Yes, sorry:
OpenBSD 4.6 (R0NIN) #0: Sun Nov 29 15:32:11 ART 2009
[email protected]:/usr/src/sys/arch/i386/compile/R0NIN
cpu0: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz ("GenuineIntel"
686-class) 2 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR
real mem = 1046761472 (998MB)
avail mem = 1003307008 (956MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 04/18/08, BIOS32 rev. 0 @
0xfdc80, SMBIOS rev. 2.4 @ 0xe0010 (63 entries)
bios0: vendor LENOVO version "7NETB2WW (2.12 )" date 04/18/2008
bios0: LENOVO 767474Y
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG HPET SLIC BOOT ASF!
SSDT SSDT SSDT SSDT
acpi0: wakeup devices LID_(S3) SLPB(S3) DURT(S3) IGBE(S4) EXP0(S4)
EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) PCI1(S4) USB0(S3) USB1(S3)
USB2(S3) USB3(S3) USB4(S3) EHC0(S3) EHC1(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 199MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2, remapped to apid 1
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (AGP_)
acpiprt2 at acpi0: bus 2 (EXP0)
acpiprt3 at acpi0: bus 3 (EXP1)
acpiprt4 at acpi0: bus -1 (EXP2)
acpiprt5 at acpi0: bus -1 (EXP3)
acpiprt6 at acpi0: bus -1 (EXP4)
acpiprt7 at acpi0: bus 5 (PCI1)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpipwrres0 at acpi0: PUBS
acpitz0 at acpi0: critical temperature 127 degC
acpitz1 at acpi0: critical temperature 99 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "42T4568" serial 6706 type LION oem "SONY"
acpibat1 at acpi0: BAT1 not present
acpibat2 at acpi0: BAT2 not present
acpiac0 at acpi0: AC unit offline
acpithinkpad0 at acpi0
acpidock0 at acpi0: GDCK not docked (0)
bios0: ROM list: 0xc0000/0x10000! 0xe0000/0x10000!
cpu0: Enhanced SpeedStep 1996 MHz: speeds: 2001, 2000, 1600, 1200, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x0c
vga1 at pci0 dev 2 function 0 "Intel GM965 Video" rev 0x0c
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0 at vga1: apic 1 int 16 (irq 10)
drm0 at inteldrm0
"Intel GM965 Video" rev 0x0c at pci0 dev 2 function 1 not configured
em0 at pci0 dev 25 function 0 "Intel ICH8 IGP M AMT" rev 0x03: apic 1
int 20 (irq 11), address 00:1d:72:92:6c:8f
uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x03: apic 1
int 20 (irq 11)
uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x03: apic 1
int 21 (irq 11)
ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x03: apic 1
int 22 (irq 11)
usb0 at ehci0: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf3
pci3 at ppb2 bus 5
cbb0 at pci3 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 1
int 16 (irq 10)
"Ricoh 5C832 Firewire" rev 0x04 at pci3 dev 0 function 1 not configured
sdhc0 at pci3 dev 0 function 2 "Ricoh 5C822 SD/MMC" rev 0x21: apic 1
int 18 (irq 11)
sdmmc0 at sdhc0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 6 device 0 cacheline 0x0, lattimer 0xb0
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0 "Intel 82801HEM LPC" rev 0x03
pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x03: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801HBM AHCI" rev 0x03: apic 1
int 16 (irq 10), AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD800BEVS-08, 08.0> SCSI3 0/direct
fixed
sd0: 76319MB, 512 bytes/sec, 156301488 sec total
ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x03: apic
1 int 23 (irq 11)
iic0 at ichiic0
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
ugen0 at uhub2 port 2 "STMicroelectronics Biometric Coprocessor" rev
1.00/0.01 addr 2
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
The kernel only have the oficial patchs.
Best regards
2009/12/21 Aaron Mason <[email protected]>:
> On Mon, Dec 21, 2009 at 9:47 AM, Gonzalo Lionel Rodriguez
> <[email protected]> wrote:
>> Hi all.
>>
>> I have a problem with a few wireless networks (WPA2) and my 'iwn' (on
>> my Thinkpad x61) in OpenBSD 4.6 (stable), the iwn0 disconnect from the
>> network with this error:
>>
>> iwn0: fatal firmware error
>> firmware error log:
>> error type = "NMI_INTERRUPT_WDG" (0x00000004)
>> program counter = 0x0000046C
>> source line = 0x000000D0
>> error data = 0x0000000202430000
>> branch link = 0x00002F3E000004C2
>> interrupt link = 0x000006DE00002FCE
>> time = 832655995
>> driver status:
>> tx ring 0: qid=0 cur=201 queued=0
>> tx ring 1: qid=1 cur=0 queued=0
>> tx ring 2: qid=2 cur=0 queued=0
>> tx ring 3: qid=3 cur=0 queued=0
>> tx ring 4: qid=4 cur=166 queued=0
>> tx ring 5: qid=5 cur=0 queued=0
>> tx ring 6: qid=6 cur=0 queued=0
>> tx ring 7: qid=7 cur=0 queued=0
>> tx ring 8: qid=8 cur=0 queued=0
>> tx ring 9: qid=9 cur=0 queued=0
>> tx ring 10: qid=10 cur=0 queued=0
>> tx ring 11: qid=11 cur=0 queued=0
>> tx ring 12: qid=12 cur=0 queued=0
>> tx ring 13: qid=13 cur=0 queued=0
>> tx ring 14: qid=14 cur=0 queued=0
>> tx ring 15: qid=15 cur=0 queued=0
>> rx ring: cur=26
>> 802.11 state 4
>> iwn0: fatal firmware error
>> firmware error log:
>> error type = "NMI_INTERRUPT_WDG" (0x00000004)
>> program counter = 0x0000046C
>> source line = 0x000000D0
>> error data = 0x0000000202030000
>> branch link = 0x00002F3E000004C2
>> interrupt link = 0x000006DE00002FCE
>> time = 2969436787
>> driver status:
>> tx ring 0: qid=0 cur=137 queued=0
>> tx ring 1: qid=1 cur=0 queued=0
>> tx ring 2: qid=2 cur=0 queued=0
>> tx ring 3: qid=3 cur=0 queued=0
>> tx ring 4: qid=4 cur=92 queued=0
>> tx ring 5: qid=5 cur=0 queued=0
>> tx ring 6: qid=6 cur=0 queued=0
>> tx ring 7: qid=7 cur=0 queued=0
>> tx ring 8: qid=8 cur=0 queued=0
>> tx ring 9: qid=9 cur=0 queued=0
>> tx ring 10: qid=10 cur=0 queued=0
>> tx ring 11: qid=11 cur=0 queued=0
>> tx ring 12: qid=12 cur=0 queued=0
>> tx ring 13: qid=13 cur=0 queued=0
>> tx ring 14: qid=14 cur=0 queued=0
>> tx ring 15: qid=15 cur=0 queued=0
>> rx ring: cur=47
>> 802.11 state 4
>>
>> With a 'dhclient iwn0' works again.
>>
>> Any ideas?
>>
>> Best regards.
>>
>>
>
> dmesg please?
>
> --
> Aaron Mason - Programmer, open source addict
> I've taken my software vows - for beta or for worse
