Michiel van Baak wrote: > Maybe a stupid question, or a question already asked (did not read all > the messages in this thread) but have you checked the temperature of the > soekris? > I put the soekris on it's side instead of horizontal, and the temp > dropped from lockup temp to 50C and it's running stable now. > Must be because the holes are only on the sides of the case and not in > the top.
Hi, All the sensors seem to look like this: hw.sensors.nsclpcsio0.temp0=74.00 degC (Remote) hw.sensors.nsclpcsio0.temp1=127.00 degC (Remote) hw.sensors.nsclpcsio0.temp2=57.00 degC (Local) temp1 is always 127 C (must not be used). temp0 and temp2 never vary more than +/- 2 C from what is above. 74 C seems rather high, but I recall seeing on a Soekris mailing list that this reading is actually normal. Do yours give similar readings? Tom
