Hi,
So I have this sun blade 1000, which I have been running solaris 10 on
for a while now. As far as I know all hardware is fine.
I installed 4.5 from cd today and let X autodetect my hardware, which it
did correctly, finding and using my creator (elite 3d upa). However,
there seems to be some problem with passing the keyboard to X, as after
a few keystrokes, it behaves as though the return key is stuck down, in
both GUI's and terminals. Trying to narrow down the problem, I unplugged
both the keyboard and the mouse, which made no difference.
I have reproduced this in fvwm, openbox and gnome (even at gdm). The
keyboard operates fine on the console and in the EEPROM.
Does anyone have any idea what on earth is happening here?
console is keyboard/display
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights
reserved.
Copyright (c) 1995-2009 OpenBSD. All rights reserved.
http://www.OpenBSD.org
OpenBSD 4.5 (GENERIC) #1898: Sat Feb 28 17:42:44 MST 2009
[email protected]:/usr/src/sys/arch/sparc64/compile/GENERIC
real mem = 1073741824 (1024MB)
avail mem = 1025933312 (978MB)
mainbus0 at root: SUNW,Sun-Blade-1000 (UltraSPARC-III)
cpu0 at mainbus0: SUNW,UltraSPARC-III (rev 5.14) @ 900 MHz
cpu0: physical 32K instruction (32 b/l), 64K data (32 b/l), 8192K
external (512 b/l)
"memory-controller" at mainbus0 not configured
schizo0 at mainbus0: "Schizo", version 4, ign 200, bus B 0 to 0
schizo0: dvma map c0000000-ffffffff
pci0 at schizo0
ebus0 at pci0 dev 5 function 0 "Sun RIO EBus" rev 0x01
"flashprom" at ebus0 addr 0-1fffff not configured
pcfiic0 at ebus0 addr 2e-2f, 2d-2d ivec 0x23
iic0 at pcfiic0
bbc0 at ebus0 addr 0-fffff: AID 0x00
ppm0 at ebus0 addr e-28, 728000-728003, 30002e-30002f, 300600-300607
pcfiic1 at ebus0 addr 30-31 ivec 0x23
iic1 at pcfiic1
admtemp0 at iic1 addr 0x18: max1617
tda0 at iic1 addr 0x24
"scm001" at iic1 addr 0x20 not configured
"firei" at iic1 addr 0x30 not configured
beep0 at ebus0 addr 32-37: clock 75MHz
audioce0 at ebus0 addr 200000-2000ff, 702000-70200f, 704000-70400f,
722000-722003 ivec 0x20 ivec 0x21: nvaddrs 0
audio0 at audioce0
rtc0 at ebus0 addr 300070-300071 ivec 0x24: ds1287
"gpio" at ebus0 addr 300600-300607 not configured
pmc0 at ebus0 addr 300700-300701
lpt0 at ebus0 addr 300278-300287, 30002e-30002f, 700000-70000f ivec
0x1c: polled
sab0 at ebus0 addr 400000-40007f ivec 0x22: rev 3.2
sabtty0 at sab0 port 0
sabtty1 at sab0 port 1
gem0 at pci0 dev 5 function 1 "Sun ERI Ether" rev 0x01: ivec 0x21d,
luphy0 at gem0 phy 1: LU6612 10/100 PHY, rev. 1
"Sun FireWire" rev 0x01 at pci0 dev 5 function 2 not configured
ohci0 at pci0 dev 5 function 3 "Sun USB" rev 0x01: ivec 0x21f, version
1.0, legacy support
siop0 at pci0 dev 6 function 0 "Symbios Logic 53c875" rev 0x37: ivec
0x218, using 4K of on-board RAM
scsibus0 at siop0: 16 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <NEC, CD-ROM DRIVE:465, 1.25> SCSI2
5/cdrom removable
siop1 at pci0 dev 6 function 1 "Symbios Logic 53c875" rev 0x37: ivec
0x219, using 4K of on-board RAM
scsibus1 at siop1: 16 targets, initiator 7
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "Sun OHCI root hub" rev 1.00/1.00 addr 1
schizo1 at mainbus0: "Schizo", version 4, ign 200, bus A 0 to 0
schizo1: dvma map c0000000-ffffffff
pci1 at schizo1
isp0 at pci1 dev 4 function 0 "QLogic ISP2200" rev 0x05: ivec 0x204
scsibus2 at isp0: 256 targets, initiator 107
sd0 at scsibus2 targ 2 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3
0/direct fixed
sd0: 34732MB, 512 bytes/sec, 71132959 sec total
upa0 at mainbus0
creator0 at upa0: Elite3D, model SUNW,540-3623, dac 0
wsdisplay0 at creator0 mux 1: console (std, sun emulation)
"ppm" at mainbus0 not configured
uhidev0 at uhub0 port 1 configuration 1 interface 0 "Sun Microsystems
Type 6 Mouse" rev 1.00/1.02 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons
wsmouse0 at ums0 mux 0
uhidev1 at uhub0 port 2 configuration 1 interface 0 "Sun Microsystems
Type 6 Keyboard" rev 1.00/1.01 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes, country code 32
wskbd0 at ukbd0: console keyboard, using wsdisplay0
softraid0 at root
bootpath: /p...@8,600000/SUNW,q...@4,0/f...@0,0/d...@21000004cf4c6d77,0
root on sd0a swap on sd0b dump on sd0b
wsmouse0 detached
ums0 detached
uhidev0 detached
ukbd0: was console keyboard
wskbd0 detached
ukbd0 detached
uhidev1 detached
uhidev0 at uhub0 port 1 configuration 1 interface 0 "Sun Microsystems
Type 6 Keyboard" rev 1.00/1.01 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes, country code 32
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub0 port 2 configuration 1 interface 0 "Sun Microsystems
Type 6 Mouse" rev 1.00/1.02 addr 3
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons
wsmouse0 at ums0 mux 0
--
Best Regards
Edd Barrett
(Freelance software developer / technical writer / open-source developer)
http://students.dec.bmth.ac.uk/ebarrett
