On 08/03/2008, Ruan Kendall <[EMAIL PROTECTED]> wrote:
> So, I've tried both 4.2 and 4.3 snapshot on this slightly aged proliant I've
> obtained, and most things have worked very well but for the total
> absense of any sensor information.
>
> Is this because a) I've not done something terribly important that
> would enable it for me, b) because all the sensor stuff is hidden
> behind something like ACPI which isn't working on this machine or c)
> because there is no driver for the bit of hardware that handles all
> the sensor data?
>
> The various bits of server firmware and the bios have been updated to
> the most recent version, and the BIOS has been set up to boot as 'linux'.
>
> It currently looks like my only hope is to give up and use something
> like Centos 4 instead, but I'd rather not have to.
I totally agree that sensors is the most important part of the OS,
upon which OS selection should be made!
> Dmesg for a recent 4.3 snapshot. I also have MP and 4.2 dmesgs if
> they're likely to prove useful, which I assume they won't.
>
> ----------
>
> OpenBSD 4.3 (GENERIC) #695: Tue Mar 4 14:28:56 MST 2008
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Pentium(R) III CPU - S 1400MHz ("GenuineIntel"
> 686-class) 1.40 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
> real mem = 1341730816 (1279MB)
> avail mem = 1287774208 (1228MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @
> 0xf0000, SMBIOS rev. 2.3 @ 0xec000 (38 entries)
> bios0: vendor Compaq version "P24" date 05/01/2004
> bios0: Compaq ProLiant DL380 G2
> acpi0 at bios0: rev 0, can't enable ACPI
> bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000 0xcc000/0x1800 0xee000/0x2000!
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20HE Host" rev 0x23
> pci1 at pchb0 bus 1
> ppb0 at pci1 dev 3 function 0 "Intel S21152BB PCI-PCI" rev 0x00
> pci2 at ppb0 bus 2
> vga1 at pci2 dev 0 function 0 "ATI Rage XL" rev 0x27
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> "Compaq Netelligent ASMC" rev 0x00 at pci2 dev 1 function 0 not configured
> vendor "Compaq", unknown product 0x005a (class memory subclass
> miscellaneous, rev 0x00) at pci2 dev 2 function 0 not configured
> vendor "Compaq", unknown product 0x00b1 (class memory subclass
> miscellaneous, rev 0x01) at pci2 dev 4 function 0 not configured
> pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20HE Host" rev 0x01
> pchb2 at pci0 dev 0 function 2 "ServerWorks CNB20HE Host" rev 0x01
> pchb3 at pci0 dev 0 function 3 "ServerWorks CNB20HE Host" rev 0x01
> pci3 at pchb3 bus 7
> "Compaq PCI Hotplug" rev 0x12 at pci3 dev 7 function 0 not configured
> ciss0 at pci0 dev 1 function 0 "Compaq Smart Array 5i/532 rev.2" rev 0x01:
> irq 3
> ciss0: 1 LD, HW rev 1, FW 2.62/2.62
> scsibus0 at ciss0: 1 targets
> sd0 at scsibus0 targ 0 lun 0: <COMPAQ, LOGICAL VOLUME, 2.62> SCSI0
> 0/direct fixed
> sd0: 34719MB, 4426 cyl, 255 head, 63 sec, 512 bytes/sec, 71106240 sec total
> fxp0 at pci0 dev 2 function 0 "Intel 8255x" rev 0x08, i82559: irq 5,
> address 00:08:02:58:58:9c
> inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
> fxp1 at pci0 dev 4 function 0 "Intel 8255x" rev 0x08, i82559: irq 7,
> address 00:08:02:58:58:9b
> inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4
> "Compaq Netelligent ASMC" rev 0x00 at pci0 dev 6 function 0 not configured
> piixpm0 at pci0 dev 15 function 0 "ServerWorks OSB4" rev 0x51: SMBus disabled
It looks like SMBus is disabled on your box. If you can find a way to
enable it, you'll have a somewhat higher chance of finding some
sensors.
Cheers,
Constantine.
> pciide0 at pci0 dev 15 function 1 "ServerWorks OSB4 IDE" rev 0x00: DMA
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus1 at atapiscsi0: 2 targets
> cd0 at scsibus1 targ 0 lun 0: <COMPAQ, CD-ROM SN-124, N104> SCSI0
> 5/cdrom removable
> cd0(pciide0:0:0): using PIO mode 4
> ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x04:
> irq 11, version 1.0, legacy support
> usb0 at ohci0: USB revision 1.0
> uhub0 at usb0 "ServerWorks OHCI root hub" rev 1.00/1.00 addr 1
> isa0 at mainbus0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> biomask ef4d netmask efed ttymask ffef
> mtrr: Pentium Pro MTRR support
> softraid0 at root
> root on sd0a swap on sd0b dump on sd0b
