On Fri, Sep 03, 2010 at 11:26:01PM -0700, Aaron Stellman wrote: > Hello, > > Having some issues with azalia(4) in a thinkpad T61, and perhaps aucat > may have something to do with it too. > Very simple setup, listening to mpd playing audio streams from another > mpd running on another machine. Sound skips at times, coinciding with > the following messages in dmesg:
when did this start? > azalia0: stream 1: sts=28<FIFOE,FIFORDY> > azalia0: stream 1: sts=28<FIFOE,FIFORDY> > azalia0: stream 1: sts=28<FIFOE,FIFORDY> > azalia0: stream 1: sts=28<FIFOE,FIFORDY> > azalia0: stream 1: sts=28<FIFOE,FIFORDY> > azalia0: stream 1: sts=2c<BCIS,FIFOE,FIFORDY> > azalia0: stream 1: sts=28<FIFOE,FIFORDY> > azalia0: stream 1: sts=28<FIFOE,FIFORDY> > azalia0: stream 1: sts=28<FIFOE,FIFORDY> > azalia0: stream 1: sts=28<FIFOE,FIFORDY> > azalia0: stream 1: sts=28<FIFOE,FIFORDY> > azalia0: stream 1: sts=28<FIFOE,FIFORDY> > azalia0: stream 1: sts=2c<BCIS,FIFOE,FIFORDY> > azalia0: stream 1: sts=28<FIFOE,FIFORDY> > azalia0: stream 1: sts=28<FIFOE,FIFORDY> > azalia0: stream 1: sts=28<FIFOE,FIFORDY> > .... > $ dmesg | grep azalia | wc -l > 582 > > Sometimes aucat just exits by itself, sometimes doesn't. > $ sudo aucat -dddd > sio(default|): created > default: recording s16le,0:1,44100 > default: playing s16le,0:1,44100 > mix(play): newin, will use 11648 > default: block size is 2912 frames, using 4 blocks > defa...@default: rec=0:1 play=0:1 vol=32768 > listen(/tmp/aucat/softaudio0|): created > sock(sock|): created > sock/hel|rmsg|widl: HELLO message > sock/hel|rmsg|widl: hello from <mpd>, proto = 1, ver 3 > default: option found > device requested > ctl(ctl): new control name is mpd0 > ctl(ctl): overwritten slot 0 > sock/hel|rmsg|widl: no read buffer to set volume yet > mpd0(127)/off: changing volume to 127 > mpd0/ini|rmsg|widl: SETPAR message > mpd0/ini|rmsg|widl: using 16bits, 2 bytes per sample > mpd0/ini|rmsg|widl: using playback channels 0..1 > mpd0/ini|rmsg|widl: using 44100Hz sample rate, 2912 fr block size > mpd0/ini|rmsg|widl: using 11648 buffer size > mpd0: buffer size = 11648, play = s16le,0:1,44100 > mpd0/ini|rmsg|widl: GETPAR message > mpd0/ini|rret|widl: RRET done > mpd0/ini|rmsg|widl: GETPAR message > mpd0/ini|rret|widl: RRET done > mpd0/ini|rmsg|widl: GETPAR message > mpd0/ini|rret|widl: RRET done > mpd0/ini|rmsg|widl: START message > mpd0/sta|rmsg|widl: allocating 11648/23296 fr buffers, rmax = 93184 > mpd0/run|rmsg|widl: attaching at 0 > rsock(sock)->mix(play): setmaster: 32768/32768 > syncing device, mix(play): todo = 0: lat = 0, sub(rec): lat = 0 > rsock(sock)->mix(play): setting volume to 32768 > starting device > sio(default|): started > sio(default|): busy loop, disconnecting > sio(default|): disconnected > sio(default|eh): eof > rsio(default): eof > rsio(default): terminating... > rsio(default): done > rsio(default)->sub(rec): eof requested > sub(rec): terminating... > sub(rec): free delayed > wsio(default): terminating... > wsio(default): done > mix(play)->wsio(default): hup requested > mix(play): hup > mix(play): terminating... > rsock(sock)->mix(play): hup requested > rsock(sock): hup > rsock(sock): terminating... > rsock(sock): done > mpd0/ini|rmsg|widl: freeing buffers > wsock(sock): terminating... > wsock(sock): done > wsock(sock): freed > sock(sock|w): terminating... > sock(sock|w): destroyed > device released > rsock(sock): freed > mix(play): free delayed > sio(default|Reh): terminating... > wsio(default): free delayed > rsio(default): free delayed > sio(default|hZ): terminating... > sio(default|hZ): destroyed > sio(default|hZ): stopped > device disappeared > closing device > ctl(ctl): terminating... > ctl(ctl): done > ctl(ctl): free delayed > zomb(play): freed > zomb(default): freed > zomb(rec): freed > zomb(default): freed > zomb(ctl): freed > listen(/tmp/aucat/softaudio0|): closing > listen(/tmp/aucat/softaudio0|Z): terminating... > listen(/tmp/aucat/softaudio0|Z): destroyed > nothing to do... > > These events tend to happen when I switch virtual screens in scrotwm.. > Haven't tried on other WMs. > > Usually I run it like this: > $ grep aucat /etc/rc.conf.local > aucat_flags="-l" # for normal use: "" > > > OpenBSD 4.8-beta (GENERIC.MP) #297: Thu Aug 5 21:35:12 MDT 2010 > [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 2103115776 (2005MB) > avail mem = 2033311744 (1939MB) > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0010 (73 entries) > bios0: vendor LENOVO version "7LETC7WW (2.27 )" date 04/08/2010 > bios0: LENOVO 7658CTO > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG HPET SLIC BOOT ASF! SSDT > SSDT SSDT SSDT > acpi0: wakeup devices LID_(S3) SLPB(S3) LURT(S3) DURT(S3) IGBE(S4) EXP0(S4) > EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) PCI1(S4) USB0(S3) USB1(S3) USB2(S3) > USB3(S3) USB4(S3) EHC0(S3) EHC1(S3) HDEF(S4) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpiec0 at acpi0 > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz, 2394.40 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG > cpu0: 3MB 64b/line 8-way L2 cache > cpu0: apic clock running at 199MHz > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz, 2394.00 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG > cpu1: 3MB 64b/line 8-way L2 cache > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins > ioapic0: misconfigured as apic 2, remapped to apid 1 > acpihpet0 at acpi0: 14318179 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus -1 (AGP_) > acpiprt2 at acpi0: bus 2 (EXP0) > acpiprt3 at acpi0: bus 3 (EXP1) > acpiprt4 at acpi0: bus 4 (EXP2) > acpiprt5 at acpi0: bus 5 (EXP3) > acpiprt6 at acpi0: bus 13 (EXP4) > acpiprt7 at acpi0: bus 21 (PCI1) > acpicpu0 at acpi0: C3, C2, C1, PSS > acpicpu1 at acpi0: C3, C2, C1, PSS > acpipwrres0 at acpi0: PUBS > acpitz0 at acpi0: critical temperature 127 degC > acpitz1 at acpi0: critical temperature 100 degC > acpibtn0 at acpi0: LID_ > acpibtn1 at acpi0: SLPB > acpibat0 at acpi0: BAT0 model "42T4530" serial 483 type LION oem "SANYO" > acpibat1 at acpi0: BAT1 not present > acpiac0 at acpi0: AC unit online > acpithinkpad0 at acpi0 > acpidock0 at acpi0: GDCK not docked (0) > cpu0: Enhanced SpeedStep 2394 MHz: speeds: 2401, 2400, 2000, 1600, 1200, 800 > MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x0c > vga1 at pci0 dev 2 function 0 "Intel GM965 Video" rev 0x0c > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > intagp0 at vga1 > agp0 at intagp0: aperture at 0xe0000000, size 0x10000000 > inteldrm0 at vga1: apic 1 int 16 (irq 10) > drm0 at inteldrm0 > "Intel GM965 Video" rev 0x0c at pci0 dev 2 function 1 not configured > em0 at pci0 dev 25 function 0 "Intel ICH8 IGP M AMT" rev 0x03: apic 1 int 20 > (irq 11), address 00:1c:25:76:fa:ea > uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x03: apic 1 int 20 > (irq 11) > uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x03: apic 1 int 21 > (irq 11) > ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x03: apic 1 int 22 > (irq 11) > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x03: apic 1 > int 17 (irq 11) > azalia0: codecs: Analog Devices AD1984, Conexant/0x2bfa, using Analog Devices > AD1984 > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x03: apic 1 int 20 > (irq 11) > pci1 at ppb0 bus 2 > ppb1 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x03: apic 1 int 21 > (irq 11) > pci2 at ppb1 bus 3 > iwn0 at pci2 dev 0 function 0 "Intel Wireless WiFi Link 4965" rev 0x61: apic > 1 int 17 (irq 11), MIMO 2T3R, MoW1, address 00:1f:3b:03:b1:59 > ppb2 at pci0 dev 28 function 2 "Intel 82801H PCIE" rev 0x03: apic 1 int 22 > (irq 11) > pci3 at ppb2 bus 4 > ppb3 at pci0 dev 28 function 3 "Intel 82801H PCIE" rev 0x03: apic 1 int 23 > (irq 11) > pci4 at ppb3 bus 5 > ppb4 at pci0 dev 28 function 4 "Intel 82801H PCIE" rev 0x03: apic 1 int 20 > (irq 11) > pci5 at ppb4 bus 13 > uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x03: apic 1 int 16 > (irq 10) > uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x03: apic 1 int 17 > (irq 11) > uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x03: apic 1 int 18 > (irq 11) > ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x03: apic 1 int 19 > (irq 11) > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf3 > pci6 at ppb5 bus 21 > cbb0 at pci6 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 1 int 16 > (irq 10) > cardslot0 at cbb0 slot 0 flags 0 > cardbus0 at cardslot0: bus 22 device 0 cacheline 0x8, lattimer 0xb0 > pcmcia0 at cardslot0 > pcib0 at pci0 dev 31 function 0 "Intel 82801HEM LPC" rev 0x03 > pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x03: DMA, channel > 0 configured to compatibility, channel 1 configured to compatibility > atapiscsi0 at pciide0 channel 0 drive 0 > scsibus0 at atapiscsi0: 2 targets > cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD/CDRW UJDA775, CB03> ATAPI > 5/cdrom removable > cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > pciide0: channel 1 ignored (disabled) > ahci0 at pci0 dev 31 function 2 "Intel 82801HBM AHCI" rev 0x03: apic 1 int 16 > (irq 10), AHCI 1.1 > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 0 lun 0: <ATA, FUJITSU MHW2160B, 0084> SCSI3 0/direct > fixed > sd0: 152627MB, 512 bytes/sec, 312581808 sec total > ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x03: apic 1 int > 23 (irq 11) > iic0 at ichiic0 > usb2 at uhci0: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci1: USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb4 at uhci2: USB revision 1.0 > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb5 at uhci3: USB revision 1.0 > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb6 at uhci4: USB revision 1.0 > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > pckbc0: using irq 12 for aux slot > wsmouse0 at pms0 mux 0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > aps0 at isa0 port 0x1600/31 > mtrr: Pentium Pro MTRR support > softraid0 at root > root on sd0a swap on sd0b dump on sd0b -- [email protected] SDF Public Access UNIX System - http://sdf.lonestar.org
