I confirm -- disabling softraid did not fix it. Actually, I went for option of installing OpenBSD after reading Freds' webpage on the topic ;-).
/wbr Ariel Burbaickij On Sun, Jul 11, 2010 at 12:16 AM, Fred Crowson <[email protected]> wrote: > On 10 July 2010 06:58, Joel Sing <[email protected]> wrote: >> Hi Ariel/Fred, >> >> Could one of you please try a current kernel with softraid disabled (boot >> with 'bsd -c' and type 'disable softraid' and then 'quit' at the UKC > prompt) >> and let me know if this resolves the issue? >> >> Thanks, >> >> Joel > > Hi Joel, > > Booting with softraid disabled does not solve the issue. > > Hopefully, I'll find time over the next few weeks to do more investigations > > thanks > > Fred > > Output of boot process follows: > > Connected >>> OpenBSD/i386 BOOT 3.02 > boot> bsd -c > booting hd0a:bsd: > /-\|/8127708-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/- > \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\ > |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\| > /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ > -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/- > \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\ > |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-+1088136\ > [61+365104|/-\|/-\|/-\|/-\|/-\|/+350630-\|/-\|/-\|/-\|/-\|/-]=0x978d18 > entry point at 0x200120 > > [ using 716212 bytes of bsd ELF symbol table ] > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > Copyright (c) 1995-2010 OpenBSD. All rights reserved. http://www.OpenBSD.org > > OpenBSD 4.7-current (GENERIC) #111: Sat Jul 10 00:33:14 MDT 2010 > [email protected]:/usr/src/sys/arch/i386/compile/GENERIC > cpu0: Intel Pentium/MMX ("GenuineIntel" 586-class) 121 MHz > cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,MMX > real mem = 16478208 (15MB) > avail mem = 6356992 (6MB) > User Kernel Config > UKC> disable softraid > 9 softraid0 disabled > UKC> quit > Continuing... > mainbus0 at root > bios0 at mainbus0: AT/286+ BIOS, date 11/11/97 > apm0 at bios0: Power Management spec V1.2 > apm0: battery life expectancy 100% > apm0: AC on, battery charge high, charging > pcibios at bios0 function 0x1a not configured > bios0: ROM list: 0xe4000/0xc000 > cpu0 at mainbus0: (uniprocessor) > cpu0: F00F bug workaround installed > isa0 at mainbus0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com0: console > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard > pms0 at pckbc0 (aux slot) > pckbc0: using irq 12 for aux slot > wsmouse0 at pms0 mux 0 > vga0 at isa0 port 0x3b0/48 iomem 0xa0000/131072 > wsdisplay0 at vga0 mux 1: console (80x25, vt100 emulation), using wskbd0 > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > wdc0 at isa0 port 0x1f0/8 irq 14 > wd0 at wdc0 channel 0 drive 0: <BI-MDDAL2-6102> > wd0: 16-sector PIO, LBA, 1551MB, 3177216 sectors > wd0(wdc0:0:0): using BIOS timings > sb0 at isa0 port 0x220/24 irq 5 drq 1: dsp v3.01 > midi0 at sb0: <SB MIDI UART> > audio0 at sb0 > opl0 at sb0: model OPL3 > midi1 at opl0: <SB Yamaha OPL3> > wss0 at isa0 port 0x530/8 irq 10 drq 0: CS4231 or AD1845 (vers 4) > audio1 at wss0 > pcppi0 at isa0 port 0x61 > midi2 at pcppi0: <PC speaker> > spkr0 at pcppi0 > lpt0 at isa0 port 0x378/4 irq 7 > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/65536 > pcic0 controller 0: <Intel 82365SL rev 1> has sockets A and B > pcmcia0 at pcic0 controller 0 socket 0 > xe0 at pcmcia0 function 0 "Xircom, CreditCard 10Base-T, PS-CE2-10" > port 0x340/16, irq 9: address 00:80:c7:42:37:d9 > pcmcia1 at pcic0 controller 0 socket 1 > pcic0: irq 11, polling enabled > biomask e145 netmask e345 ttymask fbdf > vscsi0 at root > scsibus0 at vscsi0: 256 targets > root device softraid not configured > kernel: integer divide fault trap, code=0 > Stopped at cpu_switchto+0x76: popl %ebx > ddb> ps > PID PPID PGRP UID S FLAGS WAIT COMMAND > 8 0 0 0 2 0x100200 pfpurge > 7 0 0 0 2 0x100200 pcic0,0,1 > 6 0 0 0 2 0x100200 pcic0,0,0 > 5 0 0 0 2 0x100200 apm0 > 4 0 0 0 2 0x100200 syswq > 3 0 0 0 2 0x100200 idle0 > 2 0 0 0 2 0x100200 kmthread > * 1 0 0 0 7 0 swapper > 0 -1 0 0 3 0x80200 wdccmd swapper > ddb> trace > cpu_switchto(d0202fe5,0,d0b7af08,d03ecf17,d09a1458) at cpu_switchto+0x76 > end(0,0,0,efffeecc,efffeecc) at 0xd0b7aed8 > (null)(d0d1c004,d0997aa0,0,73637376,3069) at 0 > ddb> boot poweroff > > Attempting to power down... > ~ > [EOT]
