(I searched Google, but not much turned up.)
Since I upgraded to 4.7; what I get is:
# pwd
/etc
# cat pf.conf
# works?
# pfctl -f pf.conf.47
pfctl: DIOCBEGINADDRS: Operation not supported by device
# pfctl -f /etc/pf.conf
pfctl: DIOCXCOMMIT: Device busy
Huh?
(Actually I had used the original pf.conf, with the alterations for
anchors done. Then I got this; and it seems pfctl is doing some
nonsense: even a comment is not read and executed.)
# which pfctl
/sbin/pfctl
# md5 /sbin/pfctl
MD5 (/sbin/pfctl) = 3e1fa4f69809adff432f9da62010a6a7
(this is amd64)
No changes of the hardware; I have no access to the machine.
Any hint will be appreciated,
Uwe
OpenBSD 4.7 (GENERIC.MP) #130: Wed Mar 17 20:48:50 MDT 2010
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2146381824 (2046MB)
avail mem = 2079801344 (1983MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xec000 (78 entries)
bios0: vendor HP version "D19" date 07/16/2007
bios0: HP ProLiant ML350 G4p
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP SPCR MCFG APIC
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(TM) CPU 3.20GHz, 3200.58 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR,LONG
cpu0: 2MB 64b/line 8-way L2 cache
cpu0: apic clock running at 200MHz
cpu1 at mainbus0: apid 6 (application processor)
cpu1: Intel(R) Xeon(TM) CPU 3.20GHz, 3200.12 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR,LONG
cpu1: 2MB 64b/line 8-way L2 cache
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Xeon(TM) CPU 3.20GHz, 3200.12 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR,LONG
cpu2: 2MB 64b/line 8-way L2 cache
cpu3 at mainbus0: apid 7 (application processor)
cpu3: Intel(R) Xeon(TM) CPU 3.20GHz, 3200.12 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR,LONG
cpu3: 2MB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0: apid 9 pa 0xfec10000, version 20, 24 pins
ioapic1: misconfigured as apic 0, remapped to apid 9
ioapic2 at mainbus0: apid 10 pa 0xfec80000, version 20, 24 pins
ioapic3 at mainbus0: apid 11 pa 0xfec80400, version 20, 24 pins
acpiprt0 at acpi0: bus 1 (IP2P)
acpiprt1 at acpi0: bus 2 (IPXB)
acpiprt2 at acpi0: bus 6 (PCXA)
acpiprt3 at acpi0: bus 9 (PCXB)
acpiprt4 at acpi0: bus 5 (PTA0)
acpiprt5 at acpi0: bus 13 (PTB0)
acpiprt6 at acpi0: bus 16 (PTC0)
acpiprt7 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpicpu2 at acpi0
acpicpu3 at acpi0
acpitz0 at acpi0: critical temperature 31 degC
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel E7520 Host" rev 0x0c
ppb0 at pci0 dev 2 function 0 "Intel E7520 PCIE" rev 0x0c
pci1 at ppb0 bus 5
ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci2 at ppb1 bus 6
ppb2 at pci1 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci3 at ppb2 bus 9
rl0 at pci3 dev 2 function 0 "D-Link Systems 530TX+" rev 0x10: apic 11
int 0 (irq 3), address 00:11:95:5e:50:ba
rlphy0 at rl0 phy 0: RTL internal PHY
ppb3 at pci0 dev 4 function 0 "Intel E7520 PCIE" rev 0x0c
pci4 at ppb3 bus 13
ppb4 at pci0 dev 6 function 0 "Intel E7520 PCIE" rev 0x0c
pci5 at ppb4 bus 16
ppb5 at pci0 dev 28 function 0 "Intel 6300ESB PCIX" rev 0x02
pci6 at ppb5 bus 2
mpi0 at pci6 dev 3 function 0 "Symbios Logic 53c1030" rev 0x08: apic 9
int 0 (irq 10)
scsibus0 at mpi0: 16 targets, initiator 7
sd0 at scsibus0 targ 0 lun 0: <COMPAQ, BF1468A4CC, HPB5> SCSI3 0/direct
fixed
sd0: 140014MB, 512 bytes/sec, 286749488 sec total
sd1 at scsibus0 targ 2 lun 0: <COMPAQ, BF03688284, HPB3> SCSI3 0/direct
fixed
sd1: 34732MB, 512 bytes/sec, 71132000 sec total
sd2 at scsibus0 targ 5 lun 0: <COMPAQ, BD1468A4C5, HPB4> SCSI3 0/direct
fixed
sd2: 140014MB, 512 bytes/sec, 286749488 sec total
mpi0: target 0 Sync at 160MHz width 16bit offset 63 QAS 1 DT 1 IU 1
mpi0: target 2 Sync at 160MHz width 16bit offset 63 QAS 1 DT 1 IU 1
mpi0: target 5 Sync at 160MHz width 16bit offset 63 QAS 1 DT 1 IU 1
mpi1 at pci6 dev 3 function 1 "Symbios Logic 53c1030" rev 0x08: apic 9
int 1 (irq 10)
scsibus1 at mpi1: 16 targets, initiator 7
uhci0 at pci0 dev 29 function 0 "Intel 6300ESB USB" rev 0x02: apic 8 int
16 (irq 3)
uhci1 at pci0 dev 29 function 1 "Intel 6300ESB USB" rev 0x02: apic 8 int
19 (irq 5)
"Intel 6300ESB WDT" rev 0x02 at pci0 dev 29 function 4 not configured
"Intel 6300ESB APIC" rev 0x02 at pci0 dev 29 function 5 not configured
ehci0 at pci0 dev 29 function 7 "Intel 6300ESB USB" rev 0x02: apic 8 int
23 (irq 7)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb6 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x0a
pci7 at ppb6 bus 1
bge0 at pci7 dev 2 function 0 "Broadcom BCM5705K" rev 0x03, BCM5705 A3
(0x3003): apic 8 int 17 (irq 11), address 00:15:60:0b:65:60
brgphy0 at bge0 phy 1: BCM5705 10/100/1000baseT PHY, rev. 2
vga1 at pci7 dev 3 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Compaq iLO" rev 0x01 at pci7 dev 4 function 0 not configured
"Compaq iLO" rev 0x01 at pci7 dev 4 function 2 not configured
pcib0 at pci0 dev 31 function 0 "Intel 6300ESB LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 6300ESB IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
atapiscsi0 at pciide0 channel 1 drive 1
scsibus2 at atapiscsi0: 2 targets
cd0 at scsibus2 targ 0 lun 0: <HL-DT-ST, CD-ROM GCR-8482B, 2.09> ATAPI
5/cdrom removable
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mtrr: Pentium Pro MTRR support
ugen0 at uhub2 port 1 "American Power Conversion Back-UPS RS 1000
FW:7.g8 .I USB FW:g8" rev 1.10/1.06 addr 2
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33160
priority: 0
groups: lo
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
rl0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:11:95:5e:50:ba
priority: 0
media: Ethernet autoselect
status: no carrier
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:15:60:0b:65:60
priority: 0
groups: egress
media: Ethernet 100baseTX full-duplex
status: active
inet 172.16.0.14 netmask 0xffffff00 broadcast 172.16.0.255
inet6 fe80::215:60ff:fe0b:6560%bge0 prefixlen 64 scopeid 0x2
enc0: flags=0<> mtu 1536
priority: 0
pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33160
priority: 0
groups: pflog
