On Tue, Jun 17, 2008 at 04:13:47PM -0400, Paul Barbeau wrote:
> > Please send the dmesg from the boot disk/cd.
>
> Here is the dmesg from the boot.
There are no wd* or sd* devices listed here so there are no disks
available to the system.
> "Intel 6321ESB RAID" rev 0x09 at pci0 dev 31 function 2 not configured
If this is the device you expect to provide disks, the only obvious
candidate I see, it is not currently supported in the RAMDISK_CD
kernel if at all.
.... Ken
>
> OpenBSD 4.3 (RAMDISK_CD) #645: Wed Mar 12 11:31:03 MDT 2008
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
> RTC BIOS diagnostic error 3
> cpu0: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
> CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2
> ,CX16,xTPR
> real mem = 2656858112 (2533MB)
> avail mem = 2567671808 (2448MB)
> RTC BIOS diagnostic error 3
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 03/26/07, SMBIOS rev. 2.5 @ 0x9fa32000
> (70 entries)
> bios0: vendor Intel Corporation version
> "S5000.86B.10.00.0088.031420081550" date 03/14/2008
> bios0: Intel S5000XVN
> acpi0 at bios0: rev 0, can't enable ACPI
> bios0: ROM list: 0xc0000/0xde00 0xce000/0x5600! 0xd3800/0x1000
> 0xd4800/0x1000 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1
> (no bios) pchb0 at pci0 dev 0 function 0 "Intel 5000X Host" rev 0x31 ppb0 at
> pci0 dev 2 function 0 "Intel 5000 PCIE x8" rev 0x31
> pci1 at ppb0 bus 1
> ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
> pci2 at ppb1 bus 2
> ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
> pci3 at ppb2 bus 3
> ppb3 at pci2 dev 2 function 0 "Intel 6321ESB PCIE" rev 0x01
> pci4 at ppb3 bus 4
> em0 at pci4 dev 0 function 0 "Intel PRO/1000 PT (80003ES2)" rev 0x01:
> irq 10, address 00:15:17:5a:7e:08
> em1 at pci4 dev 0 function 1 "Intel PRO/1000 PT (80003ES2)" rev 0x01:
> irq 5, address 00:15:17:5a:7e:09
> ppb4 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01
> pci5 at ppb4 bus 5
> ppb5 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0x31
> pci6 at ppb5 bus 6
> ppb6 at pci0 dev 4 function 0 "Intel 5000 PCIE x16" rev 0x31
> pci7 at ppb6 bus 7
> vga1 at pci7 dev 0 function 0 "NVIDIA GeForce 7300 GT" rev 0xa1 wsdisplay0
> at vga1 mux 1: console (80x25, vt100 emulation)
> ppb7 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0x31
> pci8 at ppb7 bus 8
> ppb8 at pci0 dev 6 function 0 "Intel 5000 PCIE" rev 0x31
> pci9 at ppb8 bus 9
> ppb9 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0x31 pci10 at ppb9 bus
> 10 "Intel 5000 DMA" rev 0x31 at pci0 dev 8 function 0 not configured
> pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0x31
> pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0x31
> pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0x31
> pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0x31
> pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0x31
> pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0x31
> pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0x31 ppb10 at pci0 dev
> 28 function 0 "Intel 6321ESB PCIE" rev 0x09: irq 11
> pci11 at ppb10 bus 11
> uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: irq 5
> uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: irq 10
> uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: irq 5
> uhci3 at pci0 dev 29 function 3 "Intel 6321ESB USB" rev 0x09: irq 10 ehci0
> at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: irq 5 usb0 at ehci0:
> USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb11 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xd9
> pci12 at ppb11 bus 12
> ichpcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09: PM disabled
> pciide0 at pci0 dev 31 function 1 "Intel 6321ESB IDE" rev 0x09: DMA, channel
> 0 configured to compatibility, channel 1 configured to compatibility
> atapiscsi0 at pciide0 channel 0 drive 1 scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <LITE-ON, COMBO SOHC-5232K, NK0G> SCSI0
> 5/cdrom removable
> cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
> pciide0: channel 1 disabled (no drives)
> "Intel 6321ESB RAID" rev 0x09 at pci0 dev 31 function 2 not configured
> "Intel 6321ESB SMBus" rev 0x09 at pci0 dev 31 function 3 not configured
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci3: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at ichpcib0
> isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0 npx0 at isa0 port
> 0xf0/16: reported by CPUID; using exception 16 biomask f7fd netmask f7fd
> ttymask ffff
> rd0: fixed, 3800 blocks
> root on rd0a swap on rd0b dump on rd0b
