it is not a hang.
Just disabled output to serial console.
You should add lines:
set tty com0
stty com0 57600
to /etc/boot.conf
On 07:31 Thu 18 Nov , Frank Bax wrote:
> I installed 4.7 to a CF card via usb connector on HP D530. I then
> inserted CF card into a new ALIX system with serial console.
>
> Boot process hangs with both bsd.sp and bsd.rd (see below).
>
> What is my next step in determining the problem here?
>
>
> PC Engines ALIX.2 v0.99h
> 640 KB Base Memory
> 261120 KB Extended Memory
>
> 01F0 Master 044A ULTIMATE CF CARD 16GB
> Phys C/H/S 16383/16/63 Log C/H/S 1856/255/63 LBA
> Using drive 0, partition 3.
> Loading...
> probing: pc0 com0 com1 pci mem[640K 255M a20=on]
> disk: hd0+
> >> >> OpenBSD/i386 BOOT 3.02
> boot> boot bsd.rd
> booting hd0a:bsd.rd: 5864788+916112 [52+221040+208132]=0x6e0600
> entry point at 0x200120
>
--
sergeyb@
