Running OpenBSD on MSI Wind U-100 (report for the archives).
I've not tried everything yet, but most things seem to work just fine.
Wired networking re(4) works, wireless ral(4) works, and bluetooth ubt(4)
works.
azalia(4) works fine for both playback and recording, the volume keys
adjust outputs.master, and the speakers are muted when the headphone
jack is inserted.
Xenocara works fine with no configuration required.
The keys to attach/detach uvideo and bluetooth works, as does the key
to enable/disable the mousepad. Brightness control does not work.
uvideo(4) does not work properly (garbage images, if anything at all).
$ mixerctl -v
record.adc_mute=off [ off on ]
record.adc=120,120
record.adc2_mute=off [ off on ]
record.adc2=120,120
inputs.mix_source=mic,mic2,beep,hp { mic mic2 beep hp }
inputs.mix_mic=120,120
inputs.mix_mic2=120,120
inputs.mix_beep=120,120
inputs.mix_hp=120,120
outputs.mix2=120,120
inputs.mix2_source=dac,mix { dac mix }
outputs.mix3=120,120
inputs.mix3_source=dac2,mix { dac2 mix }
outputs.mix4=120,120
inputs.mix4_source=dac3,mix { dac3 mix }
outputs.mix5=120,120
inputs.mix5_source=dac4,mix { dac4 mix }
outputs.hp_source=mix2 [ mix2 mix3 mix4 mix5 mix8 ]
outputs.hp_mute=off [ off on ]
inputs.hp=85,85
outputs.hp_dir=output [ none output input ]
outputs.hp_boost=off [ off on ]
outputs.mic_source=mix2 [ mix2 mix3 mix4 mix5 mix8 ]
outputs.mic_mute=off [ off on ]
inputs.mic=85,85
outputs.mic_dir=input-vr80 [ none output input input-vr0 input-vr50 input-vr80
input-vr100 ]
outputs.mic_boost=off [ off on ]
inputs.mic2=85,85
outputs.mic2_dir=input-vr80 [ none output input input-vr0 input-vr50
input-vr80 input-vr100 ]
outputs.spkr_source=mix2 [ mix2 mix3 mix4 mix5 mix8 ]
outputs.spkr_mute=off [ off on ]
outputs.spkr_dir=output [ none output input input-vr0 input-vr50 input-vr80
input-vr100 ]
outputs.spkr_boost=off [ off on ]
record.adc2_source=mic,mic2,beep,hp,mix { mic mic2 beep hp mix }
record.adc_source=mic,mic2,beep,hp,mix { mic mic2 beep hp mix }
outputs.mix8=120,120
inputs.mix8_source=dac5,mix { dac5 mix }
outputs.hp_sense=unplugged [ unplugged plugged ]
outputs.mic_sense=unplugged [ unplugged plugged ]
outputs.spkr_muters=hp,mic { hp mic }
outputs.master=120,120
outputs.master.mute=off [ off on ]
outputs.master.slaves=mix2,hp,spkr { mix2 mix3 mix4 mix5 hp mic mic2 spkr mix8
}
record.volume=120,120
record.volume.mute=off [ off on ]
record.volume.slaves=adc,adc2 { adc adc2 hp mic mic2 spkr }
$ audioctl
name=HD-Audio
version=1.0
config=azalia0
encodings=slinear_le:16,slinear_le:20,slinear_le:24
properties=full_duplex,independent
full_duplex=1
fullduplex=1
blocksize=11648
hiwat=2
lowat=1
output_muted=0
monitor_gain=0
mode=play,record
play.rate=44100
play.channels=2
play.precision=16
play.encoding=slinear_le
play.gain=120
play.balance=32
play.port=0x0
play.avail_ports=0x0
play.seek=0
play.samples=0
play.eof=0
play.pause=0
play.error=0
play.waiting=0
play.open=1
play.active=0
play.buffer_size=65536
play.block_size=11648
play.errors=0
record.rate=44100
record.channels=2
record.precision=16
record.encoding=slinear_le
record.gain=120
record.balance=32
record.port=0x0
record.avail_ports=0x0
record.seek=0
record.samples=0
record.eof=0
record.pause=0
record.error=0
record.waiting=0
record.open=1
record.active=0
record.buffer_size=65536
record.block_size=11648
record.errors=0
$ sysctl hw.sensors
hw.sensors.acpitz0.temp0=49.05 degC (zone temperature)
hw.sensors.acpiac0.indicator0=On (power supply)
hw.sensors.acpibat0.volt0=11.10 VDC (voltage)
hw.sensors.acpibat0.volt1=12.42 VDC (current voltage)
hw.sensors.acpibat0.amphour0=4.01 Ah (last full capacity)
hw.sensors.acpibat0.amphour1=0.00 Ah (warning capacity)
hw.sensors.acpibat0.amphour2=0.00 Ah (low capacity)
hw.sensors.acpibat0.amphour3=3.71 Ah (remaining capacity), OK
hw.sensors.acpibat0.raw0=2 (battery charging), OK
hw.sensors.acpibat0.raw1=1012 (rate)
hw.sensors.cpu0.temp0=43.00 degC
$ mplayer tv://driver=v4l2:device=/dev/video0
MPlayer 1.0rc2-3.3.5 (C) 2000-2007 MPlayer Team
CPU: Intel(R) Atom(TM) CPU N270 @ 1.60GHz (Family: 6, Model: 28, Stepping: 2)
CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled with runtime CPU detection.
Creating config file: /home/tpfaff/.mplayer/config
Playing tv://.
TV file format detected.
Selected driver: v4l2
name: Video 4 Linux 2 input
author: Martin Olschewski <[email protected]>
comment: first try, more to come ;-)
v4l2: ioctl get standard failed: Inappropriate ioctl for device
Selected device: Generic USB video class device
Capabilites: video capture read/write streaming
supported norms:
inputs: 0 = Camera Terminal;v4l2: ioctl get input failed: Inappropriate ioctl
for device
Current input: 1
Current format: YUYV
v4l2: ioctl set format failed: Invalid argument
v4l2: ioctl set format failed: Invalid argument
v4l2: ioctl set format failed: Invalid argument
tv.c: norm_from_string(pal): Bogus norm parameter, setting default.
v4l2: ioctl enum norm failed: Inappropriate ioctl for device
Error: Cannot set norm!
Selected input hasn't got a tuner!
v4l2: ioctl set mute failed: Invalid argument
==========================================================================
Opening video decoder: [raw] RAW Uncompressed Video
VDec: vo config request - 640 x 480 (preferred colorspace: Packed YUY2)
VDec: using Packed YUY2 as output csp (no 0)
Movie-Aspect is undefined - no prescaling applied.
VO: [xv] 640x480 => 640x480 Packed YUY2
Selected video codec: [rawyuy2] vfm: raw (RAW YUY2)
==========================================================================
Audio: no sound
Starting playback...
v4l2: ioctl dequeue buffer failed: Invalid argument, idx = 0
MPlayer interrupted by signal 2 in module: video_read_frame
MPlayer interrupted by signal 8 in module: free_demuxer
$ cat /var/run/dmesg.boot
OpenBSD 4.5 (GENERIC) #1749: Sat Feb 28 14:51:18 MST 2009
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.61 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,xTPR
real mem = 2136244224 (2037MB)
avail mem = 2057359360 (1962MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 04/14/08, SMBIOS rev. 2.4 @ 0x7f607010
(45 entries)
bios0: vendor American Megatrends Inc. version "4.6.3" date 10/06/2008
bios0: MICRO-STAR INTERNATIONAL CO., LTD U-100
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP APIC MCFG SLIC SSDT SSDT SSDT
acpi0: wakeup devices P0P2(S4) PEGP(S4) USB0(S1) USB1(S1) USB2(S1) USB3(S1)
EHCI(S1) MC97(S4) P0P1(S4) P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P2)
acpiprt2 at acpi0: bus 1 (P0P4)
acpiprt3 at acpi0: bus 2 (P0P5)
acpiprt4 at acpi0: bus -1 (P0P6)
acpiprt5 at acpi0: bus -1 (P0P7)
acpiprt6 at acpi0: bus -1 (P0P8)
acpiprt7 at acpi0: bus -1 (P0P9)
acpiec0 at acpi0
acpicpu0 at acpi0
acpitz0 at acpi0: critical temperature 100 degC
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT1 model "
" serial
type LION
oem "
"
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
acpibtn2 at acpi0: SLPB
acpivideo at acpi0 not configured
bios0: ROM list: 0xc0000/0xea00! 0xcf000/0x1000
cpu0: unknown Enhanced SpeedStep CPU, msr 0x060f0c2706000c27
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 1600 MHz (1324 mV): speeds: 1600, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
inteldrm0 at vga1: apic 2 int 16 (irq 11)
drm0 at inteldrm0
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: apic 2 int
16 (irq 11)
azalia0: codecs: Realtek ALC888
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 2 int 16
(irq 11)
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8101E" rev 0x02: RTL8102E (0x3480), apic
2 int 16 (irq 11), address 00:21:85:e1:d0:9f
rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 2 int 17
(irq 10)
pci2 at ppb1 bus 2
ral0 at pci2 dev 0 function 0 "Ralink RT2790" rev 0x00: apic 2 int 17 (irq 10),
address 00:21:85:ec:ba:e1
ral0: MAC/BBP RT2872 (rev 0x0200), RF RT2720 (MIMO 1T2R)
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2 int 23
(irq 5)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2 int 19
(irq 3)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2 int 18
(irq 7)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2 int 16
(irq 11)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2 int 23
(irq 5)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci3 at ppb2 bus 3
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA, channel
0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD1600BEVT-22ZCT0>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 2 int 19
(irq 3)
iic0 at ichiic0
spdmem0 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uvideo0 at uhub0 port 5 configuration 1 interface 0 "Bison Electronics Inc.
BisonCam, NB Pro" rev 2.00/0.03 addr 2
video0 at uvideo0
umass0 at uhub0 port 6 configuration 1 interface 0 "Generic USB2.0-CRW" rev
2.00/58.87 addr 3
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <Generic-, Multi-Card, 1.00> SCSI0 0/direct
removable
sd0: drive offline
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
