Hello misc@,
I'm having some strange problems with the symon (mon+mux) and rrdtool
packages after recently upgrading to a 4.4 snapshot (fresh install).
Previously I was running 4.3 with symon & symux installed, and would
cron a script that created rrdtool graphs from some of the symux rrd
files, similar to what syweb does (only from cron).
After the upgrade, any attempt to fetch info from some of the rrd
files (even. via a "rrdtool fetch <rrdname> CF") created & updated by
symux results in either a segfault or the following error from
rrdtool:
ERROR: fetching cdp from rra
Same if I try to graph any of those files.
The only rrds that I can fetch info from, and graph, are the mbuf,
mem, and pf rrds.
I've re-created the rrds a dozen times, always from the provided
c_smrrds.sh script. Symux reports no errors while running, and seems
to be updating all of the rrds. On all of them, I can run
rrdtool last <rrdname>
without error, and see that it was updated within the last 5 seconds.
I've been trying to track down the error, but so far have had no luck.
Any ideas or a clue-stick-smacks would be greatly appreciated.
Many Thanks,
-ryan
OpenBSD 4.4-current (GENERIC.MP) #1959: Mon Nov 3 12:17:11 MST 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2133671936 (2034MB)
avail mem = 2071810048 (1975MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0x7ffbc000 (62 entries)
bios0: vendor Dell Inc. version "1.2.0" date 10/18/2006
bios0: Dell Inc. PowerEdge 2900
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP APIC SPCR HPET MCFG
acpi0: wakeup devices PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz, 1995.25 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,CX16,xTPR,NXE,LONG
cpu0: 4MB 64b/line 16-way L2 cache
cpu0: apic clock running at 332MHz
cpu1 at mainbus0: apid 6 (application processor)
cpu1: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz, 1995.00 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,CX16,xTPR,NXE,LONG
cpu1: 4MB 64b/line 16-way L2 cache
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz, 1995.00 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,CX16,xTPR,NXE,LONG
cpu2: 4MB 64b/line 16-way L2 cache
cpu3 at mainbus0: apid 7 (application processor)
cpu3: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz, 1995.00 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,CX16,xTPR,NXE,LONG
cpu3: 4MB 64b/line 16-way L2 cache
ioapic0 at mainbus0 apid 8 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
ioapic1 at mainbus0 apid 9 pa 0xfec80000, version 20, 24 pins
ioapic1: misconfigured as apic 0, remapped to apid 9
ioapic2 at mainbus0 apid 10 pa 0xfec83000, version 20, 24 pins
ioapic2: misconfigured as apic 0, remapped to apid 10
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 6 (PEX2)
acpiprt2 at acpi0: bus 7 (UPST)
acpiprt3 at acpi0: bus 8 (DWN1)
acpiprt4 at acpi0: bus 10 (DWN2)
acpiprt5 at acpi0: bus 11 (PE2X)
acpiprt6 at acpi0: bus 12 (PEX3)
acpiprt7 at acpi0: bus 13 (PEX4)
acpiprt8 at acpi0: bus 1 (PEX5)
acpiprt9 at acpi0: bus 2 (PE2P)
acpiprt10 at acpi0: bus 14 (PEX6)
acpiprt11 at acpi0: bus 4 (SBEX)
acpiprt12 at acpi0: bus 16 (COMP)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpicpu2 at acpi0
acpicpu3 at acpi0
ipmi at mainbus0 not configured
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "Intel 5000X Host" rev 0x12
ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE" rev 0x12
pci1 at ppb0 bus 6
ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci2 at ppb1 bus 7
ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci3 at ppb2 bus 8
ppb3 at pci3 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc2
pci4 at ppb3 bus 9
bnx0 at pci4 dev 0 function 0 "Broadcom BCM5708" rev 0x11: apic 8 int 16 (irq 5)
ppb4 at pci2 dev 1 function 0 "Intel 6321ESB PCIE" rev 0x01: apic 8
int 16 (irq 0)
pci5 at ppb4 bus 10
ppb5 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01
pci6 at ppb5 bus 11
em0 at pci6 dev 1 function 0 "Intel PRO/1000GT (82541GI)" rev 0x05:
apic 9 int 0 (irq 5), address 00:1b:21:0a:06:41
ral0 at pci6 dev 2 function 0 "Ralink RT2561S" rev 0x00: apic 9 int 4
(irq 5), address 00:0e:2e:8d:26:66
ral0: MAC/BBP RT2561C, RF RT2527
ppb6 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0x12: apic 8 int 16 (irq 0)
pci7 at ppb6 bus 12
ppb7 at pci0 dev 4 function 0 "Intel 5000 PCIE" rev 0x12: apic 8 int 16 (irq 0)
pci8 at ppb7 bus 13
ppb8 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0x12
pci9 at ppb8 bus 1
ppb9 at pci9 dev 0 function 0 "Intel IOP333 PCIE-PCIX" rev 0x00
pci10 at ppb9 bus 2
mfi0 at pci10 dev 14 function 0 "Dell PERC 5" rev 0x00: apic 10 int 14
(irq 6), 0x1f031028
mfi0: logical drives 5, version 5.0.2-0003, 256MB RAM
scsibus0 at mfi0: 5 targets, initiator 64
sd0 at scsibus0 targ 0 lun 0: <DELL, PERC 5/i, 1.00> SCSI3 0/direct fixed
sd0: 75776MB, 512 bytes/sec, 155189248 sec total
sd1 at scsibus0 targ 1 lun 0: <DELL, PERC 5/i, 1.00> SCSI3 0/direct fixed
sd1: 152064MB, 512 bytes/sec, 311427072 sec total
sd2 at scsibus0 targ 2 lun 0: <DELL, PERC 5/i, 1.00> SCSI3 0/direct fixed
sd2: 152064MB, 512 bytes/sec, 311427072 sec total
sd3 at scsibus0 targ 3 lun 0: <DELL, PERC 5/i, 1.00> SCSI3 0/direct fixed
sd3: 152064MB, 512 bytes/sec, 311427072 sec total
sd4 at scsibus0 targ 4 lun 0: <DELL, PERC 5/i, 1.00> SCSI3 0/direct fixed
sd4: 152064MB, 512 bytes/sec, 311427072 sec total
ppb10 at pci9 dev 0 function 2 "Intel IOP333 PCIE-PCIX" rev 0x00
pci11 at ppb10 bus 3
ppb11 at pci0 dev 6 function 0 "Intel 5000 PCIE x8" rev 0x12: apic 8
int 16 (irq 0)
pci12 at ppb11 bus 14
ppb12 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0x12
pci13 at ppb12 bus 15
pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0x12
pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0x12
pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0x12
pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0x12
pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0x12
pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0x12
pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0x12
ppb13 at pci0 dev 28 function 0 "Intel 6321ESB PCIE" rev 0x09
pci14 at ppb13 bus 4
ppb14 at pci14 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc2
pci15 at ppb14 bus 5
bnx1 at pci15 dev 0 function 0 "Broadcom BCM5708" rev 0x11: apic 8 int
16 (irq 5)
uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: apic 8
int 21 (irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: apic 8
int 20 (irq 10)
uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: apic 8
int 21 (irq 11)
uhci3 at pci0 dev 29 function 3 "Intel 6321ESB USB" rev 0x09: apic 8
int 20 (irq 10)
ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: apic 8
int 21 (irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb15 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xd9
pci16 at ppb15 bus 16
vga1 at pci16 dev 13 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
radeondrm0 at vga1
pcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09
pciide0 at pci0 dev 31 function 1 "Intel 6321ESB IDE" rev 0x09: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus1 targ 0 lun 0: <LITE-ON, CD-ROM LTN-4891S, NDS3> ATAPI
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
uhub5 at uhub0 port 7 "Cypress Semiconductor USB2 Hub" rev 2.00/0.0b addr 2
uhidev0 at uhub2 port 1 configuration 1 interface 0 "Sun Microsystems
Type 6 Keyboard" rev 1.00/1.02 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes, layout 33
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub2 port 2 configuration 1 interface 0 "Sun Microsystems
Type 6 Mouse" rev 1.00/1.02 addr 3
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons
wsmouse0 at ums0 mux 0
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
bnx1: address 00:18:8b:44:0f:87
brgphy0 at bnx1 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 5
bnx0: address 00:18:8b:44:0f:89
brgphy1 at bnx0 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 5
