On Wed, May 14, 2008 at 10:34:24AM -0700, D. Adam Karim wrote: > By chance did you read this: > > http://www.openbsd.org/faq/upgrade43.html#etcUpgrade > Of course.
> If you just blindly did a `tar xzf -C / etc43.tgz` without following > instructions, then it surely would have overwritten what you had added > to the file. > I did not do that. If I wanted to do that, I would have done an install, not an upgrade. I did not replace my /etc/gettytab. > Also note, /etc/gettytab is the file which handles this. Here is the > relavent section: > > default:\ > :np:im=\r\n%s/%m (%h) (%t)\r\n\r\n:sp#1200:cl=\E[H\E[2J: > But the FAQ says to put the "cl=\E[H\E[2J" in the "P|Pc|Pc" entry. Does this really belong in default? I did try your suggestion, though, and it works. If it really belongs in default then the FAQ needs a correction. -- Mark > D. Adam Karim > > On Wed, May 14, 2008 at 08:50:35AM -0600, Mark Zimmerman wrote: > > Greetings: > > > > Following the procedure in FAQ 7.3. I had set up /etc/gettytab to > > clear the screen after logoff. After upgrading to 4.3, this no longer > > works. The Upgrade Guide mentions that /etc/ttys has changed; could > > this have had an impact on this? I would like to get this working > > again, so advice is welcome. > > > > -- Mark
