Hello.  I've installed OpenBSD 4.2 on a 512M CF for use with the alix2c2.

The system boots with problems (but works fine so far) when the CF is
hooked up in my desktop with an IDE adapter.  The error message I get is
in the dmesg below.

But the OS won't even boot in the alix board.  And there's nothing in
var/log/messages.  A null modem cable is on order for me, so I have no
info yet through minicom.  The alix board is straight out of the box -
with whichever bios PC Engines had on it when it was shipped out a week
ago.

The lack of anything in /var/log/messages is what tells me the system
isn't booting.  Also I can ping neither vr0 nor vr1 on the alix.  With the
same card booted on the desktop I can see the network fine.

The packages installed on the card (all loaded into /) are bsd,
base42.tgz, etc42.tgz and man42.tgz only.

Again, the dmesg below is from the successful boot of the CF card in a
desktop machine.

Any suggestions on what the problem is, and possibly a resolution?  I've
scanned these archives and looked through about a dozen sites on how to
install OpenBSD on a CF for Wrap and Soekris.  One possible reason I've
found is that the CF card may need to be UDMA.  It isn't, and the alix
documentation only mentions DMA.

In the meantime, has anyone had better luck using flashdist as a means of
installing?

Here's the dmesg:

Nov 27 13:52:06 alix syslogd: start
Nov 27 13:52:06 alix /bsd: OpenBSD 4.2 (GENERIC) #375: Tue Aug 28 10:38:44
MDT 2007
Nov 27 13:52:06 alix /bsd:    
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
Nov 27 13:52:06 alix /bsd: cpu0: Intel Pentium III ("GenuineIntel"
686-class, 512KB L2 cache) 448 MHz Nov 27 13:52:06 alix /bsd: cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
Nov 27 13:52:06 alix /bsd: real mem  = 402219008 (383MB)
Nov 27 13:52:07 alix /bsd: avail mem = 381022208 (363MB)
Nov 27 13:52:07 alix /bsd: mainbus0 at root
Nov 27 13:52:07 alix /bsd: bios0 at mainbus0: AT/286+ BIOS, date 07/20/99,
BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.2 @ 0xfb5f0 (83 entries)
Nov 27 13:52:07 alix /bsd: bios0: vendor Dell Computer Corporation version
"A09" date 07/20/99
Nov 27 13:52:07 alix /bsd: bios0: Dell Computer Corporation Precision
WorkStation 410 MT
Nov 27 13:52:07 alix /bsd: apm0 at bios0: Power Management spec V1.2
Nov 27 13:52:07 alix /bsd: apm0: AC on, battery charge unknown
Nov 27 13:52:07 alix /bsd: apm0: flags 30102 dobusy 0 doidle 1
Nov 27 13:52:07 alix /bsd: pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
Nov 27 13:52:07 alix /bsd: pcibios0: PCI IRQ Routing Table rev 1.0 @
0xfcac0/192 (10 entries)
Nov 27 13:52:07 alix /bsd: pcibios0: PCI Interrupt Router at 000:07:0
("Intel 82371FB ISA" rev 0x00)
Nov 27 13:52:07 alix /bsd: pcibios0: PCI bus #2 is the last bus
Nov 27 13:52:07 alix /bsd: bios0: ROM list: 0xc0000/0xf800 0xcf800/0x800
0xd0000/0x800 0xd0800/0x3800
Nov 27 13:52:07 alix /bsd: cpu0 at mainbus0
Nov 27 13:52:08 alix /bsd: pci0 at mainbus0 bus 0: configuration mode 1
(no bios)
Nov 27 13:52:08 alix /bsd: pchb0 at pci0 dev 0 function 0 "Intel 82443BX
AGP" rev 0x03
Nov 27 13:52:08 alix /bsd: ppb0 at pci0 dev 1 function 0 "Intel 82443BX
AGP" rev 0x03
Nov 27 13:52:08 alix /bsd: pci1 at ppb0 bus 1
Nov 27 13:52:08 alix /bsd: piixpcib0 at pci0 dev 7 function 0 "Intel
82371AB PIIX4 ISA" rev 0x02
Nov 27 13:52:08 alix /bsd: pciide0 at pci0 dev 7 function 1 "Intel 82371AB
IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to
compatibility
Nov 27 13:52:08 alix /bsd: wd0 at pciide0 channel 0 drive 0: <SAMSUNG
SP0822N>
Nov 27 13:52:08 alix /bsd: wd0: 16-sector PIO, LBA48, 32253MB, 66055248
sectors
Nov 27 13:52:08 alix /bsd: atapiscsi0 at pciide0 channel 0 drive 1
Nov 27 13:52:08 alix /bsd: scsibus0 at atapiscsi0: 2 targets
Nov 27 13:52:08 alix /bsd: cd0 at scsibus0 targ 0 lun 0: <TDK, CDRW8432,
1.05> SCSI0 5/cdrom removable
Nov 27 13:52:09 alix /bsd: wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA
mode 2
Nov 27 13:52:09 alix /bsd: cd0(pciide0:0:1): using PIO mode 4, DMA mode 2
Nov 27 13:52:10 alix /bsd: wd1 at pciide0 channel 1 drive 0: <SanDisk
SDCFB-512>
Nov 27 13:52:10 alix /bsd: wd1: 4-sector PIO, LBA, 488MB, 1000944 sectors
Nov 27 13:52:11 alix /bsd: wd1(pciide0:1:0): using PIO mode 4, DMA mode 2
Nov 27 13:52:12 alix /bsd: uhci0 at pci0 dev 7 function 2 "Intel 82371AB
USB" rev 0x01: irq 11
Nov 27 13:52:13 alix /bsd: piixpm0 at pci0 dev 7 function 3 "Intel 82371AB
Power" rev 0x02: SMBus disabled
Nov 27 13:52:13 alix /bsd: vga1 at pci0 dev 14 function 0 "NVIDIA GeForce4
MX 4000" rev 0xc1
Nov 27 13:52:13 alix /bsd: wsdisplay0 at vga1 mux 1: console (80x25, vt100
emulation)
Nov 27 13:52:13 alix /bsd: xl0 at pci0 dev 17 function 0 "3Com 3c905B
100Base-TX" rev 0x00: irq 11, address 00:c0:4f:60:cb:b2Nov 27 13:52:14
alix /bsd: exphy0 at xl0 phy 24: 3Com internal media interface
Nov 27 13:52:14 alix /bsd: ppb1 at pci0 dev 19 function 0 "DEC 21152
PCI-PCI" rev 0x03
Nov 27 13:52:14 alix /bsd: pci2 at ppb1 bus 2
Nov 27 13:52:14 alix /bsd: ral0 at pci2 dev 9 function 0 "Ralink RT2560"
rev 0x01: irq 10, address 00:0e:3b:02:52:a0
Nov 27 13:52:14 alix /bsd: ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525
Nov 27 13:52:14 alix /bsd: ahc0 at pci2 dev 10 function 0 "Adaptec
AIC-7890/1 U2" rev 0x00: irq 11
Nov 27 13:52:14 alix /bsd: scsibus1 at ahc0: 16 targets
Nov 27 13:52:14 alix /bsd: ahc1 at pci2 dev 14 function 0 "Adaptec
AIC-7880" rev 0x01: irq 11
Nov 27 13:52:14 alix /bsd: scsibus2 at ahc1: 16 targets
Nov 27 13:52:14 alix /bsd: isa0 at piixpcib0
Nov 27 13:52:14 alix /bsd: isadma0 at isa0
Nov 27 13:52:15 alix /bsd: pckbc0 at isa0 port 0x60/5
Nov 27 13:52:15 alix /bsd: pckbd0 at pckbc0 (kbd slot)
Nov 27 13:52:15 alix /bsd: pckbc0: using irq 1 for kbd slot
Nov 27 13:52:15 alix /bsd: wskbd0 at pckbd0: console keyboard, using
wsdisplay0
Nov 27 13:52:15 alix /bsd: pmsi0 at pckbc0 (aux slot)
Nov 27 13:52:16 alix /bsd: pckbc0: using irq 12 for aux slot
Nov 27 13:52:16 alix /bsd: wsmouse0 at pmsi0 mux 0
Nov 27 13:52:16 alix /bsd: pcppi0 at isa0 port 0x61
Nov 27 13:52:16 alix /bsd: midi0 at pcppi0: <PC speaker>
Nov 27 13:52:16 alix /bsd: spkr0 at pcppi0
Nov 27 13:52:16 alix /bsd: lpt0 at isa0 port 0x378/4 irq 7
Nov 27 13:52:16 alix /bsd: npx0 at isa0 port 0xf0/16: reported by CPUID;
using exception 16
Nov 27 13:52:16 alix /bsd: pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16
byte fifo
Nov 27 13:52:16 alix /bsd: pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16
byte fifo
Nov 27 13:52:16 alix /bsd: fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
Nov 27 13:52:16 alix /bsd: fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
Nov 27 13:52:17 alix /bsd: isapnp0 at isa0 port 0x279: read port 0x203
Nov 27 13:52:17 alix /bsd: wss1 at isapnp0 "CS4236B, CSC0000, , WSS/SB"
port 0x534/4,0x388/4,0x220/16 irq 5 drq 1,0: CS4236/CS4236B (vers 0)
Nov 27 13:52:17 alix /bsd: audio0 at wss1
Nov 27 13:52:17 alix /bsd: joy0 at isapnp0 "CS4236B, CSC000F, , Game" port
0x3a0/8
Nov 27 13:52:17 alix /bsd: "CS4236B, CSC0010, , Ctrl" at isapnp0 port
0xf00/8 not configured
Nov 27 13:52:17 alix /bsd: usb0 at uhci0: USB revision 1.0
Nov 27 13:52:17 alix /bsd: uhub0 at usb0: Intel UHCI root hub, rev
1.00/1.00, addr 1
Nov 27 13:52:17 alix /bsd: biomask eb45 netmask ef45 ttymask ffc7
Nov 27 13:52:17 alix /bsd: pctr: 686-class user-level performance counters
enabled
Nov 27 13:52:17 alix /bsd: mtrr: Pentium Pro MTRR support
Nov 27 13:52:17 alix /bsd: dkcsum: wd0 matches BIOS drive 0x80
Nov 27 13:52:17 alix /bsd: wd1(pciide0:1:0): timeout
Nov 27 13:52:17 alix /bsd:      type: ata
Nov 27 13:52:17 alix /bsd:      c_bcount: 512
Nov 27 13:52:17 alix /bsd:      c_skip: 0
Nov 27 13:52:18 alix /bsd: pciide0:1:0: bus-master DMA error: missing
interrupt, status=0x21
Nov 27 13:52:18 alix /bsd: wd1c: device timeout reading fsbn 0 (wd1 bn 0;
cn 0 tn 0 sn 0), retrying
Nov 27 13:52:18 alix /bsd: wd1(pciide0:1:0): timeout
Nov 27 13:52:18 alix /bsd:      type: ata
Nov 27 13:52:18 alix /bsd:      c_bcount: 512
Nov 27 13:52:18 alix /bsd:      c_skip: 0
Nov 27 13:52:18 alix /bsd: pciide0:1:0: bus-master DMA error: missing
interrupt, status=0x21
Nov 27 13:52:18 alix /bsd: wd1: transfer error, downgrading to PIO mode 4
Nov 27 13:52:18 alix /bsd: wd1(pciide0:1:0): using PIO mode 4
Nov 27 13:52:18 alix /bsd: wd1c: device timeout reading fsbn 0 (wd1 bn 0;
cn 0 tn 0 sn 0), retrying
Nov 27 13:52:18 alix /bsd: wd1: soft error (corrected)
Nov 27 13:52:18 alix /bsd: dkcsum: wd1 matches BIOS drive 0x81
Nov 27 13:52:18 alix /bsd: root on wd1a swap on wd1b dump on wd1b
Nov 27 13:52:08 alix savecore: no core dump

Reply via email to