Hi,
I am reporting a problem with one of our firewalls.
We are using carp.
Yesterday nagios told me that this firewalls is out.
First ssh was unavailable and a few hours later it did not even replied
to ping!
(In fact it replied, but with a large packet loss so about 80% of the
packets was lost.)
Today I had a chance to take a look and the console was full of
"cksum: out of data" messages. Pressing enter revealed the login prompt,
but it was impossible to log in because I get
"Internal resource.... error" (I did not remember the message correctly.)
I cound not even properly reboot the server, so I had to reset.
After reboot every few minutes I get these messages, so I upgraded to
the latest snapshot I a hope the it will be cure for all my problems.
Well actually it is not.
I include my dmesg. The other machine still runs fine on a same hw as this one
it is:
OpenBSD somehost.ppke.hu 4.2 GENERIC#433 i386
If you have any idea how to move forward please tell me.
This is the ill one:
OpenBSD 4.2-current (GENERIC) #558: Tue Nov 20 10:36:15 MST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Xeon(TM) CPU 2.66GHz ("GenuineIntel" 686-class) 2.66 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem = 1073225728 (1023MB)
avail mem = 1029914624 (982MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 05/11/04, BIOS32 rev. 0 @ 0xfdb54, SMBIOS
rev. 2.3 @ 0xf1260 (73 entries)
bios0: vendor Intel Corporation version "SWV25.86B.0218.P28.0405111912" date
05/11/2004
bios0: Intel SE7501WV2S
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf3630/336 (19 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801CA LPC" rev 0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x9e00 0xd2000/0x1000 0xd3000/0x1000
acpi0 at mainbus0: rev 0
acpi0: tables DSDT FACP APIC OEMR
acpi0: wakeup devices PS2M(S1) PS2K(S1) UAR1(S5) UAR2(S5) USB1(S1) USB2(S1)
SMB0(S1) P0P1(S5) P5P6(S5) P5P7(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P1)
acpiprt2 at acpi0: bus 3 (P5P6)
acpiprt3 at acpi0: bus 4 (P5P7)
acpiec0 at acpi0
acpicpu0 at acpi0
ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca2/2 spacing 1 irq 0
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7501 MCH Host" rev 0x01
"Intel E7500 DRAM" rev 0x01 at pci0 dev 0 function 1 not configured
ppb0 at pci0 dev 3 function 0 "Intel E7500 MCH" rev 0x01
pci1 at ppb0 bus 2
"Intel 82870P2 IOxAPIC" rev 0x04 at pci1 dev 28 function 0 not configured
ppb1 at pci1 dev 29 function 0 "Intel 82870P2 PCIX-PCIX" rev 0x04
pci2 at ppb1 bus 4
ahd0 at pci2 dev 7 function 0 "Adaptec AIC-7902 U320" rev 0x03: irq 9
ahd0: aic7902, U320 Wide Channel A, SCSI Id=7, PCI-X 67-100MHz, 512 SCBs
scsibus0 at ahd0: 16 targets
ahd1 at pci2 dev 7 function 1 "Adaptec AIC-7902 U320" rev 0x03: irq 9
ahd1: aic7902, U320 Wide Channel B, SCSI Id=7, PCI-X 67-100MHz, 512 SCBs
scsibus1 at ahd1: 16 targets
sd0 at scsibus1 targ 0 lun 0: <FUJITSU, MAP3367NC, 0108> SCSI3 0/direct fixed
sd0: 35046MB, 48122 cyl, 2 head, 745 sec, 512 bytes/sec, 71775284 sec total
sd1 at scsibus1 targ 1 lun 0: <FUJITSU, MAP3367NC, 0108> SCSI3 0/direct fixed
sd1: 35046MB, 48122 cyl, 2 head, 745 sec, 512 bytes/sec, 71775284 sec total
safte0 at scsibus1 targ 6 lun 0: <ESG-SHV, SCA HSBP M22, 0.06> SCSI2
3/processor fixed
"Intel 82870P2 IOxAPIC" rev 0x04 at pci1 dev 30 function 0 not configured
ppb2 at pci1 dev 31 function 0 "Intel 82870P2 PCIX-PCIX" rev 0x04
pci3 at ppb2 bus 3
em0 at pci3 dev 7 function 0 "Intel PRO/1000MT (82546EB)" rev 0x01: irq 9,
address 00:0e:0c:30:a1:34
em1 at pci3 dev 7 function 1 "Intel PRO/1000MT (82546EB)" rev 0x01: irq 9,
address 00:0e:0c:30:a1:35
fxp0 at pci3 dev 8 function 0 "Intel 8255x" rev 0x0c, i82550: irq 9, address
00:02:b3:f0:5a:cb
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
em2 at pci3 dev 9 function 0 "Intel PRO/1000MT (82545EM)" rev 0x01: irq 9,
address 00:07:e9:1b:5a:b1
"Intel E7500 MCH" rev 0x01 at pci0 dev 3 function 1 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801CA/CAM USB" rev 0x02: irq 9
uhci1 at pci0 dev 29 function 1 "Intel 82801CA/CAM USB" rev 0x02: irq 10
ppb3 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x42
pci4 at ppb3 bus 1
vga1 at pci4 dev 12 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 82801CA LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801CA IDE" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
atapiscsi0 at pciide0 channel 1 drive 0
scsibus2 at atapiscsi0: 2 targets
cd0 at scsibus2 targ 0 lun 0: <SAMSUNG, CD-ROM SN-124, N102> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801CA/CAM SMBus" rev 0x02: irq 11
iic0 at ichiic0
iic0: skipping sensors to avoid ipmi0 interactions
spdmem0 at iic0 addr 0x52: 512MB DDR SDRAM registered ECC PC2300CL2.5
spdmem1 at iic0 addr 0x56: 512MB DDR SDRAM registered ECC PC2300CL2.5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb1 at uhci1: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ffe5 netmask ffe5 ttymask ffe7
mtrr: Pentium Pro MTRR support
ahd1: target 0 synchronous with period = 0x8, offset = 0x7f(DT|IU|QAS)
dkcsum: sd0 matches BIOS drive 0x80
ahd1: target 1 synchronous with period = 0x8, offset = 0x7f(DT|IU|QAS)
dkcsum: sd1 matches BIOS drive 0x81
root on sd0a swap on sd0b dump on sd0b
cksum: out of data
cksum: out of data
cksum: out of data
cksum: out of data
cksum: out of data
cksum: out of data
cksum: out of data
cksum: out of data
cksum: out of data
cksum: out of data
cksum: out of data
cksum: out of data
cksum: out of data
cksum: out of data
cksum: out of data
cksum: out of data
cksum: out of data
cksum: out of data
cksum: out of data
cksum: out of data
cksum: out of data
cksum: out of data
cksum: out of data
cksum: out of data
cksum: out of data
cksum: out of data
cksum: out of data
cksum: out of data
cksum: out of data
cksum: out of data
Regards,
cstamas
--
CSILLAG Tamas (cstamas) - http://digitus.itk.ppke.hu/~cstamas
Programming today is a race between software engineers striving to build
bigger and better idiot-proof programs, and the Universe trying to produce
bigger and better idiots. So far, the Universe is winning.
-- Rich Cook
