I had OpenBSD 4.2 Running on these blades, installed via PXE fine.
Seems though, in running the 4.3 pxeboot and kernel, it dies on trying
to send RARP packets out?
Anyone have some ideas on how to get this to install?
Boot sequence and then DMESG attached (with PS and TRACE) at the end.
===============================================
>> OpenBSD/i386 PXEBOOT 2.02
switching console to com0
>> OpenBSD/i386 PXEBOOT 2.02
com0: changing speed to 115200 baud in 5 seconds, change your terminal to match!
com0: 115200 baud
boot> boot tftp:/bsd
booting tftp:/bsd: 5913424+1004644 [52+306864+287943]=0x72a4d4
entry point at 0x200120
#
[ using 595232 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2008 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 4.3 (GENERIC) #698: Wed Mar 12 11:07:05 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1000MHz ("GenuineIntel" 686-class) 1 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF,EST,TM2
real mem = 1073287168 (1023MB)
avail mem = 1029779456 (982MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @
0xf0000, SMBIOS rev. 2.3 @ 0xec000 (29 entries)
bios0: vendor HP version "I07" date 06/10/2003
bios0: HP ProLiant BL10e G2
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP SPCR
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0
acpitz0 at acpi0: critical temperature 31 degC
acpibtn0 at acpi0: PBTN
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1800 0xe0000/0x8000!
cpu0 at mainbus0
cpu0: Enhanced SpeedStep 1000 MHz (1004 mV): speeds: 1000, 900, 800, 600 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks GCNB-LE Host" rev 0x32
pchb1 at pci0 dev 0 function 1 "ServerWorks GCNB-LE Host" rev 0x00
"Compaq Netelligent ASMC" rev 0x00 at pci0 dev 1 function 0 not configured
vga1 at pci0 dev 2 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
fxp0 at pci0 dev 3 function 0 "Intel 8255x" rev 0x08, i82559: irq 7,
address 00:0b:cd:d2:f0:b5
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
fxp1 at pci0 dev 4 function 0 "Intel 8255x" rev 0x08, i82559: irq 10,
address 00:0b:cd:d2:f0:b4
inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4
piixpm0 at pci0 dev 15 function 0 "ServerWorks CSB6" rev 0xa0: polling
iic0 at piixpm0
spdmem0 at iic0 addr 0x51: 512MB DDR SDRAM registered ECC PC2300CL2.5
spdmem1 at iic0 addr 0x52: 512MB DDR SDRAM registered ECC PC2100CL2.5
pciide0 at pci0 dev 15 function 1 "ServerWorks CSB6 RAID/IDE" rev 0xa0: DMA
wd0 at pciide0 channel 0 drive 0: <HITACHI_DK23FB-40>
wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
ohci0 at pci0 dev 15 function 2 "ServerWorks CSB6 USB" rev 0x05: irq
11, version 1.0, legacy support
pchb2 at pci0 dev 15 function 3 "ServerWorks GCLE-2 Host" rev 0x00
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "ServerWorks OHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask f965 netmask fde5 ttymask ffe7
mtrr: Pentium Pro MTRR support
softraid0 at root
PXE boot MAC address 00:0b:cd:d2:f0:b5, interface fxp0
nfs_boot: using interface fxp0, with revarp & bootparams
fxp0: error 5, could not read firmware fxp-d101ma
panic: revarp failed, error=51
Stopped at Debugger+0x4: leave
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
ddb> ps
PID PPID PGRP UID S FLAGS WAIT COMMAND
8 0 0 0 3 0x100200 pftm pfpurge
7 0 0 0 3 0x100200 usbtsk usbtask
6 0 0 0 3 0x100200 usbevt usb0
5 0 0 0 3 0x100200 acpi_idle acpi0
4 0 0 0 3 0x100200 bored syswq
3 0 0 0 3 0x100200 idle0
2 0 0 0 3 0x100200 kmalloc kmthread
1 0 0 0 3 0 initexec swapper
* 0 -1 0 0 7 0x80200 swapper
ddb> trace
Debugger(d1985040,d092cca4,d092ccd8,33,d092ccf0) at Debugger+0x4
panic(d06c4a90,33,d092ccf0,d07e9a60,a) at panic+0x63
nfs_boot_init(d092cdd0,d07e9a60,d05cedb2,d0799e4c,a) at nfs_boot_init+0x50
nfs_mountroot(0,d078a718,d092cfa0,d033e14d,d06a82f7) at nfs_mountroot+0x37
vfs_mountroot(d06a82f7,0,d06aec72,0) at vfs_mountroot+0x51
main(0,0,0,0,0) at main+0x4a9
ddb> dmesg
OpenBSD 4.3 (GENERIC) #698: Wed Mar 12 11:07:05 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1000MHz ("GenuineIntel" 686-class) 1 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,A
CPI,MMX,FXSR,SSE,SSE2,TM,SBF,EST,TM2
real mem = 1073287168 (1023MB)
avail mem = 1029779456 (982MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000, SMBIOS
rev. 2.3 @ 0xec000 (29 entries)
bios0: vendor HP version "I07" date 06/10/2003
bios0: HP ProLiant BL10e G2
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP SPCR
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0
acpitz0 at acpi0: critical temperature 31 degC
acpibtn0 at acpi0: PBTN
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1800 0xe0000/0x8000!
cpu0 at mainbus0
cpu0: Enhanced SpeedStep 1000 MHz (1004 mV): speeds: 1000, 900, 800, 600 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks GCNB-LE Host" rev 0x32
pchb1 at pci0 dev 0 function 1 "ServerWorks GCNB-LE Host" rev 0x00
"Compaq Netelligent ASMC" rev 0x00 at pci0 dev 1 function 0 not configured
vga1 at pci0 dev 2 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
fxp0 at pci0 dev 3 function 0 "Intel 8255x" rev 0x08, i82559: irq 7, address 00
:0b:cd:d2:f0:b5
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
fxp1 at pci0 dev 4 function 0 "Intel 8255x" rev 0x08, i82559: irq 10, address 0
0:0b:cd:d2:f0:b4
inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4
piixpm0 at pci0 dev 15 function 0 "ServerWorks CSB6" rev 0xa0: polling
iic0 at piixpm0
spdmem0 at iic0 addr 0x51: 512MB DDR SDRAM registered ECC PC2300CL2.5
spdmem1 at iic0 addr 0x52: 512MB DDR SDRAM registered ECC PC2100CL2.5
pciide0 at pci0 dev 15 function 1 "ServerWorks CSB6 RAID/IDE" rev 0xa0: DMA
wd0 at pciide0 channel 0 drive 0: <HITACHI_DK23FB-40>
wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
ohci0 at pci0 dev 15 function 2 "ServerWorks CSB6 USB" rev 0x05: irq 11, versio
n 1.0, legacy support
pchb2 at pci0 dev 15 function 3 "ServerWorks GCLE-2 Host" rev 0x00
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "ServerWorks OHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask f965 netmask fde5 ttymask ffe7
mtrr: Pentium Pro MTRR support
softraid0 at root
PXE boot MAC address 00:0b:cd:d2:f0:b5, interface fxp0
nfs_boot: using interface fxp0, with revarp & bootparams
fxp0: error 5, could not read firmware fxp-d101ma
panic: revarp failed, error=51
Stopped at Debugger+0x4: leave
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
ddb>
PID PPID PGRP UID S FLAGS WAIT COMMAND
8 0 0 0 3 0x100200 pftm pfpurge
7 0 0 0 3 0x100200 usbtsk usbtask
6 0 0 0 3 0x100200 usbevt usb0
5 0 0 0 3 0x100200 acpi_idle acpi0
4 0 0 0 3 0x100200 bored syswq
3 0 0 0 3 0x100200 idle0
2 0 0 0 3 0x100200 kmalloc kmthread
1 0 0 0 3 0 initexec swapper
* 0 -1 0 0 7 0x80200 swapper
ddb>
Debugger(d1985040,d092cca4,d092ccd8,33,d092ccf0) at Debugger+0x4
panic(d06c4a90,33,d092ccf0,d07e9a60,a) at panic+0x63
nfs_boot_init(d092cdd0,d07e9a60,d05cedb2,d0799e4c,a) at nfs_boot_init+0x50
nfs_mountroot(0,d078a718,d092cfa0,d033e14d,d06a82f7) at nfs_mountroot+0x37
vfs_mountroot(d06a82f7,0,d06aec72,0) at vfs_mountroot+0x51
main(0,0,0,0,0) at main+0x4a9
