That is a bad drive. You should replace it asap. On Oct 25, 2010, at 12:52, Rodolfo Gouveia <[email protected]> wrote:
> Hi all! > > I'm having these errors with mpii0: > > mpii0: xfer timeout, ccb 4 state 2 > mpii0: xfer timeout, ccb 5 state 2 > mpii0: xfer timeout, ccb 43 state 2 > mpii0: xfer timeout, ccb 51 state 2 > mpii0: xfer timeout, ccb 24 state 2 > ... > mpii0: xfer timeout, ccb 104 state 2 > > And also: > > /bsd: sd0(mpii0:1:0): Check Condition (error 0x70) on opcode 0x28 > /bsd: SENSE KEY: Media Error > /bsd: INFO: 0xc664e20 (VALID flag on) > /bsd: ASC/ASCQ: Unrecovered Read Error > /bsd: sd0(mpii0:1:0): Check Condition (error 0x70) on opcode 0x28 > > > This is on a Dell PowerEdge R410 with two disks as RAID 1 on mpii(4). > The machine normally just lockups under some IO load due to a PostgreSQL server. > As this is on the datacenter I would like to know if this could be triggered > by something else than hardware before going there locally. > This is on 4.7 -release AMD64. > > Any feedback is appreciated, > --rodolfo > > OpenBSD 4.7 (GENERIC.MP) #130: Wed Mar 17 20:48:50 MDT 2010 > [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 3478622208 (3317MB) > avail mem = 3379052544 (3222MB) > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xcf79c000 (77 entries) > bios0: vendor Dell Inc. version "1.3.9" date 04/07/2010 > bios0: Dell Inc. PowerEdge R410 > acpi0 at bios0: rev 2 > acpi0: tables DSDT FACP APIC SPCR HPET DM__ MCFG WDAT SLIC ERST HEST BERT EINJ SRAT TCPA SSDT > acpi0: wakeup devices PCI0(S5) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 16 (boot processor) > cpu0: Intel(R) Xeon(R) CPU E5502 @ 1.87GHz, 1862.26 MHz > cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16, xTPR,NXE,LONG > cpu0: 256KB 64b/line 8-way L2 cache > cpu0: apic clock running at 132MHz > cpu1 at mainbus0: apid 20 (application processor) > cpu1: Intel(R) Xeon(R) CPU E5502 @ 1.87GHz, 1862.00 MHz > cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16, xTPR,NXE,LONG > cpu1: 256KB 64b/line 8-way L2 cache > ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins > ioapic1 at mainbus0: apid 1 pa 0xfec80000, version 20, 24 pins > ioapic1: misconfigured as apic 0, remapped to apid 1 > acpihpet0 at acpi0: 14318179 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (PEX1) > acpiprt2 at acpi0: bus 2 (PEX3) > acpiprt3 at acpi0: bus 3 (PEX7) > acpiprt4 at acpi0: bus -1 (PEX9) > acpiprt5 at acpi0: bus -1 (PEXA) > acpiprt6 at acpi0: bus -1 (SBEX) > acpiprt7 at acpi0: bus 4 (COMP) > acpicpu0 at acpi0: C3, C1 > acpicpu1 at acpi0: C3, C1 > ipmi at mainbus0 not configured > cpu0: unknown i686 model 0x1a, can't get bus clock > cpu0: EST: PSS not yet available for this processor > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel 5500 Host" rev 0x13 > ppb0 at pci0 dev 1 function 0 "Intel X58 PCIE" rev 0x13 > pci1 at ppb0 bus 1 > bnx0 at pci1 dev 0 function 0 "Broadcom BCM5716" rev 0x20: apic 1 int 4 (irq 15) > bnx1 at pci1 dev 0 function 1 "Broadcom BCM5716" rev 0x20: apic 1 int 16 (irq 14) > ppb1 at pci0 dev 3 function 0 "Intel X58 PCIE" rev 0x13 > pci2 at ppb1 bus 2 > ppb2 at pci0 dev 7 function 0 "Intel X58 PCIE" rev 0x13: apic 1 int 21 (irq 0) > pci3 at ppb2 bus 3 > mpii0 at pci3 dev 0 function 0 "Symbios Logic SAS2008" rev 0x02: apic 1 int 6 (irq 15) > scsibus0 at mpii0: 42 targets > sd0 at scsibus0 targ 1 lun 0: <Dell, Virtual Disk, 1028> SCSI4 0/direct fixed > sd0: 237824MB, 512 bytes/sec, 487063552 sec total > mpii0: unable to create sensors > "Intel X58 Misc" rev 0x13 at pci0 dev 20 function 0 not configured > "Intel X58 GPIO" rev 0x13 at pci0 dev 20 function 1 not configured > "Intel X58 RAS" rev 0x13 at pci0 dev 20 function 2 not configured > uhci0 at pci0 dev 26 function 0 "Intel 82801JI USB" rev 0x00: apic 0 int 17 (irq 14) > uhci1 at pci0 dev 26 function 1 "Intel 82801JI USB" rev 0x00: apic 0 int 18 (irq 11) > ehci0 at pci0 dev 26 function 7 "Intel 82801JI USB" rev 0x00: apic 0 int 19 (irq 10) > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > uhci2 at pci0 dev 29 function 0 "Intel 82801JI USB" rev 0x00: apic 0 int 21 (irq 6) > uhci3 at pci0 dev 29 function 1 "Intel 82801JI USB" rev 0x00: apic 0 int 20 (irq 5) > uhci4 at pci0 dev 29 function 2 "Intel 82801JI USB" rev 0x00: apic 0 int 21 (irq 6) > uhci5 at pci0 dev 29 function 3 "Intel 82801JI USB" rev 0x00: apic 0 int 20 (irq 5) > ehci1 at pci0 dev 29 function 7 "Intel 82801JI USB" rev 0x00: apic 0 int 21 (irq 6) > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x90 > pci4 at ppb3 bus 4 > vga1 at pci4 dev 3 function 0 "Matrox MGA G200eW" rev 0x0a > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > pcib0 at pci0 dev 31 function 0 "Intel 82801JIR LPC" rev 0x00 > pciide0 at pci0 dev 31 function 2 "Intel 82801JI SATA" rev 0x00: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI > pciide0: using apic 0 int 23 (irq 14) for native-PCI interrupt > pciide1 at pci0 dev 31 function 5 "Intel 82801JI SATA" rev 0x00: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI > pciide1: using apic 0 int 22 (irq 11) for native-PCI interrupt > atapiscsi0 at pciide1 channel 0 drive 0 > scsibus1 at atapiscsi0: 2 targets > cd0 at scsibus1 targ 0 lun 0: <TEAC, DVD-ROM DV-28SW, R.2A> ATAPI 5/cdrom removable > cd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 > usb2 at uhci0: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci1: USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb4 at uhci2: USB revision 1.0 > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb5 at uhci3: USB revision 1.0 > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb6 at uhci4: USB revision 1.0 > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb7 at uhci5: USB revision 1.0 > uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pcppi0 at isa0 port 0x61 > midi0 at pcppi0: <PC speaker> > spkr0 at pcppi0 > mtrr: Pentium Pro MTRR support > uhub8 at uhub0 port 3 "Standard Microsystems product 0x2514" rev 2.00/0.00 addr 2 > uhidev0 at uhub4 port 1 configuration 1 interface 0 "NOVATEK USB Keyboard" rev 1.10/1.12 addr 2 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 modifier keys, 6 key codes > wskbd0 at ukbd0: console keyboard, using wsdisplay0 > uhidev1 at uhub4 port 1 configuration 1 interface 1 "NOVATEK USB Keyboard" rev 1.10/1.12 addr 2 > uhidev1: iclass 3/0, 4 report ids > uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0 > uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0 > uhid2 at uhidev1 reportid 4: input=2, output=0, feature=0 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > root on sd0a swap on sd0b dump on sd0b > WARNING: / was not properly unmounted > bnx0: address a4:ba:db:45:03:9e > brgphy0 at bnx0 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8 > bnx1: address a4:ba:db:45:03:9f > brgphy1 at bnx1 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
