I've had no problem with the HP DL360 G3s
I have both
OpenBSD 4.7-current (GENERIC.MP) #560: Wed Apr 28 11:55:01 MDT 2010
and
OpenBSD 4.8 (GENERIC.MP) #359: Mon Aug 16 09:16:26 MDT 2010
running on DL360 G3s. In a very similar setup as you are describing.
Have you installed any special hardware? I would also check the Array
Controller utility ( F8 during boot). The problem is likely there.
Please attach your dmesg if possible.
-Christopher Ahrens
On 23-Nov-10 03:48, Jiri B. wrote:
Plug serial cable and get some info.
----------------------------------------
Date: Tue, 23 Nov 2010 12:33:41 +0100
From: [email protected]
To: [email protected]
Subject: 4.8 fail boot
Hello,
after boot on my DL360 G3 2Gb ram, hp array i5 (2x36gb mirroring)
with new 4.8 the boot blocked on:
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
rd0: fixed, 3800 block
softraid0 at root
end .....
NO error, no other info...
4.6 boot regulary...
