Finally here is the dmesg
OpenBSD 4.3 (RAMDISK_CD) #645: Wed Mar 12 11:31:03 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz ("GenuineIntel" 686-class) 2
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
CF
LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,C
X16,xTPR
real mem = 3220541440 (3071MB)
avail mem = 3122683904 (2978MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 02/08/08, BIOS32 rev. 0 @ 0xfd841,
SMBIOS rev. 2.4 @
0xbffcee80 (86 entries)
bios0: vendor IBM version "-[GFE136BUS-1.09]-" date 02/08/2008
bios0: IBM IBM System x3550 -[7978B1U]-
acpi0 at bios0: rev 2, can't enable ACPI
bios0: ROM list: 0xc0000/0xb000 0xcb000/0x1800 0xcc800/0x1800
0xce000/0x5000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 5000X Host" rev 0x31
ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE x8" rev 0x31
pci1 at ppb0 bus 16
ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci2 at ppb1 bus 17
ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci3 at ppb2 bus 19
ppb3 at pci2 dev 1 function 0 "Intel 6321ESB PCIE" rev 0x01
pci4 at ppb3 bus 18
ppb4 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01
pci5 at ppb4 bus 20
ppb5 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0x31
pci6 at ppb5 bus 35
ppb6 at pci0 dev 4 function 0 "Intel 5000 PCIE x8" rev 0x31
pci7 at ppb6 bus 7
ppb7 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0x31
pci8 at ppb7 bus 34
ppb8 at pci0 dev 6 function 0 "Intel 5000 PCIE" rev 0x31
pci9 at ppb8 bus 3
ppb9 at pci9 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci10 at ppb9 bus 4
bnx0 at pci10 dev 0 function 0 "Broadcom BCM5708" rev 0x12: irq 7
ppb10 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0x31
pci11 at ppb10 bus 2
"Adaptec ASR-2120S" rev 0x02 at pci11 dev 0 function 0 not configured
"Intel 5000 DMA" rev 0x31 at pci0 dev 8 function 0 not configured
pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0x31
pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0x31
pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0x31
pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0x31
pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0x31
pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0x31
pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0x31
ppb11 at pci0 dev 28 function 0 "Intel 6321ESB PCIE" rev 0x09
pci12 at ppb11 bus 5
ppb12 at pci12 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci13 at ppb12 bus 6
bnx1 at pci13 dev 0 function 0 "Broadcom BCM5708" rev 0x12: irq 3
uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: irq 5
uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: irq 11
uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: irq 5
ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: irq 5
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb13 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xd9
pci14 at ppb13 bus 1
vga1 at pci14 dev 1 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09: PM
disabled
pciide0 at pci0 dev 31 function 1 "Intel 6321ESB IDE" rev 0x09: DMA,
channel 0 c onfigured to
compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, RW/DVD GCC-T10N, 1.00> SCSI0
5/cdrom re movable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
"Intel 6321ESB SMBus" rev 0x09 at pci0 dev 31 function 3 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
biomask ff65 netmask ffed ttymask ffef
rd0: fixed, 3800 blocks
uhidev0 at uhub1 port 1 configuration 1 interface 0 "vendor 0x04b3 USB
Optical M ouse" rev
2.00/2.00 addr 2
uhidev0: iclass 3/1
uhid at uhidev0 not configured
uhidev1 at uhub1 port 2 configuration 1 interface 0 " USB Keyboard" rev
1.10/2.8 0 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub1 port 2 configuration 1 interface 1 " USB Keyboard" rev
1.10/2.8 0 addr 3
uhidev2: iclass 3/0, 2 report ids
uhid at uhidev2 reportid 1 not configured
uhid at uhidev2 reportid 2 not configured
root on rd0a swap on rd0b dump on rd0b
bnx1: address 00:1a:64:79:f1:5a
brgphy0 at bnx1 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
bnx0: address 00:1a:64:79:f1:58
brgphy1 at bnx0 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
-----Mensagem original-----
De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Em nome de
Ricardo Augusto de Souza
Enviada em: quinta-feira, 23 de outubro de 2008 16:34
Para: Marcin; [email protected]
Assunto: RES: OpenBSD on IBM System X3550 7879
What do u mean with mini menu after post?
I created RAID using IBM ServerGuide 7.4.13
I also tested with no RAID.. it also failed.
-----Mensagem original-----
De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Em nome de
Marcin
Enviada em: quinta-feira, 23 de outubro de 2008 15:50
Para: [email protected]
Assunto: Re: OpenBSD on IBM System X3550 7879
2008/10/23 John Nietzsche <[EMAIL PROTECTED]>:
> I have tried on an IBM server, but could not get it working. If you
> succed, let me know.
>
> I believe raid controller is not supported.
>
Hello,
I'm not sure if this could be of any help, but I had very similar
problems with installation of Linux, until I found out that you HAVE
TO create raid array or the controller won't expose drives to the OS.
I expected it to work in a kind of "pass-through" mode by default,
when you can access drives from the OS, but this wasn't the case.
So, please make sure you have created a RAID using mini menu after
POST, before you start OpenBSD installation process
Regards,
--
Marcin
