After nfsen -r live disappear First key message:
Mar 14 14:05:00 netflow /usr/local/bin/nfcapd[2154]: Ident:
'boldsoft_railcom' Flows: 70290, Packets: 688865, Bytes: 293528363, Sequence
Errors: 0, Bad Packets: 0
Mar 14 14:05:00 netflow /usr/local/bin/nfcapd[2148]: Ident: 'boldsoft_voip'
Flows: 918, Packets: 23094, Bytes: 16605621, Sequence Errors: 0, Bad
Packets: 0
Mar 14 14:05:00 netflow /usr/local/bin/nfcapd[2145]: Ident: 'boldsoft_tower'
Flows: 11400, Packets: 93012, Bytes: 48901004, Sequence Errors: 0, Bad
Packets: 0
Mar 14 14:05:10 netflow /usr/local/bin/nfcapd[2151]: Ident: 'boldsoft_dial'
Flows: 734, Packets: 7264, Bytes: 3251532, Sequence Errors: 0, Bad Packets:
0
Mar 14 14:05:15 netflow nfsen[2575]: 0 channels/alerts to profile
Mar 14 14:05:15 netflow nfsen[2575]: Update profile live in group .
Mar 14 14:05:17 netflow nfsen[3325]: Plugin Cycle: Time: 200803141400,
Profile: live, Group: ., Module: PortTracker,
Mar 14 14:05:29 netflow nfsen[2575]: Run expire at Fri Mar 14 14:05:00 2008
Mar 14 14:05:29 netflow nfsen[2575]: End expire at Fri Mar 14 14:05:00 2008
Balgaa
Richard Daemon wrote:
>
> Hi,
>
> I'm really stumped on this and any help would be greatly appreciated.
>
> When trying to load the nfsen/nfsen.php page I get:
>
> ERROR: nfsend connect() error: No such file or directory!
> ERROR: nfsend - connection failed!!
> ERROR: Can not initialize globals!
>
> I'm sure I have it configured properly and started properly as the
> documentation states, I've read over and over and over again...
>
> I've used the default ./etc/nfsen-dist.conf > ./etc/nfsen.conf (tried
> with and without changing HTMLDIR)
>
> I'm running httpd -u (non-chroot), php enabled, configured in
> httpd.conf and tested ok - httpd chrooted works less, for now.
>
> I did the mkdir /data then ran the ./install.pl etc/nfsen.conf
>
> Started it with: ./nfsen start and it starts ok.
>
> in nfsen.conf I tried with /var/www/nfsen and /var/www/htdocs/nfsen
> (same results)...
>
> %sources = (
> #'upstream1' => { 'port' => '9995', 'col' => '#0000ff',
> 'type' => 'netflow' },
> 'slacker' => { 'port' => '9995', 'col' => '#0000ff', 'type'
> => 'netflow' },
> #'peer1' => { 'port' => '9996', 'col' => '#ff0000' },
> );
>
> Then when I try http://slacker/nfsen/nfsen.php I get:
>
> ERROR: nfsend connect() error: No such file or directory!
> ERROR: nfsend - connection failed!!
> ERROR: Can not initialize globals!in red.
>
> pfflowd -d -n 192.168.0.10 running from remote host.
>
> I tried 1.3 and 1.3b, including nfsen -r live.
>
> I also get this in /var/log/messages:
> Feb 16 22:50:15 slacker nfsen[689]: Error reading channel stat
> information. Missing key 'first'
>
> $ netstat -anf inet |grep 995
> udp 0 0 *.9995 *.*
>
> Running OpenBSD 4.2-stable.
>
> Did I miss anything? Am I doing something wrong?
>
> Any help is greatly appreciated!
>
>
>
--
View this message in context:
http://www.nabble.com/Nfsen-and-php-problems...--tp15526200p16045017.html
Sent from the openbsd user - misc mailing list archive at Nabble.com.
