Greetings,
I pooched an attempted upgrade of a 4.3 box to 4.4 which I remembered
was running the modified RAIDFrame kernel after installing the -release
kernel and rebooting -- whoops. I managed to recover the box, but it
won't mount the raid0a slice on root. I resurrected the raid0 slice,
reran 'raidctl -A root raid0' and rebooted, but when the system tries to
mount /dev/raid0a on root it says 'invalid argument'. I'm currently
running with / mounted off wd0a (which is why the raidctl -vs below
shows "Root partition: No") . Any suggestions (aside from start from
scratch)?
Here's a copy of some pertinent info:
#cat /etc/raid0.conf
----Begin----
START array
# rows (must be 1), columns, spare disk
1 2 0
START disks
/dev/wd0d
/dev/wd1d
START layout
# sectPerSU SUsPerParityUnit SUsPerReconUnit RAID_level
128 1 1 1
START queue
# queue mode, outstanding request count
fifo 100
----End----
#raidctl -vs raid0
raid0 Components:
/dev/wd0d: optimal
/dev/wd1d: optimal
No spares.
Component label for /dev/wd0d:
Row: 0, Column: 0, Num Rows: 1, Num Columns: 2
Version: 2, Serial Number: 2008020500, Mod Counter: 299
Clean: No, Status: 0
sectPerSU: 128, SUsPerPU: 1, SUsPerRU: 1
Queue size: 100, blocksize: 512, numBlocks: 780357248
RAID Level: 1
Autoconfig: Yes
Root partition: No
Last configured as: raid0
Component label for /dev/wd1d:
Row: 0, Column: 1, Num Rows: 1, Num Columns: 2
Version: 2, Serial Number: 2008020500, Mod Counter: 299
Clean: No, Status: 0
sectPerSU: 128, SUsPerPU: 1, SUsPerRU: 1
Queue size: 100, blocksize: 512, numBlocks: 780357248
RAID Level: 1
Autoconfig: Yes
Root partition: No
Last configured as: raid0
Parity status: clean
Reconstruction is 100% complete.
Parity Re-write is 100% complete.
Copyback is 100% complete.
-Steve S.
