Good afternoon.
I have a Supermicro 1011S-MR2B server with one of their H8SSL-i2
motherboards, and an Opteron 1210 CPU and 40 GB Western Digital SATA drive.
The system runs perfectly fine and has no problems fscking all
partitions on the release version of 4.1 with all the errata relevant to
amd64 applied. I recently attempted to upgrade the system to 4.2
using the release CDs. The amd64 cd boots fine, but when the upgrade
process goes to fsck the root device, I get all manner of IDE timeouts.
I also tried booting the GENERIC 4.2 kernel as provided on the
website, and that experiences the same error messages. I did try
attempting to point 4.2 at /dev/sd0, but was told "No such device".
Googling the mailing lists hasn't turned up anything similar, so I'm
asking here if anyone's seen this and possibly has a resolution.
Thank you for your time.
Bob Healey
Dmesg:
-bash-3.2$ uname -a
OpenBSD pisces.phys.rpi.edu 4.1 GENERIC.MP#2 amd64
-bash-3.2$ dmesg
OpenBSD 4.1 (GENERIC.MP) #2: Mon Oct 1 16:13:54 EDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 1073278976 (1048124K)
avail mem = 907399168 (886132K)
using 22937 buffers containing 107536384 bytes (105016K) of memory
mainbus0 (root)
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xfbcf0 (50 entries)
bios0: Supermicro H8SSL-I2
acpi at mainbus0 not configured
mainbus0: Intel MP Specification (Version 1.4)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Dual-Core AMD Opteron(tm) Processor 1210, 1795.78 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Dual-Core AMD Opteron(tm) Processor 1210, 1795.50 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
64b/line 16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type PCI
mpbios: bus 3 is type ISA
ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 11, 16 pins
ioapic1 at mainbus0 apid 3 pa 0xfec01000, version 11, 16 pins
ioapic2 at mainbus0 apid 4 pa 0xfec02000, version 11, 16 pins
pci0 at mainbus0 bus 0: configuration mode 1
ppb0 at pci0 dev 1 function 0 "ServerWorks HT-1000 PCI" rev 0x00
pci1 at ppb0 bus 1
ppb1 at pci1 dev 13 function 0 "ServerWorks HT-1000 PCIX" rev 0xb2
pci2 at ppb1 bus 2
bge0 at pci2 dev 3 function 0 "Broadcom BCM5704C" rev 0x10, BCM5704 B0
(0x2100): apic 3 int 8 (irq 9), address 00:30:48:5e:6e:06
brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
bge1 at pci2 dev 3 function 1 "Broadcom BCM5704C" rev 0x10, BCM5704 B0
(0x2100): apic 3 int 9 (irq 5), address 00:30:48:5e:6e:07
brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
pciide0 at pci1 dev 14 function 0 "ServerWorks HT-1000 SATA" rev 0x00: DMA
pciide0: using apic 2 int 11 (irq 11) for native-PCI interrupt
pciide0: port 0: device present, speed: 1.5Gb/s
wd0 at pciide0 channel 0 drive 0: <WDC WD400JD-22MSA1>
wd0: 16-sector PIO, LBA48, 38166MB, 78165360 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: port 1: PHY offline
pciide0: port 2: PHY offline
pciide0: port 3: PHY offline
pciide1 at pci1 dev 14 function 1 "ServerWorks HT-1000 SATA" rev 0x00
piixpm0 at pci0 dev 2 function 0 "ServerWorks HT-1000" rev 0x00: polling
iic0 at piixpm0
iic0: addr 0x2f 00=80 05=a1 06=ff 07=a1 08=ff 09=64 0a=64 0b=5e 0c=73
0d=5c 0e=7b 0f=12 10=a4 11=2c 13=ff 14=20 15=70 16=d2 17=79 18=ce 19=cd
1a=c1 1b=0d 1c=11 1d=9d 1e=80 1f=80 20=16 21=4a 22=01 24=87 26=87 27=0f
29=0f 2b=0f 3b=ff 3c=ff 3d=ff 3e=ff 3f=ff 40=09 41=f1 42=01 46=f7 47=ff
48=f3 49=7f 4a=3f 4b=02 4d=70 50=1e 51=02 52=01 58=80 59=01 5c=03 5e=55
5f=03 60=ca 61=87 62=ca 63=87 64=ff 66=ff 67=ff 68=3f 6a=2b 6b=18 6c=7c
6d=65 6e=e3 6f=b9 70=8a 71=70 72=e5 73=bb 74=e5 75=bb 76=e3 77=b9 78=46
79=41 7a=46 7b=41 7c=46 7d=5f 7e=55 7f=50 80=64 81=5f 82=55 83=50 84=64
85=5f 86=55 87=50 88=46 89=41 8a=55 8b=50 8c=64 8d=5f 8e=55 8f=50 90=07
91=68 92=07 93=68 94=07 95=68 96=07 97=68 98=07 99=68 9a=07 9b=68 9c=07
9d=68 9e=ff 9f=ff a0=ff a1=ff a2=ff a3=ff a4=ff a5=ff a6=ff a7=ff a8=ed
ae=ff af=ff b1=04 b2=30 b3=30 b4=30 b5=1b b6=30 b7=30 b8=30 b9=30 ba=30
bb=89 bc=89 bd=89 be=89 bf=89 c0=89 c1=89 c2=89 c3=01 c4=01 c5=7f c6=ff
c9=ff ca=ff cb=ff cc=ff cd=ff ce=ff cf=ff d1=46 d2=46 d3=46 d4=46 d6=f0
d7=ff d8=80 d9=01 da=80 db=01 dc=80 dd=01 de=80 df=01 e0=bb e1=c0 e2=82
e3=fe e4=80 e5=e8 e6=fe e7=12 e8=11 e9=11 ea=c2 eb=aa ec=ff ed=ff ee=ff
ef=ff f6=60 f7=80 f8=1b fa=ff fd=10
piixpm0: exec: op 1, addr 0x4b, cmdlen 1, len 1, flags 0x08: timeout,
status 0x9<BUSY,BUSERR>
pciide2 at pci0 dev 2 function 1 "ServerWorks HT-1000 IDE" rev 0x00: DMA
atapiscsi0 at pciide2 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E-N, 1.AA> SCSI0 5/cdrom
removable
cd0(pciide2:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 0
pcib0 at pci0 dev 2 function 2 "ServerWorks HT-1000 LPC" rev 0x00
ohci0 at pci0 dev 3 function 0 "ServerWorks HT-1000 USB" rev 0x01: apic
2 int 10 (irq 10), version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ServerWorks OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1 at pci0 dev 3 function 1 "ServerWorks HT-1000 USB" rev 0x01: apic
2 int 10 (irq 10), version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: ServerWorks OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 3 function 2 "ServerWorks HT-1000 USB" rev 0x01: apic
2 int 10 (irq 10)
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: ServerWorks EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
vga1 at pci0 dev 5 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
--
Bob Healey
Systems Administrator
Physics Department, RPI
[EMAIL PROTECTED]
