I still could'nt ear anything, I don't understand what wrong I am doing.
The integrated MB card is not detected at all thought I could look after
the bios settings, however not necessary and I prefer to use the SB Live
if this is something possible.

Le mercredi 29 juillet 2009 C  08:22 +0200, Alexandre Ratchov a C)crit :
> On Tue, Jul 28, 2009 at 11:13:47PM +0200, Jean-FranC'ois SIMON wrote:
> > Hi,
> > 
> > I am runing VLC under fvwm but could not have any sound.
> > 
> > Are things working by default or there might be something to tune in
> > general, or in my case ?
> > 
> 
> in most cases, yes. But on certain devices, you may have to
> start aucat(1) in server mode, if the application you uses
> requires sample formats not supported by the device. AFAIK
> it's not your case.
> 
> does the following produce sound?
> 
>       cat /bsd >/dev/audio
> 
> if not, try setting all ``mute'' knobs to ``off'' (eg.
> ``mixerctl outputs.headphones.mute=off''), tweak the mixer
> until you get sound with the above command.
> 
> once sound works, if vlc still doesn't work, try:
> 
>       $ SIO_DEBUG=1 vlc
> 
> and see if there are sound related error messages.
> 
> > Thanks for help.
> > 
> > dmesg | grep audio
> > audio0 at emu0
> > 
> > $ audioctl
> > name=SB Live!
> > version=0x00
> > config=emuxki
> > encodings=ulinear:8,mulaw:8*,alaw:8*,slinear:8*,slinear_le:16,ulinear_le:16*,slinear_be:16*,ulinear_be:16*
> > properties=full_duplex,mmap,independent
> > full_duplex=0
> > fullduplex=0
> > blocksize=8192
> > hiwat=8
> > lowat=1
> > output_muted=0
> > monitor_gain=0
> > mode=
> > play.rate=48000
> > play.channels=2
> > play.precision=16
> > play.encoding=slinear_le
> > play.gain=255
> > play.balance=32
> > play.port=0x0
> > play.avail_ports=0x0
> > play.seek=0
> > play.samples=0
> > play.eof=0
> > play.pause=0
> > play.error=0
> > play.waiting=0
> > play.open=0
> > play.active=0
> > play.buffer_size=65536
> > play.block_size=8192
> > play.errors=0
> > record.rate=48000
> > record.channels=2
> > record.precision=16
> > record.encoding=slinear_le
> > record.gain=255
> > record.balance=32
> > record.port=0x1
> > record.avail_ports=0x7
> > record.seek=0
> > record.samples=0
> > record.eof=0
> > record.pause=0
> > record.error=0
> > record.waiting=0
> > record.open=0
> > record.active=0
> > record.buffer_size=65536
> > record.block_size=8192
> > record.errors=0
> > 
> > $
> > mixerctl
> > 
> > outputs.master=255,255
> > outputs.master.mute=off
> > outputs.mono=255
> > outputs.mono.mute=off
> > outputs.mono.source=mixerout
> > outputs.headphones=255,255
> > outputs.headphones.mute=on
> > inputs.speaker=255
> > inputs.speaker.mute=off
> > inputs.phone=191
> > inputs.phone.mute=on
> > inputs.mic=255
> > inputs.mic.mute=on
> > inputs.mic.preamp=off
> > inputs.mic.source=mic0
> > inputs.line=255,255
> > inputs.line.mute=on
> > inputs.cd=255,255
> > inputs.cd.mute=on
> > inputs.video=191,191
> > inputs.video.mute=on
> > inputs.aux=255,255
> > inputs.aux.mute=on
> > inputs.dac=255,255
> > inputs.dac.mute=off
> > record.source=mic
> > record.volume=255,255
> > record.volume.mute=off
> > outputs.spatial=off
> > outputs.spatial.center=0
> > outputs.spatial.depth=0
> > outputs.extamp=off
> -- Alexandre

Reply via email to