 at uhidev0 reportid 3: input=3, output=3, feature=0 > uhid3 at uhidev0 reportid 4: input=4, output=4, feature=0 > uhid4 at uhidev0 reportid 5: input=5, output=5, feature=0 > uhid5 at uhidev0 reportid 6: input=6, output=6, feature=0 > uhid6 at uhidev0 reportid 7: input=7, output=7, feature=0 > uhid7 at uhidev0 reportid 8: input=8, output=8, feature=0 > uhid8 at uhidev0 reportid 9: input=9, output=9, feature=0 > uhid9 at uhidev0 reportid 10: input=10, output=10, feature=0 > uhid10 at uhidev0 reportid 11: input=11, output=11, feature=0 > uhid11 at uhidev0 reportid 12: input=12, output=12, feature=0 > uhid12 at uhidev0 reportid 13: input=13, output=13, feature=0 > uhid13 at uhidev0 reportid 14: input=14, output=14, feature=0 > uhid14 at uhidev0 reportid 15: input=15, output=15, feature=0 > uhid15 at uhidev0 reportid 16: input=16, output=16, feature=0 > uhid16 at uhidev0 reportid 17: input=17, output=17, feature=0 > uhid17 at uhidev0 reportid 18: input=18, output=18, feature=0 > uhid18 at uhidev0 reportid 32: input=32, output=32, feature=0 > uhid19 at uhidev0 reportid 63: input=63, output=63, feature=0 > uhid20 at uhidev0 reportid 200: input=0, output=0, feature=1 > uhid21 at uhidev0 reportid 201: input=0, output=0, feature=2 > uhid22 at uhidev0 reportid 202: input=0, output=0, feature=2 > uhid23 at uhidev0 reportid 203: input=0, output=0, feature=1 > uhid24 at uhidev0 reportid 204: input=0, output=0, feature=1 > uhid25 at uhidev0 reportid 205: input=0, output=0, feature=1 > uhid26 at uhidev0 reportid 210: input=0, output=0, feature=1 > uhid27 at uhidev0 reportid 211: input=0, output=0, feature=1 > > $ pkg_info | grep msp > msp430-binutils-2.20 GNU binutils for msp430 > msp430-gcc-4.4.4 GNU Compiler Collection for msp430 > msp430-gdb-7.1 GNU debugger for msp430 > msp430-libc-20101113 GNU libc for msp430 > mspdebug-0.13 debugger for use with MSP 430 MCUs -- [email protected] SDF Public Access UNIX System - http://sdf.lonestar.org
