In src/sys/dev/usb/umsm.c change the line
{{ USB_VENDOR_NOVATEL, USB_PRODUCT_NOVATEL_ZEROCD2 }, 0},
to
{{ USB_VENDOR_NOVATEL, USB_PRODUCT_NOVATEL_ZEROCD2 }, DEV_UMASS1},
then try DEV_UMASS2, DEV_UMASS3 & DEV_UMASS4 if that doesn't work.
On Tue, Dec 29, 2009 at 12:00:13PM -0600, c l wrote:
> Anyone know how to make the Novatel u760 attach with umsm? Is there something
> I can modify in usbdevs.h to make it work? The man page says it's "suspected"
> to work.
>
> usbdevs -v
> Controller /dev/usb0:
> addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
> Intel(0x8086), rev 1.00
> port 1 powered
> port 2 powered
> port 3 addr 2: high speed, self powered, config 1, USB Mass Storage
> Device(0x0701), Genesyslogic(0x05e3), rev 0.33
> port 4 powered
> port 5 powered
> port 6 powered
> port 7 powered
> port 8 powered
> Controller /dev/usb1:
> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
> Intel(0x8086), rev 1.00
> port 1 powered
> port 2 powered
> Controller /dev/usb2:
> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
> Intel(0x8086), rev 1.00
> port 1 powered
> port 2 addr 2: full speed, power 500 mA, config 1, Novatel Wireless
> CDMA(0x5030), Novatel Wireless Inc.(0x1410), rev 0.00, iSerialNumber
> 091154835350000
> Controller /dev/usb3:
> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
> Intel(0x8086), rev 1.00
> port 1 powered
> port 2 powered
> Controller /dev/usb4:
> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
> Intel(0x8086), rev 1.00
> port 1 powered
> port 2 powered
>
>
>
>
> dmesg...
> OpenBSD 4.6-current (GENERIC) #471: Sat Dec 26 21:08:05 MST 2009
> [email protected]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Pentium(R) M processor 1.60GHz ("GenuineIntel" 686-class) 1.60
> GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,A
> CPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,ES
> T,TM2
> real mem = 1063743488 (1014MB)
> avail mem = 1022042112 (974MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 12/14/06, BIOS32 rev. 0 @ 0xfd750,
> SMBIOS rev. 2.33 @ 0xe0010 (59 entries)
> bios0: vendor IBM version "74ET64WW (2.09 )" date 12/14/2006
> bios0: IBM 2525F6U
> apm0 at bios0: Power Management spec V1.2
> apm0: battery life expectancy 98%
> apm0: AC on, battery charge high, charging
> acpi at bios0 function 0x0 not configured
> pcibios0 at bios0: rev 2.1 @ 0xfd6e0/0x920
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdec0/240 (13 entries)
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
> pcibios0: PCI bus #5 is the last bus
> bios0: ROM list: 0xc0000/0xf600! 0xcf800/0x1600 0xd1000/0x1000 0xdc000/0x4000!
> 0xe0000/0x10000
> cpu0 at mainbus0: (uniprocessor)
> cpu0: Enhanced SpeedStep 1597 MHz: speeds: 1600, 1500, 1400, 1300, 1200, 1100,
> 1000, 900, 800, 600 MHz
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> mem address conflict 0x3f700000/0x80000
> io address conflict 0x5800/0x8
> io address conflict 0x5808/0x4
> io address conflict 0x5810/0x8
> io address conflict 0x580c/0x4
> pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x03
> vga1 at pci0 dev 2 function 0 "Intel 82915GM Video" rev 0x03
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> intagp0 at vga1
> agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
> inteldrm0 at vga1: irq 11
> drm0 at inteldrm0
> "Intel 82915GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
> ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03: irq 11
> pci1 at ppb0 bus 2
> bge0 at pci1 dev 0 function 0 "Broadcom BCM5751M" rev 0x11, BCM5750 B1
> (0x4101): irq 11, address 00:16:d3:b1:de:90
> brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
> uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 11
> uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 11
> uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 11
> uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: irq 11
> ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 11
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd3
> pci2 at ppb1 bus 4
> cbb0 at pci2 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0x8d: irq 11
> sdhc0 at pci2 dev 0 function 1 "Ricoh 5C822 SD/MMC" rev 0x13: irq 11
> sdmmc0 at sdhc0
> iwi0 at pci2 dev 2 function 0 "Intel PRO/Wireless 2915ABG" rev 0x05: irq 11,
> address 00:13:ce:67:c7:5a
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 5 device 0 cacheline 0x0, lattimer 0xb0
> pcmcia0 at cardslot0
> auich0 at pci0 dev 30 function 2 "Intel 82801FB AC97" rev 0x03: irq 11, ICH6
> AC97
> ac97: codec id 0x41445374 (Analog Devices AD1981B)
> ac97: codec features headphone, 20 bit DAC, No 3D Stereo
> audio0 at auich0
> "Intel 82801FB Modem" rev 0x03 at pci0 dev 30 function 3 not configured
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x03: PM disabled
> pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x03: DMA, channel
> 0 wired to compatibility, channel 1 wi
> red to compatibility
> wd0 at pciide0 channel 0 drive 0: <HTC426060G9AT00>
> wd0: 16-sector PIO, LBA, 57231MB, 117210240 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x03: irq 11
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x51: 512MB DDR2 SDRAM non-parity PC2-4200CL5 SO-DIMM
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci3: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> aps0 at isa0 port 0x1600/31
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> biomask eff5 netmask eff5 ttymask ffff
> mtrr: Pentium Pro MTRR support
> umass0 at uhub0 port 3 configuration 1 interface 0 "Genesyslogic USB Mass
> Storage Device" rev 2.00/0.33 addr 2
> umass0: using ATAPI over Bulk-Only
> scsibus0 at umass0: 2 targets, initiator 0
> cd0 at scsibus0 targ 1 lun 0: <TEAC, DV-W28EW, R.2A> ATAPI 5/cdrom removable
> vscsi0 at root
> scsibus1 at vscsi0: 256 targets
> softraid0 at root
> root on wd0a swap on wd0b dump on wd0b
> umass1 at uhub2 port 2 configuration 1 interface 0 "Novatel Wireless Inc.
> Novatel Wireless CDMA" rev 1.10/0.00 addr 2
> umass1: using SCSI over Bulk-Only
> scsibus2 at umass1: 2 targets, initiator 0
> cd1 at scsibus2 targ 1 lun 0: <Novatel, Mass Storage, 1.00> SCSI2 5/cdrom
> removable
> umass2 at uhub2 port 2 configuration 1 interface 1 "Novatel Wireless Inc.
> Novatel Wireless CDMA" rev 1.10/0.00 addr 2
> umass2: using SCSI over Bulk-Only
> scsibus3 at umass2: 2 targets, initiator 0
> sd0 at scsibus3 targ 1 lun 0: <Novatel, MMC Storage, 2.31> SCSI2 0/direct
> removable
> sd0: drive offline
>
> _________________________________________________________________
> Hotmail: Free, trusted and rich email service.
> http://clk.atdmt.com/GBL/go/171222984/direct/01/
