On 13/01/2008, Deanna Phillips <[EMAIL PROTECTED]> wrote:
> Please try with -current.

Current installed. Still the same behavior. The mute led on kb is
light, and I can't turn it off. It works to stream with mplayer.. but
no should comes out of the hardware :(

# mixerctl -a
outputs.dac.source=hdaudio
outputs.speaker.source=dac2
outputs.speaker.mute=off
outputs.speaker=124,124
inputs.speaker=0,0
outputs.speaker.dir=output
outputs.speaker.boost=off
outputs.speaker.eapd=off
outputs.headphones.sour=dac2
outputs.headphones.mute=off
outputs.headphones=124,124
outputs.headphones.boos=off
outputs.line.mute=off
outputs.line=132
inputs.mic=0,0
outputs.line2.source=dac2
outputs.line2.mute=off
outputs.line2=124,124
inputs.line2=85,85
outputs.line2.dir=output
inputs.sel.source=dac2
inputs.sel2.source=beep
outputs.sel2.mute=off
outputs.sel2=119
outputs.sel3.mute=off
outputs.sel3=120,120
outputs.sel4.mute=off
outputs.sel4=120,120
outputs.sel5.mute=off
outputs.sel5=120,120
outputs.pow.source=sel2
inputs.sel6.source=mix
outputs.sel6.mute=off
outputs.sel6=119,119
outputs.mic2.source=dac2
outputs.mic2.mute=off
outputs.mic2=124,124
inputs.mic2=85,85
outputs.mic2.dir=output
outputs.sel7.mute=off
outputs.sel7=120,120
outputs.sel8.mute=off
outputs.sel8=120,120
outputs.sel9.mute=off
outputs.sel9=120,120
outputs.sel10.mute=off
outputs.sel10=120,120
outputs.sel11.mute=off
outputs.sel12.mute=off
inputs.usingdac=03

OpenBSD 4.2-current (GENERIC) #646: Wed Jan  9 15:49:30 MST 2008
    [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) M CPU 440 @ 1.86GHz ("GenuineIntel"
686-class) 1.87 GHz
cpu0: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,SSE3,MWAIT,TM2,xTPR
real mem  = 1064726528 (1015MB)
avail mem = 1021624320 (974MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/18/06, BIOS32 rev. 0 @
0xf0000, SMBIOS rev. 2.4 @ 0xfbbe2 (23 entries)
bios0: vendor Hewlett-Packard version "68YGU Ver. F.0A" date 12/18/2006
bios0: Hewlett-Packard HP Compaq nx7300 (GB904ET#AK8)
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP SLIC HPET APIC MCFG TCPA SSDT SSDT SSDT SSDT
acpi0: wakeup devices C098(S5) C225(S5) C0FA(S3) C0FB(S3) C0FC(S3)
C0FD(S3) C114(S5) C22F(S5) C11A(S5) C230(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
OpenBSD 4.2-current (GENERIC) #646: Wed Jan  9 15:49:30 MST 2008
    [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) M CPU 440 @ 1.86GHz ("GenuineIntel"
686-class) 1.87 GHz
cpu0: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,SSE3,MWAIT,TM2,xTPR
real mem  = 1064726528 (1015MB)
avail mem = 1021624320 (974MB)
User Kernel Config
UKC> disable acpi
414 acpi0 disabled
UKC> quit
Continuing...
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/18/06, BIOS32 rev. 0 @
0xf0000, SMBIOS rev. 2.4 @ 0xfbbe2 (23 entries)
bios0: vendor Hewlett-Packard version "68YGU Ver. F.0A" date 12/18/2006
bios0: Hewlett-Packard HP Compaq nx7300 (GB904ET#AK8)
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf07c0/192 (10 entries)
pcibios0: bad IRQ table checksum
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xff880/192 (10 entries)
pcibios0: PCI Exclusive IRQs: 5 10 11
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FBM LPC" rev 0x00)
pcibios0: PCI bus #32 is the last bus
bios0: ROM list: 0xc0000/0x10000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
agp0 at pchb0: aperture at 0xe0000000, size 0x10000000
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: irq 10
azalia0: codec[s]: Analog Devices/0x1981, AT&T/Lucent/0x1040, using
Analog Devices/0x1981
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: irq 10
pci1 at ppb0 bus 8
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: irq 11
pci2 at ppb1 bus 16
bwi0 at pci2 dev 0 function 0 "Broadcom BCM4311" rev 0x01: irq 11,
address 00:1a:73:68:86:cf
ppb2 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01: irq 10
pci3 at ppb2 bus 32
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: irq 10
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: irq 11
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: irq 11
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: irq 10
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: irq 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1
pci4 at ppb3 bus 2
cbb0 at pci4 dev 6 function 0 "TI PCIXX12 CardBus" rev 0x00: irq 11
"TI PCIXX12 FireWire" rev 0x00 at pci4 dev 6 function 1 not configured
bce0 at pci4 dev 14 function 0 "Broadcom BCM4401B1" rev 0x02: irq 10,
address 00:17:a4:e7:c2:e5
bmtphy0 at bce0 phy 1: BCM4401 10/100baseTX PHY, rev. 0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x10, lattimer 0x20
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, CD/DVDW TS-L632D, HH17> SCSI0
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x01: irq 10, AHCI 1.1
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, Hitachi HTS54168, SB2O> SCSI3 0/direct fixed
sd0: 76319MB, 9729 cyl, 255 head, 63 sec, 512 bytes/sec, 156301488 sec total
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask effd netmask effd ttymask ffff
mtrr: Pentium Pro MTRR support
softraid0 at root
root on sd0a swap on sd0b dump on sd0b

Reply via email to