On Wed 27/10/10 13:56, "David Coppa" [email protected] wrote: > On Wed, 27 Oct 2010, Mayuresh Kathe wrote: > > > would like to know if my modem is supported under > 4.7, if not, what about 4.8, > if > > not what assistance can i provide the person/people > who have the capability > to > > add in support? > > if supported, can someone please provide me the > chat-script? > i have tacked in the dmesg (while the modem was > plugged in) below. > > umsm0 at uhub0 port 5 configuration 1 interface 0 > "HUAWEI Technology HUAWEI > Mobile" rev 2.00/0.00 addr 2 > > umsm0: umass only mode. need to reattach > > umsm0 detached > > umsm0 at uhub0 port 5 configuration 1 interface 0 > "HUAWEI Technology HUAWEI > Mobile" rev 2.00/0.00 addr 2 > > ucom0 at umsm0 > > umsm1 at uhub0 port 5 configuration 1 interface 1 > "HUAWEI Technology HUAWEI > Mobile" rev 2.00/0.00 addr 2 > > ucom1 at umsm1 > > umsm2 at uhub0 port 5 configuration 1 interface 2 > "HUAWEI Technology HUAWEI > Mobile" rev 2.00/0.00 addr 2 > > ucom2 at umsm2 > > umsm3 at uhub0 port 5 configuration 1 interface 3 > "HUAWEI Technology HUAWEI > Mobile" rev 2.00/0.00 addr 2 > > umsm4 at uhub0 port 5 configuration 1 interface 4 > "HUAWEI Technology HUAWEI > Mobile" rev 2.00/0.00 addr 2 > > Your modem is already supported. > > You just need to find what is the port that accepts AT commands and > create two scripts under /etc/ppp/peers. > > use cu(1) to test the port: > > # cu -l cuaU0 > Connected > AT > OK > > Then you can start the connection using the following commands: > > # ifconfig ppp0 create && pppd file /etc/ppp/peers/vodafone > > These are the scripts I use with Vodafone Italia, e.g.: > > $ cat /etc/ppp/peers/vodafone > /dev/cuaU0 > debug > crtscts > 921600 > defaultroute > noauth > :10.64.64.64 > connect '/usr/sbin/chat -v -f /etc/ppp/peers/vodafone.chat' > > $ cat /etc/ppp/peers/vodafone.chat > ABORT "NO CARRIER" > ABORT "NO DIALTONE" > ABORT "ERROR" > ABORT "NO ANSWER" > ABORT "BUSY" > ABORT "Username/Password Incorrect" > TIMEOUT 15 > "" "ATZ" > OK "ATE1" > OK "ATQ0V1E1S0=0&C1&D2+FCLASS=0" > OK 'AT+CGDCONT=1,"IP","web.omnitel.it"' > OK "ATDT*99***1#" > TIMEOUT 30 > CONNECT \d\c > > CCing also the other guy who was asking a similar question... > > Cheers, > David
Hello David, I've tried almost everything I could but still couldn't get the connection to work, I even spoke with the Vodafone guys but their junior level people are all about Windows and Mac OS X. Is there any other way to get this connection working? Could you tell me what are the names of the variables in your chat scripts such that I can get my requests forwarded to the senior level people at Vodafone (technical support)? I would like to know what the following (in your scripts) are called; 1. "web.omnitel.it" 2. "ATDT*99***1#" 3. :10.64.64.64 >From where I look at the scripts, these are the variables which should be changeable from place to place :-) Best.
