Hello.
I have one of these motherboards:
http://www.supermicro.com/Aplus/motherboard/Opteron/HT2000/H8DSP-i.cfm
Disk activity is a problem on this motherboard. Fscking, or a couple of
dd's from /dev/zero to a file on the hard disk result in the below error.
I could not finish the install from the cd because this error comes up.
I put the sata disk in a different machine for the install, and then
back into this machine.
wd0(pciide0:2:0): timeout
type: ata
c_bcount: 65536
c_skip: 0
pciide0:2:0 bus-master DMA error: missing interrupt status=0x21
pciide0 channel 2: reset failed for drive 0
wd0a: device timeout reading fsbn 123157536 of 123157536-123157663 (wd0 bn
127458399; cn 7933 tn 234 sn12), retrying
pciide0:2:0 not ready, st=0xd0<BSY,DRDY,DSC>,err=0x00
pciide0 channel 2: reset failed for drive 0
I tried add flags for the wd device with 'boot -c', change wd,
flags 0xffc or 0xff0
but neither seemed to help. Maybe you can suggest a better flags value ?
Or perhaps there is something else, besides flags to adjust?
Additionally, ps2 keyboards don't work after the kernel boots, but USB ones
do.
(i tried disabling apm and acpi, but neither helped to fix the keyboard or
disk issue.)
Lastly, there are no bios updates from supermicro available.
OpenBSD 4.7-beta (RAMDISK_CD) #308: Wed Jan 27 19:34:30 MST 2010
[email protected]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 2146369536 (2046MB)
avail mem = 2081468416 (1985MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xfbae0 (60 entries)
bios0: vendor American Megatrends Inc. version "080011" date 06/30/2006
bios0: Supermicro H8DSP-8
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC OEMB SRAT
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Opteron(tm) Processor 250, 2394.38 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,MMX,FXSR,SSE,SSE2,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line
16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: AMD erratum 89 present, BIOS upgrade may be required
cpu0: apic clock running at 199MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 11, 16 pins
ioapic1 at mainbus0: apid 3 pa 0xfec01000, version 11, 16 pins
ioapic2 at mainbus0: apid 4 pa 0xfec02000, version 11, 16 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P1)
acpiprt2 at acpi0: bus 2 (P1P2)
acpiprt3 at acpi0: bus 3 (BR14)
acpiprt4 at acpi0: bus 4 (BR1E)
acpiprt5 at acpi0: bus 5 (BR28)
acpiprt6 at acpi0: bus 6 (BR32)
acpiprt7 at acpi0: bus 7 (BR3C)
pci0 at mainbus0 bus 0
ppb0 at pci0 dev 1 function 0 "ServerWorks HT-1000 PCI" rev 0x00
pci1 at ppb0 bus 1
ppb1 at pci1 dev 13 function 0 "ServerWorks HT-1000 PCIX" rev 0xb2
pci2 at ppb1 bus 2
pciide0 at pci1 dev 14 function 0 "ServerWorks HT-1000 SATA" rev 0x00: DMA
pciide0: using apic 2 int 11 (irq 11) for native-PCI interrupt
pciide0: port 0: PHY offline
pciide0: port 1: PHY offline
pciide0: port 2: device present, speed: 1.5Gb/s
wd0 at pciide0 channel 2 drive 0: <WDC WD1500ADFD-00NLR1>
wd0: 16-sector PIO, LBA48, 143089MB, 293046768 sectors
wd0(pciide0:2:0): using PIO mode 4, Ultra-DMA mode 6
pciide0: port 3: device present, speed: 1.5Gb/s
wd1 at pciide0 channel 3 drive 0: <WDC WD1500ADFD-00NLR1>
wd1: 16-sector PIO, LBA48, 143089MB, 293046768 sectors
wd1(pciide0:3:0): using PIO mode 4, Ultra-DMA mode 6
pchb0 at pci0 dev 2 function 0 "ServerWorks HT-1000" rev 0x00
pciide1 at pci0 dev 2 function 1 "ServerWorks HT-1000 IDE" rev 0x00: DMA
atapiscsi0 at pciide1 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-ROM SR-8178, PZ16> ATAPI 5/cdrom
removable
cd0(pciide1:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 0
"ServerWorks HT-1000 LPC" rev 0x00 at pci0 dev 2 function 2 not configured
ohci0 at pci0 dev 3 function 0 "ServerWorks HT-1000 USB" rev 0x01: apic 2 int
10 (irq 10), version 1.0, legacy support
ohci1 at pci0 dev 3 function 1 "ServerWorks HT-1000 USB" rev 0x01: apic 2 int
10 (irq 10), version 1.0, legacy support
ehci0 at pci0 dev 3 function 2 "ServerWorks HT-1000 USB" rev 0x01: apic 2 int
10 (irq 10)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ServerWorks EHCI root hub" rev 2.00/1.00 addr 1
vga1 at pci0 dev 5 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
ppb2 at pci0 dev 8 function 0 "ServerWorks HT-2000 PCIX" rev 0xa3
pci3 at ppb2 bus 3
ppb3 at pci0 dev 9 function 0 "ServerWorks HT-2000 PCIX" rev 0xa3
pci4 at ppb3 bus 4
bge0 at pci4 dev 4 function 0 "Broadcom BCM5780" rev 0x03, BCM5714 B3
(0x8003): apic 3 int 1 (irq 9), address xx:xx:xx:xx:xx:xx
brgphy0 at bge0 phy 1: BCM5780 10/100/1000baseT/SX PHY, rev. 0
bge1 at pci4 dev 4 function 1 "Broadcom BCM5780" rev 0x03, BCM5714 B3
(0x8003): apic 3 int 3 (irq 5), address xx:xx:xx:xx:xx:xx
brgphy1 at bge1 phy 1: BCM5780 10/100/1000baseT/SX PHY, rev. 0
ppb4 at pci0 dev 10 function 0 "ServerWorks HT-2000 PCIE" rev 0xa3
pci5 at ppb4 bus 5
ppb5 at pci0 dev 11 function 0 "ServerWorks HT-2000 PCIE" rev 0xa3
pci6 at ppb5 bus 6
ppb6 at pci0 dev 12 function 0 "ServerWorks HT-2000 PCIE" rev 0xa3
pci7 at ppb6 bus 7
ppb7 at pci0 dev 13 function 0 "ServerWorks HT-2000 PCIE" rev 0xa3
pci8 at ppb7 bus 8
pchb1 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
pchb4 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00
pchb5 at pci0 dev 25 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb6 at pci0 dev 25 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb7 at pci0 dev 25 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
pchb8 at pci0 dev 25 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "ServerWorks OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "ServerWorks OHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
rd0: fixed, 4480 blocks
uhidev0 at uhub1 port 1 configuration 1 interface 0 "Microsoft Natural\M-.
Ergonomic Keyboard 4000" rev 2.00/1.73 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1 "Microsoft Natural\M-.
Ergonomic Keyboard 4000" rev 2.00/1.73 addr 2
uhidev1: iclass 3/0, 1 report id
uhid at uhidev1 reportid 1 not configured
softraid0 at root
root on rd0a swap on rd0b dump on rd0b
WARNING: R/W mount of / denied. Filesystem is not clean - run fsck
WARNING: / was not properly unmounted
_________________________________________________________________
Hotmail: Free, trusted and rich email service.
http://clk.atdmt.com/GBL/go/201469228/direct/01/
