Hi guys,
Yesterday I installed OpenBSD 4.3 release from CD. I copied both
PORTS_TA.GZ and SRC_TAR.GZ to /tmp. I extracted the ports to /usr/, and
while extracting src, I tried to make libsndfile in the ports tree. I
got "Abort trap". I tried other commands as well but I got the same.
Shell buildin commands just worked. I couldn't even halt my system, it
gave me the same error.
So, I turned my laptop off, and on, waited for 'that diskchecking
thing'. Finding an IP via DHCP seems te work, but after the "Starting
network"-line, I started getting the "Abort trap" error for ~10 times.
Also, the following line is comming again and again:
[date] init: can't exec getty '/usr/libexec/getty' for port
/dev/sttyC[012345]: Is a directory
(Uhm, I'm not sure if I'll try to fix this install. I think I'll do just
a fresh install instead. But let's just wait for yours commends)
Pieter Verberne
OpenBSD 4.3 (GENERIC) #698: Wed Mar 12 11:07:05 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz ("GenuineIntel"
686-class) 1.67 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
real mem = 1063677952 (1014MB)
avail mem = 1020465152 (973MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 04/18/07, BIOS32 rev. 0 @
0xfd690, SMBIOS rev. 2.4 @ 0xe0010 (68 entries)
bios0: vendor LENOVO version "7CETC6WW (2.16 )" date 04/18/2007
bios0: LENOVO 9456HTG
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG HPET SLIC BOOT SSDT
SSDT SSDT SSDT SSDT
acpi0: wakeup devices LID_(S3) SLPB(S3) LURT(S3) DURT(S3) EXP0(S4)
EXP1(S4) EXP2(S4) EXP3(S4) PCI1(S4) USB0(S3) USB1(S3) USB2(S3)
USB7(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (AGP_)
acpiprt2 at acpi0: bus 2 (EXP0)
acpiprt3 at acpi0: bus 3 (EXP1)
acpiprt4 at acpi0: bus 4 (EXP2)
acpiprt5 at acpi0: bus 12 (EXP3)
acpiprt6 at acpi0: bus 21 (PCI1)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, FVS, 1667, 1333, 1000 MHz
acpitz0 at acpi0: critical temperature 127 degC
acpitz1 at acpi0: critical temperature 98 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "42T4510" serial 35445 type LION oem
"SANYO"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit offline
acpidock at acpi0 not configured
bios0: ROM list: 0xc0000/0xea00! 0xdc000/0x4000! 0xe0000/0x10000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
agp0 at pchb0: aperture at 0xd0000000, size 0x10000000
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not
configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02:
irq 11
azalia0: RIRB time out
azalia0: codec[s]: Analog Devices/0x1981, 0x0000/0x0000, using
Analog Devices/0x1981
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: irq 11
pci1 at ppb0 bus 2
bge0 at pci1 dev 0 function 0 "Broadcom BCM5751M" rev 0x21, BCM5750
C1 (0x4201): irq 11, address 00:16:d3:b5:fd:30
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: irq 11
pci2 at ppb1 bus 3
wpi0 at pci2 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02:
irq 11, MoW2, address 00:1b:77:41:2f:59
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: irq 11
pci3 at ppb2 bus 4
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: irq 11
pci4 at ppb3 bus 12
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: irq 11
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: irq 11
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: irq 11
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: irq 11
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci5 at ppb4 bus 21
cbb0 at pci5 dev 0 function 0 "TI PCIXX12 CardBus" rev 0x00: irq 11
"TI PCIXX12 FireWire" rev 0x00 at pci5 dev 0 function 1 not
configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 22 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM
disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-850, RB11> SCSI0
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x02: irq
11, AHCI 1.1
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, HITACHI HTS54168, SB2I> SCSI3
0/direct fixed
sd0: 76319MB, 9729 cyl, 255 head, 63 sec, 512 bytes/sec, 156301488
sec total
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02:
irq 11
iic0 at ichiic0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask edfd netmask edfd ttymask ffff
mtrr: Pentium Pro MTRR support
ugen0 at uhub4 port 2 "STMicroelectronics Biometric Coprocessor" rev
1.00/0.01 addr 2
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
