On Sun, Apr 20, 2008 at 8:37 PM, Benoit Chesneau <[EMAIL PROTECTED]> wrote: > Hi all, > > When I use GENERIC.SMP on my machine (AMD Athlon(tm) 64 X2 Dual Core > Processor 4400+, asus M2N-MX) i have problem with smp, all usb ports > except teh one with the mouse are disabled , so is the hub on my apple > cinema display. At boot I get this message : > > usb1 at ohci0: USB revision 1.0 > uhub1 at usb1 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1 > ehci_sync_hc: tsleep() = 35 > ehci_sync_hc: tsleep() = 35 > ehci_sync_hc: tsleep() = 35 > ehci_sync_hc: tsleep() = 35 > ehci_sync_hc: tsleep() = 35 > ehci_sync_hc: tsleep() = 35 > ehci_sync_hc: tsleep() = 35 > ehci_sync_hc: tsleep() = 35 > ehci_sync_hc: tsleep() = 35 > ehci_sync_hc: tsleep() = 35 > ehci_sync_hc: tsleep() = 35 > uhub0: device problem, disabling port 2 > uhidev0 at uhub1 port 1 configuration 1 interface 0 "Razer Razer > Diamondback Optical Mouse" rev 2.00/1.00 addr 2 > uhidev0: iclass 3/1 > ums0 at uhidev0: 7 buttons and Z dir. > > It works well when I use GENERIC It might be an hardware problem since > I tested it with an ubuntu livecd and everything was ok (with smp). > However this problem appear after I changed my graphic card from a > nvidia 7100GS to a radeonhd RX2400 Pro. > > Any idee what could be the problem ? I suspect a problem with apic or > an irq conflict.. Dmesg is attached. > > - benont > OpenBSD 4.3-current (GENERIC.MP) #1631: Tue Apr 15 15:40:39 MDT 2008 > [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 2146824192 (2047MB) > avail mem = 2073030656 (1976MB) > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf06f0 (60 entries) > bios0: vendor American Megatrends Inc. version "0907" date 09/27/2007 > bios0: ASUSTeK Computer INC. M2N-MX > acpi0 at bios0: rev 2 > acpi0: tables DSDT FACP APIC MCFG OEMB HPET SSDT > acpi0: wakeup devices PS2K(S0) PS2M(S0) UAR1(S0) USB0(S0) USB2(S0) P0P1(S0) > HDAC(S0) P0P2(S0) BR11(S0) NMAC(S0) NSMB(S0) PWRB(S0) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+, 2310.98 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW > cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB > 64b/line 16-way L2 cache > cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative > cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative > cpu0: apic clock running at 200MHz > cpu1 at mainbus0: apid 1 (application processor) > cpu1: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+, 2310.65 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW > cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB > 64b/line 16-way L2 cache > cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative > cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative > ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 11, 24 pins > acpihpet0 at acpi0: 25000000 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (P0P1) > acpiprt2 at acpi0: bus 2 (P0P2) > acpiprt3 at acpi0: bus 3 (BR11) > acpiprt4 at acpi0: bus 4 (BR12) > acpicpu0 at acpi0: PSS > acpicpu1 at acpi0: PSS > acpibtn0 at acpi0: PWRB > cpu0: PowerNow! K8 2310 MHz: speeds: 2300 2200 2000 1800 1000 MHz > pci0 at mainbus0 bus 0: configuration mode 1 > "NVIDIA MCP61 Memory" rev 0xa1 at pci0 dev 0 function 0 not configured > pcib0 at pci0 dev 1 function 0 "NVIDIA MCP61 ISA" rev 0xa2 > nviic0 at pci0 dev 1 function 1 "NVIDIA MCP61 SMBus" rev 0xa2 > iic0 at nviic0 > spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 > spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-5300CL5 > iic1 at nviic0 > "NVIDIA MCP61 Memory" rev 0xa2 at pci0 dev 1 function 2 not configured > ohci0 at pci0 dev 2 function 0 "NVIDIA MCP61 USB" rev 0xa2: apic 2 int 11 > (irq 11), version 1.0, legacy support > ehci0 at pci0 dev 2 function 1 "NVIDIA MPC61 USB" rev 0xa2: apic 2 int 10 > (irq 10) > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "NVIDIA EHCI root hub" rev 2.00/1.00 addr 1 > ppb0 at pci0 dev 4 function 0 "NVIDIA MCP61" rev 0xa1 > pci1 at ppb0 bus 1 > emu0 at pci1 dev 7 function 0 "Creative Labs SoundBlaster Live" rev 0x0a: > apic 2 int 11 (irq 11) > ac97: codec id 0x83847658 (SigmaTel STAC9758/59) > ac97: codec features headphone, 20 bit DAC, 20 bit ADC, SigmaTel 3D > audio0 at emu0 > "Creative Labs PCI Gameport Joystick" rev 0x0a at pci1 dev 7 function 1 not > configured > azalia0 at pci0 dev 5 function 0 "NVIDIA MCP61 HD Audio" rev 0xa2: apic 2 > int 11 (irq 11) > azalia0: codec[s]: Analog Devices/0x1986 > audio1 at azalia0 > pciide0 at pci0 dev 6 function 0 "NVIDIA MCP61 IDE" rev 0xa2: DMA, channel 0 > configured to compatibility, channel 1 configured to compatibility > wd0 at pciide0 channel 0 drive 0: <MAXTOR STM3200820A> > wd0: 16-sector PIO, LBA48, 190782MB, 390721968 sectors > atapiscsi0 at pciide0 channel 0 drive 1 > scsibus0 at atapiscsi0: 2 targets > cd0 at scsibus0 targ 0 lun 0: <LITE-ON, DVDRW LH-20A1P, KL0G> SCSI0 5/cdrom > removable > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 > cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 4 > pciide0: channel 1 ignored (disabled) > nfe0 at pci0 dev 7 function 0 "NVIDIA MCP61 LAN" rev 0xa2: apic 2 int 11 > (irq 11), address 00:1b:fc:d9:a3:56 > ukphy0 at nfe0 phy 1: Generic IEEE 802.3u media interface, rev. 6: OUI > 0x001374, model 0x0001 > pciide1 at pci0 dev 8 function 0 "NVIDIA MCP61 SATA" rev 0xa2: DMA > pciide1: using apic 2 int 15 (irq 15) for native-PCI interrupt > wd1 at pciide1 channel 0 drive 0: <MAXTOR STM3160811AS> > wd1: 16-sector PIO, LBA48, 152627MB, 312581808 sectors > wd1(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 > pciide2 at pci0 dev 8 function 1 "NVIDIA MCP61 SATA" rev 0xa2: DMA > pciide2: using apic 2 int 5 (irq 5) for native-PCI interrupt > ppb1 at pci0 dev 9 function 0 "NVIDIA MCP61 PCIE" rev 0xa2 > pci2 at ppb1 bus 2 > vga1 at pci2 dev 0 function 0 "ATI Radeon HD 2400 Pro" rev 0x00 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > azalia1 at pci2 dev 0 function 1 "ATI RS690M HD Audio" rev 0x00: apic 2 int > 10 (irq 10) > azalia1: /usr/src/sys/dev/pci/azalia.c/1358 invalid PCM format: 0x00000000 > azalia1: No codecs found > ppb2 at pci0 dev 11 function 0 "NVIDIA MCP61 PCIE" rev 0xa2 > pci3 at ppb2 bus 3 > ppb3 at pci0 dev 12 function 0 "NVIDIA MCP61 PCIE" rev 0xa2 > pci4 at ppb3 bus 4 > pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00 > pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00 > pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00 > kate0 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00: core rev BH-G1 > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > midi0 at pcppi0: <PC speaker> > spkr0 at pcppi0 > lpt0 at isa0 port 0x378/4 irq 7 > it0 at isa0 port 0x2e/2: IT8712F rev 0x08, EC port 0x290 > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > usb1 at ohci0: USB revision 1.0 > uhub1 at usb1 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1 > ehci_sync_hc: tsleep() = 35 > ehci_sync_hc: tsleep() = 35 > ehci_sync_hc: tsleep() = 35 > ehci_sync_hc: tsleep() = 35 > ehci_sync_hc: tsleep() = 35 > ehci_sync_hc: tsleep() = 35 > ehci_sync_hc: tsleep() = 35 > ehci_sync_hc: tsleep() = 35 > ehci_sync_hc: tsleep() = 35 > ehci_sync_hc: tsleep() = 35 > ehci_sync_hc: tsleep() = 35 > uhub0: device problem, disabling port 2 > uhidev0 at uhub1 port 1 configuration 1 interface 0 "Razer Razer Diamondback > Optical Mouse" rev 2.00/1.00 addr 2 > uhidev0: iclass 3/1 > ums0 at uhidev0: 7 buttons and Z dir. > wsmouse0 at ums0 mux 0 > softraid0 at root > root on wd1a swap on wd1b dump on wd1b > >
I have seen that print on my apple macbook with amd64 GENERIC.MP as well. Usually it shows up in the first boot and then I don't see it anymore. I also see that in the boot where that messages shows usually the USB ports does not work. They will work if I reboot and don't get the message. I have been planning to take a look at it but haven't had time. Maybe I should see if I can find something. BR Karl
