Hello:
I recently decided to try OpenBSD. I successfully installed on a Sony Vaio
PCG-672R laptop. (Actually, I have successfully installed OpenBSD 3 or 4
times now, and X-windows, and (i think) KDE. Practice makes perfect when I
am trying to learn something new.)
Anyway, I also have a Netgear WG511 (v1) pcmcia wireless network card. I
have been unable to get this to work. I have looked at the man page for
pgt, and done some searching over the last week on the web, but am unable to
figure this out. The pcmcia card did work successfully in the past under
MSwindows 2k and XP.
So, after installing the system, downloading and "pkg_add" from
http://www.nazgul.ch/pgt/pgt-firmware-1.1.tgz (well actually, i used
http://www.nazgul.ch/pgt/pgt-firmware-1.2.tgz), i plug in the card and get:
Feb 1 11:10:11 sam /bsd: pgt0 at cardbus0 dev 0 function 0 "Intersil,
ISL3890, -": irq 3
Feb 1 11:10:12 sam /bsd: pgt0: not responding
So, the card is identified, but that's it. I am not even sure if this is a
hardware error or a software error.
Any help or suggestions would be great.
dmesg is below
Thanks
bye - ted
OpenBSD 4.2 (GENERIC) #375: Tue Aug 28 10:38:44 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Mobile Intel(R) Pentium(R) 4 - M CPU 2.00GHz ("GenuineIntel"
686-class) 1.99 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS
,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem = 267415552 (255MB)
avail mem = 250920960 (239MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 04/22/03, BIOS32 rev. 0 @ 0xfd891,
SMBIOS rev. 2.31 @ 0xd8010 (15 entries)
bios0: vendor Phoenix Technologies LTD version "R0202B3" date 04/22/03
bios0: Sony Corporation PCG-V505BC(UC)
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xfd890/0x770
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf50/144 (7 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0x10000 0xd8000/0x4000! 0xdc000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845 Host" rev 0x04
ppb0 at pci0 dev 1 function 0 "Intel 82845 AGP" rev 0x04
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M6 LY" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x42
pci2 at ppb1 bus 2
cbb0 at pci2 dev 5 function 0 "Ricoh 5C475 CardBus" rev 0xb8: irq 3
"Ricoh 5C551 Firewire" rev 0x00 at pci2 dev 5 function 1 not configured
ohci0 at pci2 dev 7 function 0 "NEC USB" rev 0x43: irq 9, version 1.0,
legacy support
ohci1 at pci2 dev 7 function 1 "NEC USB" rev 0x43: irq 10, version 1.0,
legacy support
ehci0 at pci2 dev 7 function 2 "NEC USB" rev 0x04: irq 3
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: NEC EHCI root hub, rev 2.00/1.00, addr 1
fxp0 at pci2 dev 8 function 0 "Intel PRO/100 VE" rev 0x42, i82562: irq 10,
address 08:00:46:ad:9e:c5
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
usb1 at ohci0: USB revision 1.0
uhub1 at usb1: NEC OHCI root hub, rev 1.00/1.00, addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2: NEC OHCI root hub, rev 1.00/1.00, addr 1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801CAM LPC" rev 0x02: 24-bit
timer at 3579545Hz: SpeedStep
pciide0 at pci0 dev 31 function 1 "Intel 82801CAM IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <IC25N040ATMR04-0>
wd0: 16-sector PIO, LBA48, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJDA745 DVD/CDRW, 1.05> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801CA/CAM SMBus" rev 0x02:
polling
iic0 at ichiic0
auich0 at pci0 dev 31 function 5 "Intel 82801CA/CAM AC97" rev 0x02: irq 9,
ICH3 AC97
ac97: codec id 0x594d4803 (Yamaha YMF753-S)
ac97: codec features 18 bit DAC, No 3D Stereo
audio0 at auich0
"Intel 82801CA/CAM Modem" rev 0x02 at pci0 dev 31 function 6 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask effd netmask effd ttymask ffff
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
umass0 at uhub2 port 2 configuration 1 interface 0
umass0: Sony USB Memory Stick Slot, rev 1.10/1.90, addr 2
umass0: using ATAPI over CBI with CCI
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <Sony, MSC-U03, 2.00> SCSI0 0/direct removable
sd0: drive offline
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a swap on wd0b dump on wd0b
pgt0 at cardbus0 dev 0 function 0 "Intersil, ISL3890, -": irq 3
pgt0: not responding
