Hi Folks,
I am running, or at least trying to run, OpenBSD 4.2 on a minipc using
AMD's GEODE LX-800.
(Its a
http://www.sdlsystem.se/shop/product_info.php?cPath=23_56&products_id=65
6 )
At first I had almost given up, since trying to boot the system was
impossible
since I always got a kernel-panic just a few seconds into the booting.
Similar problems with both FreeBSD and NetBSD, <whisper>but linux worked
w/o issues.</whisper>
But after booting with all powersave turned off, everything looked good
though,
and I could finally start to install and configure....almost.
After building a new custom kernel that didnt work properly, re-trying
with
the GENERIC kernel that can be downloaded from the i386
install-directory(didnt work),
rebuilding a new GENERIC kerneln (didnt work), I finally managed to
understand
that the ONLY to kernels I can boot with, is either the bsd.rd ramdisk,
or the
bsd-kernel thats stored in the install32.iso!?!
All the others startup fine, no problem, but the network interfaces(
realtek, rl0-3)
cant be configured! Dmesg looks almost identical for a working and
non-working kernel,
but with all the nonworking one's, i just get
# ifconfig -a
: no such interface.
Not even loopback gets created!
It looks like the working kernel is from 4.2-current, so I am really
just wondering
wether this is my only solution, to start running -current, or if there
is a bug somewhere
that might be fixed....if nothing else, it would be nice to be able to
turn on power-save
functions on the box again.
Any thoughts? (attaching the two dmesgs...)
Regards
Taisto Qvist
<<dmesg.515.txt>> <<dmesg.375.txt>>
OpenBSD 4.2 (GENERIC) #375: Tue Aug 28 10:38:44 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Geode(TM) Integrated Processor by AMD PCS ("AuthenticAMD" 586-class) 499
MHz
cpu0: FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX
real mem = 1047097344 (998MB)
avail mem = 1004806144 (958MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/05/07, BIOS32 rev. 0 @ 0xf0010, SMBIOS
rev. 2.5 @ 0xf9580 (53 entries)
bios0: vendor American Megatrends Inc. version "080014 " date 06/05/2007
bios0: Advanced Micro Devices, Inc. Geode LX Norwich Development Board
pcibios0 at bios0: rev 3.0 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf3ab0/144 (7 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0x1022 product 0x2090
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 1 function 0 "AMD Geode LX" rev 0x31
vga1 at pci0 dev 1 function 1 "AMD Geode LX Video" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
glxsb0 at pci0 dev 1 function 2 "AMD Geode LX Crypto" rev 0x00: RNG AES
rl0 at pci0 dev 10 function 0 "Realtek 8139" rev 0x10: irq 15, address
00:04:a7:04:da:2f
rlphy0 at rl0 phy 0: RTL internal PHY
rl1 at pci0 dev 11 function 0 "Realtek 8139" rev 0x10: irq 5, address
00:04:a7:04:da:30
rlphy1 at rl1 phy 0: RTL internal PHY
rl2 at pci0 dev 12 function 0 "Realtek 8139" rev 0x10: irq 11, address
00:04:a7:04:da:31
rlphy2 at rl2 phy 0: RTL internal PHY
rl3 at pci0 dev 13 function 0 "Realtek 8139" rev 0x10: irq 10, address
00:04:a7:04:da:32
rlphy3 at rl3 phy 0: RTL internal PHY
pcib0 at pci0 dev 15 function 0 "AMD CS5536 ISA" rev 0x03
pciide0 at pci0 dev 15 function 2 "AMD CS5536 IDE" rev 0x01: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <SAMSUNG HM120JC>
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ohci0 at pci0 dev 15 function 4 "AMD CS5536 USB" rev 0x02: irq 10, version 1.0,
legacy support
ehci0 at pci0 dev 15 function 5 "AMD CS5536 USB" rev 0x02: irq 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: AMD EHCI root hub, rev 2.00/1.00, addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
usb1 at ohci0: USB revision 1.0
uhub1 at usb1: AMD OHCI root hub, rev 1.00/1.00, addr 1
biomask 774d netmask ff6d ttymask ffef
pctr: user-level cycle counter enabled
mtrr: K6-family MTRR support (2 registers)
umass0 at uhub0 port 2 configuration 1 interface 0
umass0: LaCie LaCie DVDRW USB, rev 2.00/0.00, addr 2
umass0: using ATAPI over Bulk-Only
scsibus0 at umass0: 2 targets
cd0 at scsibus0 targ 1 lun 0: <_NEC, DVD+-RW ND-6650A, 1.23> SCSI0 5/cdrom
removable
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a swap on wd0b dump on wd0b
OpenBSD 4.2 (GENERIC) #375: Tue Aug 28 10:38:44 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Geode(TM) Integrated Processor by AMD PCS ("AuthenticAMD" 586-class) 499
MHz
cpu0: FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX
real mem = 1047097344 (998MB)
avail mem = 1004806144 (958MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/05/07, BIOS32 rev. 0 @ 0xf0010, SMBIOS
rev. 2.5 @ 0xf9580 (53 entries)
bios0: vendor American Megatrends Inc. version "080014 " date 06/05/2007
bios0: Advanced Micro Devices, Inc. Geode LX Norwich Development Board
pcibios0 at bios0: rev 3.0 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf3ab0/144 (7 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0x1022 product 0x2090
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 1 function 0 "AMD Geode LX" rev 0x31
vga1 at pci0 dev 1 function 1 "AMD Geode LX Video" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
glxsb0 at pci0 dev 1 function 2 "AMD Geode LX Crypto" rev 0x00: RNG AES
rl0 at pci0 dev 10 function 0 "Realtek 8139" rev 0x10: irq 15, address
00:04:a7:04:da:2f
rlphy0 at rl0 phy 0: RTL internal PHY
rl1 at pci0 dev 11 function 0 "Realtek 8139" rev 0x10: irq 5, address
00:04:a7:04:da:30
rlphy1 at rl1 phy 0: RTL internal PHY
rl2 at pci0 dev 12 function 0 "Realtek 8139" rev 0x10: irq 11, address
00:04:a7:04:da:31
rlphy2 at rl2 phy 0: RTL internal PHY
rl3 at pci0 dev 13 function 0 "Realtek 8139" rev 0x10: irq 10, address
00:04:a7:04:da:32
rlphy3 at rl3 phy 0: RTL internal PHY
pcib0 at pci0 dev 15 function 0 "AMD CS5536 ISA" rev 0x03
pciide0 at pci0 dev 15 function 2 "AMD CS5536 IDE" rev 0x01: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <SAMSUNG HM120JC>
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ohci0 at pci0 dev 15 function 4 "AMD CS5536 USB" rev 0x02: irq 10, version 1.0,
legacy support
ehci0 at pci0 dev 15 function 5 "AMD CS5536 USB" rev 0x02: irq 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: AMD EHCI root hub, rev 2.00/1.00, addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
usb1 at ohci0: USB revision 1.0
uhub1 at usb1: AMD OHCI root hub, rev 1.00/1.00, addr 1
biomask 774d netmask ff6d ttymask ffef
pctr: user-level cycle counter enabled
mtrr: K6-family MTRR support (2 registers)
umass0 at uhub0 port 2 configuration 1 interface 0
umass0: LaCie LaCie DVDRW USB, rev 2.00/0.00, addr 2
umass0: using ATAPI over Bulk-Only
scsibus0 at umass0: 2 targets
cd0 at scsibus0 targ 1 lun 0: <_NEC, DVD+-RW ND-6650A, 1.23> SCSI0 5/cdrom
removable
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a swap on wd0b dump on wd0b
