On Sun, Nov 29, 2009 at 12:19 AM, Andre Keller <[email protected]> wrote:
> Am 28.11.2009 16:36, schrieb ~Lst:
>> No, I just install and followed manual.
>>
>
> You either missed a step or run an very uncommon configuration
It might be I missed a step, Could you help where is the step that I missed ?
>> And if via bgplgsh (CLI) the whole thing is ok.
>>
>
> Through which user you run bgplgsh?
>
-bash-4.0# su - bgplg
Orion-OpenBGPD-LG> show ip bgp memory
RDE memory statistics
0 IPv4 network entries using 0B of memory
0 rib entries using 0B of memory
0 prefix entries using 0B of memory
0 BGP path attribute entries using 0B of memory
0 BGP AS-PATH attribute entries using 0B of memory,
and holding 0 references
0 BGP attributes entries using 0B of memory
and holding 0 references
0 BGP attributes using 0B of memory
RIB using 0B of memory
-bash-4.0# id bgplg
uid=1001(bgplg) gid=1001(bgplg) groups=1001(bgplg)
I tested if www using bgplgsh...
-bash-4.0# chsh -s /usr/bin/bgplgsh www
-bash-4.0# su - www
Orion-OpenBGPD-LG> show ip bgp memory
RDE memory statistics
0 IPv4 network entries using 0B of memory
0 rib entries using 0B of memory
0 prefix entries using 0B of memory
0 BGP path attribute entries using 0B of memory
0 BGP AS-PATH attribute entries using 0B of memory,
and holding 0 references
0 BGP attributes entries using 0B of memory
and holding 0 references
0 BGP attributes using 0B of memory
RIB using 0B of memory
These 2 users is ok using CLI but not if tested via web, If you'd like
to see you could test on my web...
http://203.84.157.250/cgi-bin/bgplg
Rgds,
--
~Lst
