Hi guys.
I'm helping a friend install 4.4 (Sparc64) on this SunFire V120 he got for
free :) It's a very nice box with a working Solaris install. It boots the
install.iso and proceeds to install, but when we get to the point of
selecting a root disk... the only option we have is [done]. OpenBSD seems to
detect both drives (sd0 and sd1) but not place them in the list to select
from.
My friend heard that I got OpenBSD setup on an older, similar Netra T105 so
he thought I was an OpenBSD magician and could fix his issue... I am not a
magician, just persistent and love using OpenBSD and not afraid to ask the
experts here. I do installs on these devices very seldom... that is part of
the porblem. You guys need to make a less reliable OS so that I can more
practice re-installing ;)
Here is the dmesg we see (sorry for the spaces... had to cut and paste it
from a Hyper Terminal Window)... any advice will be much appreciated:
Box = Sunfire v120
console is /p...@1f,0/p...@1,1/i...@7/ser...@0,3f8
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2008 OpenBSD. All rights reserved.
http://www.OpenBSD.org
OpenBSD 4.4 (RAMDISK) #379: Mon Aug 11 18:30:02 MDT 2008
[email protected]:/usr/src/sys/arch/sparc64/compile/RAMDISK
real mem = 1073741824 (1024MB)
avail mem = 1030004736 (982MB)
mainbus0 at root: Sun Fire V120 (UltraSPARC-IIe 648MHz)
cpu0 at mainbus0: SUNW,UltraSPARC-IIe (rev 3.3) @ 648 MHz
cpu0: physical 16K instruction (32 b/l), 16K data (32 b/l), 512K external
(64 b/
l)
psycho0 at mainbus0: SUNW,sabre, impl 0, version 0, ign 7c0
psycho0: bus range 0-2, PCI bus 0
psycho0: dvma map c0000000-dfffffff, iotdb 126c000-12ec000
pci0 at psycho0
ppb0 at pci0 dev 1 function 1 "Sun Simba PCI-PCI" rev 0x13
pci1 at ppb0 bus 1
ebus0 at pci1 dev 12 function 0 "Sun RIO EBus" rev 0x01
"flashprom" at ebus0 addr 0-fffff not configured
clock1 at ebus0 addr 0-1fff: mk48t59
"SUNW,lomh" at ebus0 addr 200000-200003 ivec 0x2a not configured
"Acer Labs M7101 Power" rev 0x00 at pci1 dev 3 function 0 not configured
ebus1 at pci1 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00
"power" at ebus1 addr 800-82f ivec 0x25 not configured
com0 at ebus1 addr 3f8-3ff ivec 0x2b: ns16550a, 16 byte fifo
com0: console
com1 at ebus1 addr 2e8-2ef ivec 0x2b: ns16550a, 16 byte fifo
gem0 at pci1 dev 12 function 1 "Sun ERI Ether" rev 0x01: ivec 0x7c6, address
00:
03:ba:27:1f:61
ukphy0 at gem0 phy 1: Generic IEEE 802.3u media interface, rev. 1: OUI
0x0010dd,
model 0x0002
ohci0 at pci1 dev 12 function 3 "Sun USB" rev 0x01: ivec 0x7e4, version 1.0,
leg
acy support
pciide0 at pci1 dev 13 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc3: DMA,
chan
nel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using ivec 0x7cc for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, P.9A> ATAPI 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 disabled (no drives)
gem1 at pci1 dev 5 function 1 "Sun ERI Ether" rev 0x01: ivec 0x7dc, address
00:0
3:ba:27:1f:62
ukphy1 at gem1 phy 1: Generic IEEE 802.3u media interface, rev. 1: OUI
0x0010dd,
model 0x0002
ohci1 at pci1 dev 5 function 3 "Sun USB" rev 0x01: ivec 0x7e6, version 1.0,
lega
cy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "Sun OHCI root hub" rev 1.00/1.00 addr 1
usb1 at ohci1: USB revision 1.0
uhub1 at usb1 "Sun OHCI root hub" rev 1.00/1.00 addr 1
ppb1 at pci0 dev 1 function 0 "Sun Simba PCI-PCI" rev 0x13
pci2 at ppb1 bus 2
siop0 at pci2 dev 8 function 0 "Symbios Logic 53c896" rev 0x07: ivec 0x7e0,
usin
g 8K of on-board RAM
scsibus1 at siop0: 16 targets, initiator 7
sd0 at scsibus1 targ 0 lun 0: <SEAGATE, ST336706LC, 8A03> SCSI3 0/direct
fixed
sd0: 34732MB, 26302 cyl, 4 head, 676 sec, 512 bytes/sec, 71132959 sec total
sd1 at scsibus1 targ 1 lun 0: <SEAGATE, ST336605LC, 2203> SCSI3 0/direct
fixed
sd1: 34732MB, 29550 cyl, 4 head, 601 sec, 512 bytes/sec, 71132959 sec total
siop1 at pci2 dev 8 function 1 "Symbios Logic 53c896" rev 0x07: ivec 0x7e0,
usin
g 8K of on-board RAM
scsibus2 at siop1: 16 targets, initiator 7
rd0: fixed, 6144 blocks
bootpath: /p...@1f,0/p...@1,1/i...@d,0/cd...@0,0:f
root on rd0a swap on rd0b dump on rd0b
console is /p...@1f,0/p...@1,1/i...@7/ser...@0,3f8
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2008 OpenBSD. All rights reserved.
http://www.OpenBSD.org
OpenBSD 4.4 (RAMDISK) #379: Mon Aug 11 18:30:02 MDT 2008
[email protected]:/usr/src/sys/arch/sparc64/compile/RAMDISK
real mem = 1073741824 (1024MB)
avail mem = 1030004736 (982MB)
mainbus0 at root: Sun Fire V120 (UltraSPARC-IIe 648MHz)
cpu0 at mainbus0: SUNW,UltraSPARC-IIe (rev 3.3) @ 648 MHz
cpu0: physical 16K instruction (32 b/l), 16K data (32 b/l), 512K external
(64 b/
l)
psycho0 at mainbus0: SUNW,sabre, impl 0, version 0, ign 7c0
psycho0: bus range 0-2, PCI bus 0
psycho0: dvma map c0000000-dfffffff, iotdb 126c000-12ec000
pci0 at psycho0
ppb0 at pci0 dev 1 function 1 "Sun Simba PCI-PCI" rev 0x13
pci1 at ppb0 bus 1
ebus0 at pci1 dev 12 function 0 "Sun RIO EBus" rev 0x01
"flashprom" at ebus0 addr 0-fffff not configured
clock1 at ebus0 addr 0-1fff: mk48t59
"SUNW,lomh" at ebus0 addr 200000-200003 ivec 0x2a not configured
"Acer Labs M7101 Power" rev 0x00 at pci1 dev 3 function 0 not configured
ebus1 at pci1 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00
"power" at ebus1 addr 800-82f ivec 0x25 not configured
com0 at ebus1 addr 3f8-3ff ivec 0x2b: ns16550a, 16 byte fifo
com0: console
com1 at ebus1 addr 2e8-2ef ivec 0x2b: ns16550a, 16 byte fifo
gem0 at pci1 dev 12 function 1 "Sun ERI Ether" rev 0x01: ivec 0x7c6, address
00:
03:ba:27:1f:61
ukphy0 at gem0 phy 1: Generic IEEE 802.3u media interface, rev. 1: OUI
0x0010dd,
model 0x0002
ohci0 at pci1 dev 12 function 3 "Sun USB" rev 0x01: ivec 0x7e4, version 1.0,
leg
acy support
pciide0 at pci1 dev 13 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc3: DMA,
chan
nel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using ivec 0x7cc for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, P.9A> ATAPI 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 disabled (no drives)
gem1 at pci1 dev 5 function 1 "Sun ERI Ether" rev 0x01: ivec 0x7dc, address
00:0
3:ba:27:1f:62
ukphy1 at gem1 phy 1: Generic IEEE 802.3u media interface, rev. 1: OUI
0x0010dd,
model 0x0002
ohci1 at pci1 dev 5 function 3 "Sun USB" rev 0x01: ivec 0x7e6, version 1.0,
lega
cy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "Sun OHCI root hub" rev 1.00/1.00 addr 1
usb1 at ohci1: USB revision 1.0
uhub1 at usb1 "Sun OHCI root hub" rev 1.00/1.00 addr 1
ppb1 at pci0 dev 1 function 0 "Sun Simba PCI-PCI" rev 0x13
pci2 at ppb1 bus 2
siop0 at pci2 dev 8 function 0 "Symbios Logic 53c896" rev 0x07: ivec 0x7e0,
usin
g 8K of on-board RAM
scsibus1 at siop0: 16 targets, initiator 7
sd0 at scsibus1 targ 0 lun 0: <SEAGATE, ST336706LC, 8A03> SCSI3 0/direct
fixed
sd0: 34732MB, 26302 cyl, 4 head, 676 sec, 512 bytes/sec, 71132959 sec total
sd1 at scsibus1 targ 1 lun 0: <SEAGATE, ST336605LC, 2203> SCSI3 0/direct
fixed
sd1: 34732MB, 29550 cyl, 4 head, 601 sec, 512 bytes/sec, 71132959 sec total
siop1 at pci2 dev 8 function 1 "Symbios Logic 53c896" rev 0x07: ivec 0x7e0,
usin
g 8K of on-board RAM
scsibus2 at siop1: 16 targets, initiator 7
rd0: fixed, 6144 blocks
bootpath: /p...@1f,0/p...@1,1/i...@d,0/cd...@0,0:f
root on rd0a swap on rd0b dump on rd0b
--
View this message in context:
http://www.nabble.com/Install-4.4-Sparc64-on-SunFire-V120-tp22210882p22210882.html
Sent from the openbsd user - misc mailing list archive at Nabble.com.
